MIG Welder features multi-voltage power cord.
Able to connect to 115 and 230 V power receptacles, Millermatic-® DVI (Dual Voltage Input) MIG welding power source has 30-175 A operating range. It outputs 90 A @ 20% duty cycle while operating on 115 V and 150 A @ 40% while operating on 230 V. Unit utilizes dual-gear-driven, cast aluminum drive system and comes with power source, M-10 gun and cable assembly, 10 ft work cable and clamp, dual...
Read More »Switching AC/DC Power Supply generates nominal 60 W.
Industrial grade, 1U MPI-806H generates 80 watts with 8.6 cfm forced air, offers remote ON/OFF function, and is fully protected against output overload and short circuit. Able to automatically recover upon overload condition, unit has MTBF of greater than 130,000 hr. Power supply, which is suited for embedded system and mini ATX motherboard applications, also provides ATX output option and...
Read More »
AC/DC, TIG/Stick Power Sources have integrated cooler.
To prevent torch damage by monitoring coolant flow and temperature, SyncrowaveÃ-® 250 DX and 350 LX incorporate Cool-On-Demand(TM) feature. Syncro-Start(TM) technology provides choice of 3 starting conditions to optimize starts to match tungsten diameter and material thickness. Power sources, with welding ranges of 3-310 A and 3-400 A, also incorporate built-in consumables storage drawer,...
Read More »
AC/DC Welder offers 250 A output.
Ranger(TM) GXT provides AC/DC welder mated with AC auxiliary power generator that offers 11,000 W peak and 10,000 W continuous power. Unit includes remote control receptacle, full-KVA 120/240 V outlet, and four 120 V outlets. Fully enclosed case protects KohlerÃ-® 20 HP OHV gasoline engine, and operators can simultaneously weld and use AC generator power. It handles Stick, TIG, MIG, and...
Read More »
Choosing the Best Industrial Facial PPE Supplier: 5 Key Factors
Paulson is an industry leader in PPE production, most notably face and eye protection. Learn more now about what factors are most important to consider when choosing a PPE supplier.
Read More »
Orbital Welding Power Supply suits cleanroom applications.
Rated at 160 A, ORBIMAT 160CR features anodized aluminum panels, which eliminate risk of shedding from painted panels, keeping contamination to minimum. It includes automatic welding parameter generation facility and is capable of holding 2,000 four-level welding procedures. Each procedure incorporates Application Specification section that allows for storage of details of gas types and flow...
Read More »
Welding Power Supply welds aluminum components.
Orbimat 300 AC welds with either ac or dc, allowing orbital technique to be used for welding aluminum parts. Since ac balance and frequency can be controlled, operator can manipulate weld bead profile to suit application. Power supply works with any weld head from Orbimatic range, providing capabilities from 1.66 mm to 10 in. OD.
Read More »Welding System uses digital communication protocol.
Multi-process Power Wave-® 355M power source, with Power Feed(TM) 10M wire feeder, features push-pull aluminum MIG capabilities. It is also capable of Stick, TIG, MIG, Synergic MIG, Pulsed, and Flux-Cored welding as well as arc gouging. Unit features ArcLink-® open digital communications protocol and is rated 350 A, 34 V @ 60% duty cycle. Full amperage range is 5-425 A. Unit comes factory...
Read More »
Multi-MIG Welding Inverters monitor arc conditions.
Software-driven, Axcess(TM) 675 provides output of 675 A/44 V at 100% duty cycle, making it suited for large welds requiring long cycle times. Voltage range in CV mode is 10-44 V with 80 Vdc max open circuit voltage. Auto-Line technology enables machine to accept any primary power from 190-630 V, single- or 3-phase, 50 or 60 Hz. Auto-Axcess 675 offers same features but communicates through...
Read More »
Power and Output Converter works with dc sensors.
Python Power(TM) allows dc sensor to be installed in locations where only ac power is available and maximizes installation efficiency. It consists of universal in-line ac/dc power supply and TRIAC output switch, which is controlled by sensor's low-voltage output and automatically detects sinking or sourcing output. Design accepts universal input voltages from 85-265 Vac and can be pulled through...
Read More »
Multiprocess Inverter utilizes Auto-Line(TM) technology.
Weighing 80 lb, XMTÃ-® 350 CC/CV inverter is designed for those who regularly perform Stick, TIG, pulsed TIG, MIG, pulsed MIG, flux cored, or air carbon arc cutting and gouging. It features Auto-Line(TM) primary power management technology, 5-425 A output, and duty cycle rating of 60% @ 350 A/34 V. Product has single selector switch for process selection, adjustable dig and inductance...
Read More »
Optimize Your Storage or Distribution Facility with Steel King Rack Solutions
Steel King racks are designed to meet seismic requirements in the most demanding conditions. Our durable storage products help your company save on maintenance costs. Check out our product video or download our Rack Planning eBook to learn more.
Read More »
