New Coatings Products

Frosted Glass Coating provides low temperature cure.

Water based Aqua-222, suitable as alternate to acid-etching process for surface alteration of glass containers, cures in 10 min at 350Ã-

Release Coatings leave no adhesive residue.

Available on variety of films and papers up to 82 in. wide, Non-Silicone Release Coatings are designed for applications where residue that might contaminate material or process cannot be left behind. They are offered on films from 0.25-30 mil thick and papers ranging from tissue to polypropylene-coated Kraft 44-100 lb weight. Applications include label printing, specialty tapes, and film casting.

Concrete Flooring System is resistant to thermal shock.

Ultra-Tread provides users with polyurethane modified concrete flooring system designed to withstand chemicals such as organic and inorganic acids, alkalis, and various solvents. It is offered in 3 variants: Series 243 Ultra-Tread V (vertical); Series 244 Ultra-Tread M (mortar); and Series 245 Ultra-Tread S (slurry). Available in gray and red, each impact-resistant flooring product is...

Seamless Epoxy Floor Resurfacer covers damaged floors.

POUR-N-WALK(TM) self-leveling, epoxy strength floor resurfacer has 100% solids formula that provides smooth, glossy, uniform surface that covers spalled and damaged concrete floors. Able to withstand impact and thermal shock of high traffic, product features density that makes product resistant to dirt and bacteria. Application requires user to mix, pour, and finish with notched squeegee. No...

Managing the New FGD Wastewater Regulations

A guide for managing Flue Gas Desulfurization wastewater using leading technologies.

Steel Blackener is offered in gel formulation.

Precision BrandÃ-® Tool BlackÃ-® Gel blackener blackens large, vertical, or intricate areas of steel surfaces. Dripless formula achieves uniform black cosmetic finish on most ferrous metals up to RC50. It suits prototype work, auto repair and restoration, arts and crafts, OEM finishing, decorative hardware, and general MRO toolroom applications.

Coating and Cleaner inhibit and remove graffiti.

Series 626 Dur A Pell GS inorganic sealer bonds to variety of uncoated surfaces and acts as anti-graffiti agent, minimizing penetration of paint and allowing for removal. Water-resistant properties of silicone rubber base also help minimize effects of weathering damage. Coating is transparent and dries to clear finish. Series 680 Mark A Way is a citrus cleaner that should be applied to coated...

Metallic Coatings are formulated for abrasion resistance.

Applied as slurry or sprayed onto cast or machined parts, Wear-TuffÃ-® metallic coatings feature chromium carbide and nickel base formulation. Products are sintered and fused in controlled atmosphere and provide Rc 60-65 hard surface finish. Able to withstand sandblasting, grinding, mixing, cutting, sliding, and other abrasive applications, coatings can be applied from .025-.040 in. thick on...

Acrylic Polyurethane Coating suits industrial applications.

Chemical-resistant Chemthane 3300 adds smooth, glossy finish to steel, iron, galvanizing, aged fiberglass, concrete, masonry, and wood substrates. Formulated in 1:3 mix ratio with pigmented acrylic enamel and polyisocyanate hardener, low-VOC coating can be applied by brush, roller, or single component airless pump. It is offered in various colors and exhibits resistance to acids, alkalis,...

Stainless Steel Coatings offer chip and scratch resistance.

STEEL IT-® Anti-Rust Coatings features 316 SS leafing pigment that creates metallic barrier to prevent corrosive attack of base metal. Capable of withstanding dropped tools that would damage conventional paints, coatings can be applied by spraying, brush, or roller. USDA-approved products withstand chemicals, solvents, salt spray, UV light, detergents, and high-pressure washing. Exhibiting 2H...

Speed Reducers feature washdown coating.

Suited for speed reducers, Stainless Bost-Kleen(TM) utilizes Bisphenol-F type epoxy, which offers chemical, pressure, and thermal resistance to prevent wear and cracking caused by caustic chemicals and high-pressure washdowns as well as scratches that may occur from contact during installation and operation. Coating is USDA and FDA accepted, BISCC certified, and available on all speed reducers.

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.