Coatings

Potable Water Lining protects against corrosion.

Potable Water Lining protects against corrosion.

CHEMTHANE 2240PW 100% solids coating, engineered for lining potable water tank and pipe applications, can be spray-applied in one coat directly to prepared steel, iron, or concrete substrate. Solvent-free product will not transfer taste or odor into water. Suited for immersion service, aromatic polyurethane allows applicators to achieve film build of 15-70+ mil in one pass. Product also features...

Read More »

Moisture Barrier Coating suits paper/board applications.

Suited for paper packaging applications, Aqualene 4346 enables smooth, glossy, and durable surface on paper and board while delivering flexibility for scoring and folds. Product resistance and moisture barrier coating typically requires lay down weights of 1 dry pound per 1,000 ftÂ-² down to 1 dry pound per ream (3,000 ftÂ-²). Able to be dried in normal heated gas dryers, product can...

Read More »
Stainless Steel Coatings withstand washdowns and chemicals.

Stainless Steel Coatings withstand washdowns and chemicals.

Applied to metallic and non-metallic surfaces, STEEL ITÂ-® anti-rust coatings provide chip- and scratch-resistant finish for protection against UV light, weather, and solvents/detergents. Products, applied by conventional or airless spraying, brush, or roller, have 316L stainless steel leafing pigment that creates metallic barrier. USDA-approved coatings provide 2H pencil hardness and are...

Read More »

Elastomeric Spray is used in firestopping and soundproofing.

SpecSeal AS Spray provides spray-applied protection of joints and penetrations of all types. Professional-grade, latex-based acoustical coating suits construction joint applications such as floor-to-floor, floor-to-wall, wall-to-floor, wall-to-wall, and head-of-wall. Binder system is totally resistant to water and will not re-emulsify after drying. Clean-up is done via soap and water, and drying...

Read More »
Epoxy Coating protects high traffic areas.

Epoxy Coating protects high traffic areas.

Tigershield(TM) system has thick coating layers that withstand constant punishment. Self-leveling formula can be poured on and squeegeed out to smooth surface. Suited for spalled and damaged concrete, coating gets into small cracks and creates seamless floor that is impervious to dirt and bacteria. Tigershield(TM) system complies with OSHA regulations, is VOC compliant, and approved for use by...

Read More »
Zinc-Epoxy Coating System meets Class B requirements.

Zinc-Epoxy Coating System meets Class B requirements.

Coating system consists of Steel Spec(TM) epoxy primer and Zinc Clad-® II Plus inorganic zinc rich coating and meets slip coefficient performance standards for bolted connections per ASTM and AISC specifications. Zinc Clad II Plus is solvent-based, 3-component, inorganic ethyl silicate coating that dries to handle in 20 minutes at 77-°F. Corrosion-resistant Steel-Spec topcoat can be applied at...

Read More »

Inkjet Coating suits film-based label stocks.

Bright white IJ-1004 accepts all standard inkjet inks in addition to both pigmented and dye-based inks. Offered on polyester, PVC, and BOPP films, product is targeted for labeling applications utilizing desktop inkjet printers, wide format printers, and dedicated label printers. IJ-1004 water-resistant coating is suitable for printing signs, bumper stickers, product labeling, and ID cards.

Read More »
Optical Coating suits semiconductor metrology applications.

Optical Coating suits semiconductor metrology applications.

No. 1900 is a DUV broadband Al+MgF2 optical coating that provides greater than or equal to 88% reflectance at 193 nm. Applied to various glass substrates, coating is suited for applications such as ellipsometery and thin film measurement systems. It can improve throughput of spectrophotometers up to 10% reflectance per surface in DUV wavelengths.

Read More »
Reflective Coating handles temperature to 1,600-

Reflective Coating handles temperature to 1,600-

White-pigmented, water-based, glass-ceramic Quartz-Coat(TM) 850 is primarily suited for use as reflective coating on mercury vapor lamps and quartz IR heaters. Applied via airbrush-spray system or sponge brush, it is odorless, contains no VOCs, and cleans up with warm water. Solids by weight is 46.7% (17.1% by volume), and viscosity ranges from 800-1,500 cps. Curing is accomplished by setting at...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics