New Coatings Products

Epoxy Coating protects floors in industrial facilities.

Applied by brush or roller, FLOOR-NU DTO (Direct to Oil) bonds to steel and concrete substrates contaminated with petroleum oil, grease, or vegetable oil. Dual-component primer, with accompanying epoxy top coat, can be applied over marginally prepared rusted steel and existing coatings, resulting in seamless finish. Product does not release harmful components and, once installed, is USDA...

Refractory Material suits furnace construction and repair.

Spray-On Met-Silcast(TM) nanoparticulate refractory consists of pumpable, colloidal, silica-bonded, monolithic material that can be applied in hours or days rather than weeks or months. Product provides continuous, seamless surface with acid resistance for use in petrochemical and copper industries. Met-Silcast(TM) can be pumped at rates up to 15 tons per hour and is available in quantities of 2...

Floor Coating protects surface from scratches.

WoodStarÃ-® Satin Wood Floor Finish consists of internally cross-linked, 1-component coating that provides stable, low-gloss film for slip resistance without burnishing. Water-borne, low-odor material is suited for protection of all commercial wood floors.

Adhesive/Coating System insulates induction heating coils.

Pyro-Putty(TM) 677 single-part, water-dispersed, alumina-silica based adhesive and coating system is suited for electrical insulation and bonding applications to 2,400-°F. Thixotropic product is supplied in paste consistency with viscosity of 43,000 cps and specific gravity of 2.17 g/cc. After application, it dries at room temperature in 1-4 hr and cures in 2 hr at 200-°F. Material produces...

Key Considerations When Choosing the Right Medical Device Development Experts: From Concept to Market

This eBook covers various factors to consider when selecting a medical device development partner to ensure proper guidance from concept to launch.

Epoxy Coating is applied in one coat.

Enviroline 380 ultra-high solids, thick-film epoxy coating exhibits chemical- and solvent-resistance in addition to abrasion- and impact-resistance. It does not require preheating prior to application and is suited for tank and pipe owners as well as contractors.

Coatings are offered in low-temperature cure versions.

Usable at temperatures down to 32Ã-ºF, Enviroline 375LT high-solids epoxy will cure in 5 days. Enviroline 376F-30LT and Enviroline 376F-60LT are 100% solid epoxy coatings that cure in 7 days at 20Ã-ºF or one day at 45Ã-ºF. Each epoxy is suited for use as lining for storage tanks, process tanks, pipelines, and concrete containment areas in petroleum, chemical processing, and wastewater...

Concrete/Masonry Sealer offers one-step application.

Water-based All-ShieldÃ-® Concrete & Masonry Sealer stops water penetration and damage in concrete, masonry, brick, block, stone, tile, stucco, and adobe. Clear, non-yellowing, VOC compliant formula allows substrate to breathe and water vapor to escape, providing protection for up to 8 years. Mold and fungus resistant, it also protects against freeze/thaw cycles, efflorescence, and alkali....

Ceramic-Based Coating seals thermal spray coatings.

Ceramacoat(TM) 503-VFG-C high-temperature sealant fills micro-porosity in corrosion protective, thermal spray coatings. It is formulated as single part, water-dispersible, alumina-filled system. Inert, chemically-resistant, inorganic material will not outgas or decompose in high-temperature, corrosive applications up to 3,200Ã-

Glass Coating offers alternative to acid etching.

Available in frosted patterns, water-based Aqua-444UV bonds chemically to glass, eliminating need for high-temperature baking. It can be used to alter one or both surfaces of glass to scatter or diffuse reflected portion of visible light. Low VOC formulation is based on lead-free and cadmium-free glass. It will not yellow or fade under direct sunlight and offers chemical, water, and abrasion...

Glass Coating comes in frosted patterns.

Water-based Aqua-333UV bonds chemically to glass, eliminating need for high-temperature baking. It will not yellow or fade under direct sunlight, and offers chemical, water, and abrasion resistance as well as UV blocking properties. Low VOC formulation is based on lead-free and cadmium-free glass. It is suited for decoration of automotive windshields, glass-topped stoves and oven doors, as well...

Does Your Parking Lot Make a Good First Impression?

To enhance its appearance by removing oil stains, Terminator-HSD uses micro bacteria to remove the stain without harsh chemicals, acids, or detergents. Check out the video to learn more.