Coatings

Fire Retardant Coating protects fragile substrates.

Fire Retardant Coating protects fragile substrates.

EURO-SEAL 7000 polyurethane encapsulant, suited for use on carved architectural EPS and polyurethane foam elements, provides protection from thermal expansion and UV degradation and strengthens mechanical impact resistance. Able to dry to touch within 10 sec, 2-component, spray-applied polyurethane coating forms hard, chemical-, moisture-, and fire-retardant encapsulation. It enables fabricators...

Read More »
Epoxy Coating provides corrosion protection to 300-

Epoxy Coating provides corrosion protection to 300-

Corr-Paint(TM) CP2070 high-temperature, epoxy-novolac paint is a 2-part, gray-pigmented, 100% solids system used to protect steel components and structures. It is resistant to wide range of chemicals, and provides thermal shock, salt spray, and UV resistance. Mixed viscosity is 800-1000 cp. Applied by spray equipment, brush, or roller, coating dries and cures fully at room temperature in 24 hr....

Read More »
Refractory Coating withstands temperatures to 2,300-

Refractory Coating withstands temperatures to 2,300-

Pyro-Paint(TM) 634-AS alumina-silica-filled, fiber-reinforced, ceramic coating bonds, coats, and seals graphite and refractory materials used in molten metal fluid handling components. It also coats and insulates graphite impellers, preventing oxidation and corrosion of graphite at melt line. With 400-700 cps viscosity range, it is resistant to wetting by non-ferrous molten metals,...

Read More »
Adhesive and Coating withstands temperatures to 2,400-

Adhesive and Coating withstands temperatures to 2,400-

Ceramacoat(TM) 512N high-temperature adhesive and ceramic coating system is used in assembly of ceramic, metal, and plastic electrical components and as coating of high temperature structures requiring corrosion protection. Single part, water-based, silica-filled system offers volume resistivity of 109 ohm-cm and dielectric strength of 250 V/mil at room temperature. Odorless product contains no...

Read More »
Underfill Material is formulated for flip chip packaging.

Underfill Material is formulated for flip chip packaging.

HysolÂ-® FP4580 low stress liquid epoxy prevents cracking and delamination of chip's inner layers. It works on copper/low k flip chip laminate packages up to 50 x 50 mm with over 4,000 solder bumps. When fully cured, product forms rigid, low warp seal that dissipates stress on solder joints and extends thermal cycling performance. HysolÂ-® FP4580 underfills devices with gaps as small as...

Read More »
Reflective Aerosol Coating improves low-light visibility.

Reflective Aerosol Coating improves low-light visibility.

REFLECT-A-LITE(TM) paint consists of clear, reflective, aerosol coating that can be applied to items without obscuring original or daylight color. It directly reflects light from flashlights or headlights to increase visibility in the dark, under emergency lighting conditions, or in areas with low ambient light. Product may be applied to rough and complex shapes not suited for reflective films...

Read More »
Water-Borne Coating removes with alkaline cleaners.

Water-Borne Coating removes with alkaline cleaners.

Using advanced green chemistry, VpCIÂ-®-391 coating provides medium- to long-term outdoor protection and exhibits salt, humidity, and UV resistance. Environmentally friendly coating consists of non-toxic organic inhibitors formulated with water-based acrylic polymer. It provides low VOC that dries to tack-free coating in 30-60 min. Clear coating protects all types of steel and aluminum for up...

Read More »
Epoxy Floor Resurfacer creates chemically resistant surface.

Epoxy Floor Resurfacer creates chemically resistant surface.

Non-shrink TREFLITE(TM) bonds to concrete, wood, steel, aluminum, glass, and ceramic surfaces to provide nearly indestructible finish to old and new floors. Resistant to thermal and physical shock, abrasions, acids, alkalis, and solvents, product also resists steel-wheel traffic with compressive strength of 14,000 psi. Resurfacer is 100% non-skid, even when wet, and no special tools or skills are...

Read More »
Polyurethane Coatings provide waterproof surface.

Polyurethane Coatings provide waterproof surface.

Tigerdeck(TM) flexible, watertight, polyurethane coating systems protect high traffic concrete, wood, and metal substrates that require chemical resistance. Since multi-layer systems are flexible, they allow substrate to move with changes in temperature and humidity without cracking or popping off. Elastomeric, seamless membrane prevents moisture attack that causes costly damage to any slab....

Read More »

All Topics