Open Frame Power Supplies suit 1U high applications.
Featuring Universal AC input with active power factor correction for EN61000-3-2 compliance, ARFS-150 series 150 W switching power supplies come in standard 3 x 5 in. footprint and feature low profile of 1.08 in. They have 12/24 Vdc Ã-
Read More »
AC/DC Power Supplies deliver power density of 6.6 W/cu in.
Measuring just 2.64 x 1.57 x 0.73 in., ECP20 Series 20 W AC/DC PCB mounted power supplies offers single output units providing 3.3, 5, 9, 12, 24, 30 or 48 Vdc and in dual output models providing Ã-
Read More »AC-DC Power Adapter suits portable and desktop applications.
With 90-264 Vac universal input, 24 Watt Model AD2412N3L produces fully regulated 12 V output. Unit features 3-pin IEC320 AC input receptacle with safety-ground leakage current maximum of 250 Ã-µA, and delivers DC output via fixed cable fitted with 2.5 mm barrel plug. Offering 82% efficiency, external adapter includes switching regulators for switched-mode operation, built-in EMI filter, and...
Read More »
Jobsite Welder integrates air compressor and generator.
Designed to meet jobsite reliability standards, multifunctional TrailblazerÃ-® 302 Air Pak(TM) is gasoline engine-driven welder, generator, and air compressor. This self-contained power source welds at up to 350 A and provides 13,000 W of Accu-Rated(TM) generator power as well as 26 cfm at 100% duty cycle. Rotary screw air compressor delivers 70-160 psi of air, with no storage tank required,...
Read More »
Seal Stuff In, Seal Stuff Out
One of the best ways to make sure that your machinery stays up and running in the face of adversity is to make sure that it's properly sealed. Of course, it's not always easy to determine whether the integrity of your seals are up to par. How can you tell when you have a problem?
Read More »
AC/DC Power Supply Modules suit wide range of applications.
Available in 5, 10, 15, 20, and 25 W power ratings, LH series AC/DC power supply modules accept universal 85-264 Vac input and can also accept DC input of 120-370 Vdc. They feature low leakage current, input-to-output isolation of 3,000 Vac, operating temperature range of -25 to +71Ã-
Read More »DIN Rail AC/DC Power Supply offers up to 92% efficiency.
Ranging in size from 1.26 x 4.0 x 4.88 in. to 2.36 x 4.60 x 4.88 in., DRS series is comprised of 80, 120, and 240 W single-output models with efficiency levels from 89-92%. Each accommodates universal input range of 85-264 Vac without any input range selectors and accommodate peak load 150% of nominal rating for up to 4 sec max. Series provides output voltage variants of 12, 24, or 48 Vdc, which...
Read More »
Wall-Mount AC-DC Adapters suit medical, ITE applications.
Capable of delivering 12 V @ 12 W total power, DA12-M series single-output power adapters feature universal 90-264 Vac inputs in 4 AC plug configurations (US, UK, EU, AU). All are engineered to meet Level V Efficiency standards and fully certified by Energy Star 2.0 as well as CeC. With form factor that enables use of multiple adapters in dual wall outlet configurations, products offers built-in...
Read More »AC-DC Power Supplies are medically approved.
With up to 88% efficiency, PMK/PMMK family of high-density, switching AC-DC power supplies are capable of delivering 450 W with active power factor correction (PFC). They provide 5, 12, 24, 36, and 48 V outputs, and come in 2 styles; one with enclosed fan and second version supplied with U-Channel in 5 x 8 x 1.57 in. enclosure. DIN rail-mountable units also feature single line current share,...
Read More »
Power Supply offers universal 90-264 Vac input range.
Designed for worldwide use, Model XCSD50C class 2 single-phase 2.5 A, 24 Vdc output power supply has efficiency rating of 90%. It features built-in short circuit, overload, over temperature, and over voltage protection. Unit dissipates very little heat and works well in small low profile enclosures.
Read More »
PFC AC/DC Front-End Power Supply delivers 2,800 W output.
Supplied in 11.5 x 5.5 x 1.6 in. enclosure with internal cooling fans, RoHS-compliant D1U-H-2800-52-Hx has -52 V main output and +12 V standby output. N+1 redundancy-capable unit, suitable for hot-docking, has 27.7 W/in.Ã-³ power density and 91.6% (full load) or 92.0% (2 kW load) efficiency. Used for mission-critical 48 V distributed power architecture systems in data communications...
Read More »
Precision Machined Parts for High Tech Applications
For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.
Read More »
