Switching Power Supply withstands harsh environments.
RHINO(TM) PSM series switching power supplies are available in 12 or 24 Vdc models with power ratings from 78-600 W and up to 25 A output current. Two diagnostic outputs monitor low output voltage levels, allowing for remote notification to a PLC, SCADA, or MMS. RHINO PSM power supplies also include multiple output terminals to enable wiring in parallel load configurations, dual status indicator...
Read More »Power Supply suits welding applications to 500 W.
Connected directly to 2000 Series hand-held welding devices, 2000LP Ultrasonic System is configurable to run in automation and features digital LED read out and process controls. Visual, audible, and logic alarms provide continuous monitoring, while closed loop amplitude control ensures constant power and consistency in welding cycle. Available in 20, 30, and 40 kHz frequencies, product offers 5...
Read More »Switching Power Supplies have 25-150 W output range.
NextGen Series enclosed AC/DC switching power supplies accept universal input from 85-265 Vac, and 90 models are available that provide Single/Dual/Triple/Quad outputs from 3.3-48 Vdc. Dual outputs offer shared common ground configuration or separate common returns for each output, depending on model. Featuring SMT construction and 105Ã-
Read More »Power Supplies are ruggedized for industrial applications.
Packaged in UL-approved fiberglass housing, PSA Series encapsulated, PCB-mount switching ac/dc power supplies feature regulated outputs, continuous short circuit protection, and operating range from -25 to +71Ã-
Read More »Peristaltic Pump Vs. i-FILL® Technology
Intellitech's advanced i-FILL® pumps are used by companies working in some of the world's most demanding sectors, delivering innovative, highly accurate and repeatable results, ensuring ultimate reliability and ease of use for all of our clients.
Read More »AC/DC Power Supply fits in standard 6U VME rack.
Model 56SQ1 provides 430 W of output power at full load with operating temperature of -55 to +85Ã-
Read More »Welding Power Source features lightweight, portable design.
Weighing 40 lb, CST(TM) 280 Stick/TIG Welding Power Source provides output of 280 A/31 V at 35% duty cycle or 250 A/30 V at 60% duty cycle. Users can select between high and low voltage inputs to accommodate domestic and international requirements. If the arc start requires additional output amperage, Adaptive Hot Start(TM) automatically provides it, preventing electrode from sticking and...
Read More »Welding Power Supply has spool gun ready capabilities.
Power MIGÃ-® 255C features Diamond Core Technology(TM) for minimal spatter. Spool gun ready capabilities include built-in electronics to drive PrinceÃ-® XL or MagnumÃ-® SG spool gun for aluminum welding and second gas solenoid to facilitate spool gun connection. Offering continuous control over amperage range of 30-300 A, rated output is 250 A @ 40% duty cycle. Unit has 115 V...
Read More »Distributed Power Systems have high-density design.
Featuring active power factor correction, ac-dc distributed bulk power front-ends in DS Series accept ac input from 90-264 Vac and provide +12 Vdc main output and +3.3 Vdc standby output. Power supplies, available with power ratings of 450 and 550 W, have 1U x 2U profile and high-density (greater than 10 W/in.Ã-³) design. Internally fan-cooled units feature full current-sharing capabilities,...
Read More »AC/DC Front-End Power Supply produces 13 W/in.-³.
Suited for equipment with distributed power architecture, DPS2000 adheres to SSI guidelines. Rated at 2,000 W, 48 V unit features active current sharing, hot-swap capabilities, N+1 redundancy, and I2C interface. Power-factor corrected unit meets EMI Class B regulations, measures 12.80 x 2.74 x 4.86 in., and is upgradeable via flash memory. With full load efficiency of 87%, it delivers 1,000 W at...
Read More »Orbital Welding Power Supply uses inverter technology.
Compact, water-cooled ORBIMAT 165C can be used to control welding heads that are capable of cutting 3-275 mm OD tubes, pipes, and fittings. Full package, consisting of controller, power supply, and cooling unit, weighs 24 kg with full coolant level. Inverter technology throughout machine enables it to work with any input voltage from 80-260 Vdc, while Compact Flash port on front panel allows...
Read More »Industry Leading OEM with over 65 Years of Experience
Blonder Tongue Laboratories provides ISO 9001:2015 certified electronic contract manufacturing services at our on-site lab. We specialize in video distribution, fiber optics, and communications but have a variety of services available to bring your products to market. See our video to learn more.
Read More »