TDK Corporation Launches Motion, Sound and Ultrasonic Sensor Solutions, Embedded Motor Control and Magnetic Sensors, Power Supply Solutions as well as Passive Components At Embedded World 2019
HVC 4420F embedded motor control and magnetic sensors by TDK-Micronas enables direct drive of small brush-type, stepper or brushless electric motors in smart actuators. Meets increased functional and diagnostic demands with flash memory extended to 64 KB and SRAM to 4 KB. Offers the storage capacity and processing capability to execute actions which are unique in the environment of smart...
Read More »
New DRF960-24-1 DIN Rail Power Supply Withstands Surges Up to 300 Vac for 5 Seconds
Supplies a peak load of 1440 W for up to 4 seconds to power capacitive and inductive loads. Offered in 110 x 123.4 x 139 mm (W x H x D) dimensions with 24 V output, adjustable from 24 V to 28 V. Features remote on/off and a 30 V 1A rated DC relay contact and suitable for applications such as industrial process control, factory automation and test and measurement equipment.
Read More »
Bel Power Announces SPSTET4 System for Applications where AC-DC Conversion from Single-Phase AC Mains Power to 54.5Vdc is Required
Designed for secure remote monitoring and is compliant to EMC and safety standards and carries the CE mark. High efficiency with dynamic response to load/input changes and low output voltage noise. Includes a 6-slot shelf, PDU and shelf controller for full remote control and monitoring of the system via SNMPv1/2c/3 through a 10/100 MB base ethernet port.
Read More »
New DRL100-24-1/C2 Power Supply Housed in a Rugged Plastic Enclosure with Overall Dimensions of 72 x 91 x 55.6 mm (W x H x D)
Class II construction with double insulation for operation without an earth ground connection. Operating ambient temperature is -20°C to +71°C, -25°C cold start, derating linearly above 40°C to 40% load at 71°C. Off-load power consumption is less than 0.5W and the full load efficiency is 90% with a 230Vac input.
Read More »
Responsible Spill Remediation in the Food & Beverage Industry
There are two major areas in which food & beverage product handling will take place: processing and distribution. As with all product handling scenarios, spills are an inevitable occurrence within both of these spaces.
Read More »
New PSK S3 and PSK S5B Series Power Supplies Offer Single Output Voltages of 3.3, 5, 9, 12, 15 and 24 Vdc
Low power, encapsulated ac-dc power supplies are housed in compact packages measuring 1.46 x 0.97 x 0.71 inches (37 x 24.5 x 18 mm). Available in board mount, chassis mount, wire lead and DIN rail configurations. IEC 62368-1 certified models feature 4 kVac input to output isolation, a universal input voltage range of 85 to 264 Vac and a wide operating temperature range from -40 up to +70°C.
Read More »
Latest TTM210 AC/DC Switching Power Supply Features 300,000 hrs MTBF at Full Load
Offered in 5 x 3 x 1.5 in. (L x W x H) size open frame PCB package. Operated with 90 to 264 VAC universal input in 0°C to +40°C temperature range. Withstands voltages of 4,000 VAC (input to output), 1,500 VAC (input to ground) and 1,500 VAC (output to ground).
Read More »
New GXE600 Programmable AC-DC Power Supplies Help in Remote Preventive Maintenance
The GXE600 programmable AC-DC Power Supplies are offered with nominal 24V or 48V programmable output. The units accept input in the range of 85 to 265Vac and can be operated in -20 to +70°C temperature range. They are offered with isolation of 1,500Vac (input to ground), 4,000Vac (input to output) and 1,500VAC (output to ground) that are suitable for B and BF rated equipment. The devices are...
Read More »
Sager Electronics Offers New TPP 450 AC-DC Power Supplies for Space Limited Applications
The TPP 450 AC-DC Power Supplies are offered in TPP450-112-M, TPP450-115-M, TPP450-124-M, TPP450-136-M, TPP450-148-M models in standard 3 x 5 in. footprint. The devices feature 12V integrated fan output with variable speed control and can be operated in -40°C ~ 85°C temperature range. They are suitable for thermally challenged industrial applications that require maximum power in a small space.
Read More »
TDK Corporation Offers DTM250-D AC-DC Power Supplies That Meet Medical and ITE Standards
The DTM250-D AC-DC Power Supplies are available in 90 x 200 x 45 mm (W x L x H) vent-free enclosures and meets the stringent DoE Level VI and EU Tier 2 v5 standards. The units accepts 90 to 264VAC input voltage range and offers output 12, 19, 24, 28, 36, 48 and 54 V. They can be operated in -20 to +60°C temperature range and features isolation of 1,500Vac (input to ground isolation), 4,000Vac...
Read More »
Portek Power Introduces PMP250 Series AC/DC Power Supplies with Molex Mini-Fit Receptacle Output Connection
The PMP250 Series AC/DC External Switching Power Supplies are offered with PFC circuit design, 100 µA touch current and a no-load power consumption of less than 0.15 W. The units accept input voltage in the range of 80-264 VAC and deliver output between 220 and 250 W of continuous power. The devices come in 8 x 3.45 x 1.6 in. dimensions with a weight of 2.4 lbs. They feature insulation of 1500...
Read More »
Locon Sensors Withstand Extreme Temperatures
Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.
Read More »
