New Adhesives Products

UV Curing Adhesive is chemical-resistant.

AngstromBondÃ-® AB9031 epoxy based system contains optical silica filler. Creamy paste can be dispensed through syringes or automated cartridges. It bonds to metals, ceramic, silicon, plastics, and glass. Product passes specifications including 1,000 hours in 85/85 environment. Product is suitable for optical bonding and sealing applications where alignment must be maintained during thermal...

Sprayable Adhesive is VOC compliant.

Scotch-Grip(TM) Industrial Adhesive 4491 features rubber/resin blend that resists weathering, water, fuel, oil, and plasticizers. Solvent-based product contains no Hazardous Air Pollutants and meets 250 grams/liter Volatile Organic Compound limit. Product bonds wood, metal, vinyl, foam, leather, fabrics, rubbers, FRP, acrylic, nylon, and many other plastics.

Liquid Adhesive cleans up with water.

BONDMASTERÃ-® 40-0857 polyvinyl, emulsion adhesive exhibits the following surface burning characteristics: flame spread, 10; fuel contributed, 0; and smoke density, 0. Adhesive may be applied using direct roll coater or spraying to facing and contains ingredient that kills mildew for protection against fungus, bacteria, and mold. It laminates foil, vinyl, and composite facings to glass...

Adhesive offers working time of 90 min at room temperature.

PlexusÃ-® MA557 2-part methacrylate adhesive is designed for structural bonding of composites, thermoplastics, and thermosets. Mixed as dispensed at 10:1 ratio, adhesive cures to tensile strength of 2200-2500 psi, providing fatigue endurance and impact resistance. It resists hydrocarbons, salt solutions, and acids and bases in solution (3-10 pH). MA557 eliminates problems associated with...

Maximum Grip and Comfort With Standard and Custom Knobs

Learn more about Innovative Components' wide variety of knobs available or explore our customization options for your specific applications and needs in this compressive product guide.

Adhesives for use in permanent magnet motors.

Line includes structural acrylics, 1- and 2-part epoxies, UV curable, cyanoacrylates, and anaerobic adhesives. Permabond E04 (2-part epoxy) and 465 (UV curable) are both used for wire tang reinforcements. E32 (2-part epoxy), ESP310 (1-part, heat cured epoxy), 681 (2-part acrylic), 581 (1-part acrylic used with 534 activator), 671 (2-part acrylic), and 533 (1-part acrylic used with 534 activator)...

Adhesive Systems seal and cover molecular devices.

Low fluorescence adhesives provide sealing and cover constructions for microfluidic devices and bioarrays. Adhesives are dimensionally stable and will not flow into microfluidic channels. They will adhere to base plate without creating voids or gaps that may allow migration of components from one channel to adjacent channel, and they exhibit good stability to moisture and temperature change....

Adhesives work in electronic labeling applications.

FassonÃ-® S8010 and S8015 clear acrylic adhesives have good initial tack, high shear, and adhere to any substrate used in electronics devices. S8015 adheres to difficult surfaces, like powder coat paint. Adhesives are available on range of film facestock materials, with or without topcoats, and work with various print treatments, such as flexographic and letterpress printing, and thermal...

Polyurethane Adhesive has fluorescent trace for inspection.

TRA-BOND 724-20 pre-mixed and frozen adhesive provides strong, resilient bonds to variety of substrates including aluminum, solder, nylon, mylar, and steel. Adhesive strength is maintained in cryogenic conditions, and it provides bond line control for critical alignment applications. Polyurethane exhibits good dielectric properties. Several cure options are available, including room temperature.

Adhesive is removed with acetone or ketone solvents.

Single component, flexible, UV curable adhesive UV14-3 cures at room temperature in seconds to 1 min. It is not oxygen inhibited and does not require inert atmosphere. It requires no mixing, and develops high bond strengths with metals, ceramics, glass, paper, plastics, and elastomers. UV14-3 has operating temperature range of -60 to +250Ã-

Epoxy Adhesive cures under UV light.

Clear TRA-COAT WCC2B UV curable one-part adhesive can be used for optical fiber, glass, and general purpose applications. Adhesive is clear, medium viscosity, and cures with exposure to UV light at 100 fpm under 300 W/in. bulb. Easy to apply, it creates strong bonds to clear plastics and glass.

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.