New Controls & Controllers Products

Switching Regulators offer 95% efficiency.

Models SR40 and SR80 are constant frequency, current mode step-up converters. Model SR40 delivers 40 W to load, accepts 5-10 V input, and provides 9, 12, 15, 18 and 24 Vdc output. Model SR80 delivers 80 W to load, accepts 10-18 V input and provides 15, 18 and 24 Vdc output. Both regulators include input undervoltage protection, external synchronization, 300 kHz constant frequency, 44 W/cu in....

Linear Drive Assembly features backlash-free design.

Linear Drive unit offers up to 800 lb axial thrust, accuracy to within Ã-

Laser Power Module suits amplifier and pump-laser testing.

Suited for use with LDC-3926 16-Channel High Power Controller, 42 W Model LDC-3926339 Laser Diode Current Source Module is for development and production testing of EDFA and Raman amplifiers and high-power pump lasers. Module provides power output of up to 6 A at 7 V, constant current/power control, external modulation, and 4-wire forward voltage measurement. Laser diode protection features such...

Controllers offer PID control of up to 8 loops.

D8 Series temperature controllers offer DeviceNet compatibility within 1/8 DIN package. Compliance with ODVA and Semiconductor SIG specifications make D8 simple to integrate into DeviceNet networks. Available in 4 and 8 loop versions, units support thermocouple, RTD, linear voltage, and current inputs. Loops can be configured for on-off or PID control, and can be combined for cascade, ratio, or...

Heated Deck Panels

Heated Deck Panels: The playbook to how these snow-free walkways work for bridges, sidewalks, and platforms

PC/104 Module includes 8 serial I/O ports.

Model PCM-COM8 8-channel, serial asynchronous communications module provides each transmit and receive channel with 128-byte deep FIFO. All 8 channels support RS-232, RS-485, and RS-422 electrical levels to interface to serial communications devices. Two XR16C854 devices serve as serial communication controllers and contain on-chip, software programmable baud rate generators with data rates...

Lay Control System reduces cable waste.

MS Lay-1 Revision 2.0, suited for cabling machines used in manufacturing of multi-conductor power, signal, and communication cables, operates using 100% digital PID Control and offers plug-and-play operation. Requiring no calibration, unit incorporates 2 x 20 character LCD display and 2 x 6 Keypad. Unit is available in 3 different line voltage configurations: 480 V/3-phase/60 HZ, 220 V/3-phase/60...

AC Outlet Power Module is offered in two versions.

IMACP AC Voltage Power Outlet Module, available in single outlet and duplex outlet versions, accepts up to 12 AWG wires and is rated at 15 A at 125 Vac. Unit incorporates stabilized AC outlet socket, terminal blocks, finger safe connections, and modular DIN rail mounted design. Applications include use in equipment cabinets, panels, and in systems where power may be required for laptops, test...

Mounting and Positioning Equipment provide metric options.

Adjustable-height, rack and pinion posts mount to M16 holes on positioning stages. Adjustable travel distances are 25 or 45 mm. Locking knob secures post's position. Metric laser holders mount helium neon lasers with twin-ring design. Small metric stage measures 24 x 30 mm and provides total travel of Ã-

Temperature Controllers suit high- and low-power applications.

Precision Series LDT-5900, for laser diodes and photonics devices, incorporates full PID closed-loop control with digital PWM TE current control. Series supports thermistor, IC, and platinum RTD sensors which can be selected and configured from front panel or GPIB interface. Model LDT-5948, 60 W TE Controller, and Model LDT-5980, 120 W TE Controller, each include 4-wire voltage sense and...

Analog I/O Modules offer HART protocol.

Designed for seamless compatibility with ControlLogix(TM) and Experion PKS(TM), 8-channel modules provide full analog capability and HART (highway addressable remote transducer) Protocol. Products maximize I/O performance by combining real-time HART data acquisition with analog acquisition and control. As HART master, modules allow communication with HART field devices, which may be interfaced...

Solve Any Large-scale Water Control Problem with the Aqua Dam Flood Barrier

Aqua Dam is the ultimate solution for large-scale water control projects. It combines lightweight, large size, and portability all in one innovative product. To learn more about the uses, and applications of Aqua Dam, or to see it in action, check out our new video to get all the details.