New Actuators Products

Linear Actuators provide quiet operation.

MAGDRIVE Actuators deliver push force of 8,000 N, speeds from 8-15 mm, and stroke from 100-700 mm. With safety rating of 1.5 for stroke length up to 400 mm, units are suited for medical applications. They include safety nut and limit switches, mechanical end stops on both directions, and IP21 protection. Anodized aluminum housing measures 62 x 62 mm and can be color-customized. Options include...

Electric Linear Actuators have die-cast aluminum powerheads.

HD-Series acme screw actuators, designed to handle moving loads up to 2,500 lb and static loads to 5,000 lb, feature standard stroke lengths from 4-48 in. and are offered with 17:1, 25:1, and 55:1 gear ratios. With dynamic load capacities to 3,000 lb and static load capacities to 5,000 lb, heavy-duty A-Series feature round 2.25 in. or square 2.5 in. tubing and .75-6 acme screw. Gear ratios are...

Actuator features clean, quiet operation.

Using Type SRS LM Guide for its base, Type VLA Actuator incorporates Caged Technology, QZ Lubricator, and electro-mechanical components. It is offered in slide and cylinder types and is compatible with ac or dc servomotor controller packages. Able to serve as replacement for pneumatic cylinders in various applications, product is available with ball screw leads from 6-12 mm and rated speeds from...

Linear Actuator suits rapid motion applications.

Size 8 captive linear actuator is designed with integral anti-rotation mechanism for applications where external anti-rotation methods would not work. It features engineering thermoplastics in rotor drive nut and stainless steel Acme lead screw. With resolutions ranging from 0.0015-0.04 mm per step, thrusts up to 4.5 kg, and 21 x 21 mm frame size, applications include medical equipment, x-y...

The Benefits of Pre-Engineered Systems

Learn more about our pre-engineered thermal fluid system options.

Scotch Yoke Actuators offer torques up to 600,000 lb-in.

Capable of operating ball, butterfly, and plug valves, dampers, or louvers, TRIAC THD Series features symmetrical yoke that delivers max torque at both ends of 90Ã-

Linear Actuators include 5-phase hybrid stepping motor.

Available with and without anti-rotation guide mechanism, miniature Series DRL comes in 1.1, 1.65, and 2.36 in. sq frame sizes. Actuators use rolled ball screw or ground ball screw and produce 6.7, 22, or 66 lb of force over 1.18, 1.57, or 1.97 in. stroke. Repetitive positioning accuracy is Ã-

Direct Drive Linear Actuator offers dual-mode operation.

Able to operate in position and force modes, I-Force(TM) Series uses non-commutated, linear, coreless, brushless servomotors. Precision positioning is achievable due to 0.05-10 micron, contact-less linear position feedback and built-in linear guide system. Actuators can achieve accelerations above 10 G and cycle rates above 20 Hz. Supplied with digital I-Drive(TM) servo amps, products have 5-50...

Linear Actuators satisfy medium to high duty actuation.

Rolaram Linear Actuators withstand 5-400 kN loads at speeds of up to 7000 mm/min as standard. Three types of lead screws can be used: machine, ball, and roller. Roller screw meets high duty aspect while keeping unit compact. Unit provides high dynamic load carrying capacity along with almost no axial backlash or wear. Electric motor can be mounted in line, at right angles, or parallel to ram...

Pneumatic Rotary Actuators feature flange stop design.

Series AGR is available in 5 bore sizes of .5, .75, 1.0, 1.25, and 1.625 in. with manifold, mid stop, and sensor options. All are rack-and-pinion units with dowel pin embedded in body and 2 internal hard stops in output flange that eliminate pinion breakage. Torque output ranges from 7-310 lb-in. at 100 psi. Units operate with zero backlash at end of rotations. Due to constant torque output and...

Linear Actuator measures 0.8 in. square.

Size 8 hybrid external linear actuator replaces motor, coupling, lead screw, and nut. Shaft to lead screw couplers are not needed and rotating acme stainless steel lead screw is incorporated into motor's rotor. Available in resolutions from 0.0015-0.04 mm per full step, actuator delivers up to 10 lb thrust and has 4 in. of visible lead screw. Lead screw length, coil termination, and external nut...

ISO-Certified J&D Tube Benders Delivers Rapid Tubeline Fabrication Services

J&D Tube Benders' laser cutting and machining services provide accurate and complex features on tubes of all shapes and sizes. Check out the video to learn more!