Motion Control Card offers high-density connectors.
Available in 4 or 8 axis configurations, full length PCI card Model PCI-XP features optically isolated I/O for each axis, including encoder feedback, limits, and home sensor inputs. Dual 12-bit D/A's for each channel provide analog outputs for either servo control or general-purpose use. Eight optically-isolated, general-purpose I/O pins can be configured by user's application. Four high-density...
Read More »
Order Fulfillment Systems offer web-based GUI.
EASYpickÃ-® and EASYputÃ-® with Graphical User Interface allow users to view information on productivity, order status, work status, workload planning, and data download status. GUI enables picker productivity to be measured against historical data or against standards set by supervisory personnel. Web-based system can be used by supervisors on any PC configured with networked web...
Read More »DC Digital Drives deliver 3 kW of continuous power.
Cello Servo Drives can operate in current, velocity, or position modes and function with variety of feedback options. They feature sinusoidal vector control, trapezoidal vector control, trapezoidal 6-step, and DC commutation methods. Two CANopen ports are installed along with one RS-232 serial port for communications. Models range from 2.25-15 A, at 3 nominal input voltage levels of 48, 85, and...
Read More »
Temperature Controller suits OEM applications.
Microprocessor-based, Series 59 uses large LEDs to display temperature and other parameters, which are programmed using 2 pushbuttons on face of device. Temperature is sensed by thermistor, RTD, thermocouple, or solid-state relay. Differential and set point offset values are fully adjustable, permitting application-specific programming. Controller accepts 24 Vac/Vdc or 120/208/240 Vac power...
Read More »
An Operations Manager's Guide To The Mobile Connected Factory of Tomorrow
This white paper provides an overview of mobile technology for managing your manufacturing facility, while also discussing the advantages of being an early adopter.
Read More »Mixed Signal Microcontroller comes in 44-pin QFP package.
Model VMX1016-QAI16, based on single cycle 8051 processor, includes 56 K in-circuit re-programmable flash memory, 1,280 bytes RAM, and 24 programmable I/O pins. Hardware Arithmetic Unit performs simultaneous 16-bit signed multiplication and 32-bit addition with inclusion of 32-bit barrel shifter. Integrated SoC features onboard IÃ-²C interface, 5-Channel 12-bit A/D Converter, four 16-bit...
Read More »Control Panel works with Canon's PTZF Camera.
Designed for use with Canon's NU-700N weatherproof PTZF camera, CPO-D-2A-NU700 Camera Controller delivers remote operations such as pan, tilt, zoom, and focus control. It also provides 4 camera presets and multiple camera operation. Additional features include shot time adjustment, auto focus/iris, iris open/close, ND (neutral density) filter, wiper control, camera bars, and camera power on/off.
Read More »Camera Controller is used with Sony PTZ cameras.
Designed for Sony EVI-D100, EVI-D70, and BRC-300 PTZ cameras, CP-ITV Camera Controller provides remote control operation of pan, tilt, zoom, and focus. It also offers preset positions for use with up to 4 cameras. Unit allows users to employ multiple cameras in true systems configuration with joystick camera control capabilities. It is suited for broadcast applications, teleconferencing, and...
Read More »
Motor Controllers incorporate sensorless vector drive.
Suited for On-Machine(TM) solutions, ArmorStart(TM) Distributed Motor Controllers feature modular, plug-and-play design. They include 4 inputs and 2 outputs, plus optional keypad for local start/stop control. Devices accept control voltages of 24 Vdc, 120 Vac, or 240 Vac. They control motors ranging from .5-5 hp at 50/60 Hz for non-reversing and reversing applications with voltage range of...
Read More »I/O System is water and corrosion proof.
ArmorPoint(TM) I/O combines benefits of plug-and-play system with IP67-rated design. It consists of adapters, I/O modules, power supplies, and backplane bus extenders. ArmorPoint includes 30 I/O modules and communication adapters for DeviceNet(TM), ControlNet(TM), EtherNet/IP(TM), and other open networks. Small increments of I/O per module are provided with 1-8 channels. I/O module types include...
Read More »Motion Control System is built on step motor technology.
ServoStep(TM) integrated motion control system features 50-pole step motor, motion controller, drive-amplifier, and encoder. NEMA 34 frame size model delivers continuous torque capability of up to 650 oz-in. and nominal speed of 2,200 rpm. Additional features include RS-485 port, closed-loop control, 14 I/O, and 4 kHz PID filter. Able to be used as stand-alone unit, product offers 4 modes of...
Read More »
Custom Fabrication & Machining Services with Over 30 Years of Experience
As a trusted manufacturer to customers across a broad range of industries, Key Gas Components is a premier provider of CNC machining and tube fabrication. Our entire organization is quality driven and customer-centric, with broad-based manufacturing capabilities that can accommodate the most challenging requirements. See our video to learn more.
Read More »
