New PES2200 Series Power Supplies from Bel Comes with Totem-Pole Bridgeless PFC
Offers digital control for servers, storage and networking equipment and other high-availability applications. Provides main output of 12 VDC for powering intermediate bus architectures (IBA) in data center and telecom central office equipment. Measuring 80 x 40 x 195 mm and has power density of 59 W/in3 that provides 12 V output plus an always-on 12 V standby output at 3.5 A.
Read More »
New External PSUs from XP Power Meet UL/EN/IEC62368 and IEC60950 Standards
Available in two models ALM150 and ALM200 which offers power levels up to 150W and 200W respectively. Offers five single output versions with output voltages of 12.0V, 15.0V, 19.0V, 24.0V and 48.0V and input voltage range from 80 to 264VAC. Housed in IP32 vent-free plastic case and can operate at temperatures between 0°C and +60°C.
Read More »
New LED Power Supplies Compatible with Phase Dimming and 0-10V Dimming Systems
Operate with input voltage of 120-277VAC. Feature an integrated wiring compartment for streamlined installation and are available in multi-output versions in both 12 and 24VDC. Ideal for dimming power solution for many commercial lighting applications including audio visual, architectural and hospitality.
Read More »
New ACC600 and MCC600 Series Open Frame Power Supplies are Available in Single Output Voltages
ACC600 Series features universal AC input range of 85-264 VAC and offers up to 600 W of output power with convection cooling, in a compact footprint (5.0 x 8.5 x 1.61" (127.0 x 215.9 x 40.9 mm)). Designed and approved to EN/IEC 60601-1 medical standards, MCC600 series provides 2 x MOPP isolation for Class I & Class II applications. ACC series are ideal for industrial whereas MCC series are ideal...
Read More »
Ergonomics Is Good Economics
While you don't need an MD to know that ergonomic designs are good for physical health, you probably didn't realize that these designs can actually be good for your economic health too.
Read More »
Bear Power Supplies Wins Contract to Design Custom Ultra-Low-Noise, 500w Medical AC/DC Converter for Hospital Use
Bear Power Supplies has won a new contract to design a 500 Watt medical power supply for a Fortune 500 medical equipment manufacturer. The custom AC/DC converter will have a universal input for worldwide use and feature four different low-leakage-current outputs, including CF-rated outputs. “The leakage current specification for this design is an order of magnitude lower than a typical power...
Read More »
New 1U AC/DC Programmable Power Supply Series Offers Five Embedded Front Panel Setup Menus
Output voltage ranging from 10V-170A to 600V-2.8A and has power density 1.7kW in 1U height. Can operate in Constant-Current (CC), Constant-Voltage (CV) as well as Constant-Power (CP) limit and have conversion efficiencies up to 90%. Ideal for automotive, aerospace, semiconductor, industrial and renewable/alternative energy markets.
Read More »
New SMI6B Series Features Interchangeable Ac Blades
Features an ultra-compact package measuring 1.85 x 1.36 x 1.04 in (47 x 34.5 x 26.5 mm). Includes standard dc output connector options, including USB type C and micro B. Ideal for consumer, Industrial and mobile electronics applications.
Read More »
Tumbler Technologies Now Offers New TSM500 Power Supply That Can Deliver 508.6W of Continuous Output Power
Equipped with remote on/off capabilities and 5V standby and fan power. Offers single output of 12V, 15V, 19V, 24V, 30V, 36V or 48V at efficiencies up to 92% depending upon the model. Can Withstand Voltages of 4,000 VAC from input to output and 2,000 VAC from input to ground.
Read More »
New AC/DC Power Supplies Available in 2.5 A and 7.5 A Options
UL Listed and Class I, Division 2 approved power supplies include advanced functionality in compact form factor. Features adjustable signal output which enables LED and remote digital monitoring to detect critical operating states before faults occur. Designed for critical applications that may have space limitations.
Read More »
TDK Introduces CUS100ME Series AC-DC Power Supplies for B and BF Rated Medical Equipment
Available in 50.8 x 101.6mm open frame version footprint with height of 31.5mm. Offers 12V, 15V, 18V, 24V, 28V, 36V and 48V outputs with an input of 85 to 264Vacs range. Features an isolation of 4kVac (input to output), 4kVac (input to ground) and 1.5kVac (output to ground) and maximum touch current of 100µA.
Read More »
Do You Have Unique Lifting Needs?
EZRig Cranes offers lifting solutions that are engineered for robust performance, providing the ultimate in portability. Designed for real-world lifting needs, our products are small and light with options and features that make them ideal for a broad range of applications. See our video to learn how an EZRig Crane can simplify your lifting requirements.
Read More »
