RWS-B Series AC-DC Power Supplies feature double sided board coating.
Available in RWS1000B and RWS1500B models, AC-DC Power Supplies are available in power of 1000W and 1500W with 12, 15, 24, 36 and 48V outputs. Operated from -20 to +50°C temperature range, units are suitable for industrial, LED signage equipment, test and measurement applications. Offering reverse airflow, remote on/off, DC Good/Fan fail signal options, products meet UL/CSA/EN 60950-1 standards....
Read More »
CSS65A Series AC-DC Power Supplies meet IEC 61000-3-2 and IEC 61000-4 standards.
Available in 5, 12, 15, 19, 24, 28, 48 and 54V outputs, CSS65A Series AC-DC Power Supplies come in 50.4 x 101.6 x 27.5 mm size. Suitable for medical, clinical, test and measurement, process control, broadcast and communications applications, units come with power consumption of <75mW. Featuring 4kVac input to output and 1.5kVac output to ground isolation, products can operate in ambient...
Read More »
Encapsulated AC-DC Power Supplies provide MTBF of 300,000 hrs.
Operating in -25 to +50°C temperature range with 85 to 264 Vac universal input voltage, PSK Series AC-DC Power Supplies are available in PSK-6B, PSK-10B, PSK-15B and PSK-20B series models. Encapsulated in 2 x 1 x 0.659 in. board mount package, units meet UL/cUL and TUV 60950-1 safety standards. Delivering 6, 10, 15, and 20 W of output continuous power and 5, 9, 12, 15, 24, and 48 Vdc output...
Read More »
PMP65 Series AC/DC Power Supply meets EN55011 and FCC standards.
Designed for medical applications, PMP65 Series AC/DC Power Supply offers 12VDC, 15VDC, 18VDC, 19VDC, 20VDC and 24VDC output voltages. Featuring low safety ground leakage current, overvoltage and over-temperature protection, unit provides MTBF of 150k hrs. Operated in 0‐60°C temperature range with 85‐265VAC input voltage range, PMP65 is enclosed in 94V‐0 rated polycarbonate case.
Read More »
There's More to Plating than You Zinc!
To find out more about the seven demands you should make of your zinc plater, download now.
Read More »
AC-DC Power Supplies offer MTBF of 300,000 hours.
Available in VOF-6B, VOF-10B, VOF-15B and VOF-20B series models, AC-DC Power Supplies are housed in 48.6 x 23.3 x 16.2 mm board mount package. Featuring pin-outs, 4 kVac isolation and less than 100 mW of no-load power consumption, units are operated in -25 to +50°C temperature range with universal input voltage range of 85 to 264 Vac. Delivering 5, 9, 12, 15, 24, and 48 Vdc single output...
Read More »
PQC Series Power Supplies feature droop current share characteristics.
Available in 12V, 24V, 36V, and 48V versions, PQC Series Power Supplies feature less than 500mW standby power consumption. Housed in 3 x 5 in. 1U footprint, units are operated in 0°C to 50°C and up to 70°C (with derating) temperature range with 90Vac to 264Vac voltage range. Rated to 250 watts of output power, product comes with 4000 Vac input to output isolation and is suitable for ultrasound...
Read More »
PPWAM280 Series AC/DC Power Supplies are RoHS compliant and BF rated.
Operated on 90-264VAC input voltage range with 0-70°C temperature range, PPWAM280 Series Open Frame Medical AC/DC Power Supplies offer 12V, 24V, 28V, 48V and 54V output options. With earth leakage current of <100uA at 264 VAC, short circuit, overload and overvoltage protection, product features 5000m altitude operation and MTBF of greater than 200,000 hours at 25°C.
Read More »
PHR Series AC-DC Power Supplies feature opto-less design.
Available with 120W, 150W, 200W or 250W output power levels, PHR Series AC-DC Power Supplies are designed to provide 30 years of operating life. Featuring low component count and full electronic protection, units convert universal ac-input voltage of 95V to 264Vac to 12V, 24V, 48V or 125Vdc for 120W, 150W and 200W units and to 24V, 48 V. Operating in -20°C to +70°C temperature range, units...
Read More »
TET3000-12-069RA Power Supply is equipped with active ORing device.
Used for powering intermediate bus architectures in servers, routers and network switches, TET3000-12-069RA Power Supply offers I2C/PMBus™ protocol communication. Featuring 32 W/in^3 power density and more than 96% efficiency at 50% load, unit is operated with 180-410 VDC input voltage. Meeting RoHS, CE and EN 60950-1 standards, TET3000 is housed in 69 x 40.5 x 555 mm package and comes with...
Read More »
PEAD72 Series Desktop Power Supply features LED on indicator.
Available with single output models of 12V, 15V, 18V, 19V, 24V, 36V or 48V, PEAD72 Series Desktop Power Supply features overload and short circuit protection. With universal input of 90-264VAC, unit is operated in 0 to +40°C temperature at less than 5000m operating altitude. Available with C14, C6, C8 and C18 options of AC input receptacles with DC output plug of 2.5 mm x 5.5 mm barrel...
Read More »
Custom Fabrication & Machining Services with Over 30 Years of Experience
As a trusted manufacturer to customers across a broad range of industries, Key Gas Components is a premier provider of CNC machining and tube fabrication. Our entire organization is quality driven and customer-centric, with broad-based manufacturing capabilities that can accommodate the most challenging requirements. See our video to learn more.
Read More »
