Saelig Company Inc

Saelig Introduces OC51T Series of Oscillators Available in 10MHz to 40MHz Frequencies
Electronic Components & Devices

Saelig Introduces OC51T Series of Oscillators Available in 10MHz to 40MHz Frequencies

Available in a 9.7 x 7.5 x 4.1mm miniature 4-pad package with 3.3 and 5.0V supply voltage options. Output is specified with a 7ns maximum rise and fall time (20-80% of a waveform), an output load of 15pF, a duty cycle of 50% ±5%, with a power dissipation of 0.4W. Ideal for use in applications such as radio transmitters, cellular base stations, military communications equipment and also for...

Read More »
Saelig Launches Hioki CM4141 and CM4142 AC Clamp Meters to Deliver Accurate Results when Measuring Distorted AC Current Waveforms
Test & Measurement

Saelig Launches Hioki CM4141 and CM4142 AC Clamp Meters to Deliver Accurate Results when Measuring Distorted AC Current Waveforms

Features unique compact, sturdy jaw design for easy application around existing wiring as well as robust enough to push and pull wiring. Measures cable with a diameter of up to 55mm, providing the ability to measure even thick cables without needing to connect an additional flexible sensor. Parameters like AC current, AC/DC voltage, frequency, continuity, resistance, capacitance, diode and...

Read More »
New Siglent SDS5000X Series Oscilloscopes Offer a Maximum Record Length of 250 Mpts
Test & Measurement

New Siglent SDS5000X Series Oscilloscopes Offer a Maximum Record Length of 250 Mpts

The Saelig’s Siglent SDS5000X Series Oscilloscopes are offered in 2 or 4 channel versions with bandwidths of 350MHz, 500MHz, and 1GHz. The units offer a waveform capture rate of up to 480,000wfm/s in Sequence Mode. The device comes with serial decoding protocols such as I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S and MIL-STD-1553B. The oscilloscopes feature 10.1 in. capacitive touch screen,...

Read More »
Saelig Introduces AIM-TTi TGF4000 Series Waveform Generators with Sampling Rate of 800MSa/s
Agricultural & Farming Products

Saelig Introduces AIM-TTi TGF4000 Series Waveform Generators with Sampling Rate of 800MSa/s

The AIM-TTi TGF4000 Series Waveform Generators offer up to 20V pk-pk signals for up to 80 MHz frequency. The devices generate between 1uHz and 240MHz with low distortion up to 240 MHz. The units can store up to four waveforms internally and features AM, FM, PM, ASK, FSK, BPSK, SUM* and PWM modulation modes and burst mode operation enables user selected number of cycles at each trigger event. The...

Read More »
Saelig Presents VSG6G1C RF Vector Signal Generator with a Built-In Pulse Generator
Agricultural & Farming Products

Saelig Presents VSG6G1C RF Vector Signal Generator with a Built-In Pulse Generator

The VSG6G1C USB 6GHz RF Vector Signal Generator provides frequencies ranging from 1MHz to 6.1GHz. The device is equipped with an arbitrary function generator that generates a range of modulation such as AM, PM, FM analog, FSK, ASK, PSK, MSK, GMSK, SFSK and phase modulations such as CDMA, TMDA and GSM. The unit is housed in 4 x 1 x 1 in. metal case and delivers output levels up to 10 dBm and a...

Read More »
Saelig Presents IkaLogic SP2 Logic Analyzers That Offer Protocol Decoding Resolution of 200 MHz
Laboratory and Research Supplies and Equipment

Saelig Presents IkaLogic SP2 Logic Analyzers That Offer Protocol Decoding Resolution of 200 MHz

The IkaLogic SP2 Logic Analyzers consist of SP209 (standard) and SP209i (industrial) versions and feature Trigger-in and Trigger-out SMA connectors. The devices come with ScanaStudio software to capture, display, analyze, and decode signals. The units are offered in nine channel design with adjustable thresholds (1.8V, 2.5V, 3.3V, 5V). The devices compress and stream captured signals through USB...

Read More »
New GL Spectis 1.0 Touch Flicker Spectrometer Helps in Avoiding Flicker Issues
Laboratory and Research Supplies and Equipment

New GL Spectis 1.0 Touch Flicker Spectrometer Helps in Avoiding Flicker Issues

The Saelig GL Spectis 1.0 Touch Flicker Spectrometer is suitable for full CIE photometric and radiometric parameter calculation, LED Binning, Pass/Fail testing, remote control and data transfer. It can be operated in signal range of 0.1Hz – 12.5 kHz. The unit captures slow-motion sequences, modulation of the artificial light output at frame rates up to 480 fps. The device is equipped with...

Read More »
Saelig Introduces OC51T Series of Oscillators Available in 10MHz to 40MHz Frequencies
Electronic Components & Devices

Saelig Introduces OC51T Series of Oscillators Available in 10MHz to 40MHz Frequencies

Available in a 9.7 x 7.5 x 4.1mm miniature 4-pad package with 3.3 and 5.0V supply voltage options. Output is specified with a 7ns maximum rise and fall time (20-80% of a waveform), an output load of 15pF, a duty cycle of 50% ±5%, with a power dissipation of 0.4W. Ideal for use in applications such as radio transmitters, cellular base stations, military communications equipment and also for...

Read More »
Saelig Launches Hioki CM4141 and CM4142 AC Clamp Meters to Deliver Accurate Results when Measuring Distorted AC Current Waveforms
Test & Measurement

Saelig Launches Hioki CM4141 and CM4142 AC Clamp Meters to Deliver Accurate Results when Measuring Distorted AC Current Waveforms

Features unique compact, sturdy jaw design for easy application around existing wiring as well as robust enough to push and pull wiring. Measures cable with a diameter of up to 55mm, providing the ability to measure even thick cables without needing to connect an additional flexible sensor. Parameters like AC current, AC/DC voltage, frequency, continuity, resistance, capacitance, diode and...

Read More »
New Siglent SDS5000X Series Oscilloscopes Offer a Maximum Record Length of 250 Mpts
Test & Measurement

New Siglent SDS5000X Series Oscilloscopes Offer a Maximum Record Length of 250 Mpts

The Saelig’s Siglent SDS5000X Series Oscilloscopes are offered in 2 or 4 channel versions with bandwidths of 350MHz, 500MHz, and 1GHz. The units offer a waveform capture rate of up to 480,000wfm/s in Sequence Mode. The device comes with serial decoding protocols such as I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S and MIL-STD-1553B. The oscilloscopes feature 10.1 in. capacitive touch screen,...

Read More »
Saelig Introduces AIM-TTi TGF4000 Series Waveform Generators with Sampling Rate of 800MSa/s
Agricultural & Farming Products

Saelig Introduces AIM-TTi TGF4000 Series Waveform Generators with Sampling Rate of 800MSa/s

The AIM-TTi TGF4000 Series Waveform Generators offer up to 20V pk-pk signals for up to 80 MHz frequency. The devices generate between 1uHz and 240MHz with low distortion up to 240 MHz. The units can store up to four waveforms internally and features AM, FM, PM, ASK, FSK, BPSK, SUM* and PWM modulation modes and burst mode operation enables user selected number of cycles at each trigger event. The...

Read More »
Saelig Presents VSG6G1C RF Vector Signal Generator with a Built-In Pulse Generator
Agricultural & Farming Products

Saelig Presents VSG6G1C RF Vector Signal Generator with a Built-In Pulse Generator

The VSG6G1C USB 6GHz RF Vector Signal Generator provides frequencies ranging from 1MHz to 6.1GHz. The device is equipped with an arbitrary function generator that generates a range of modulation such as AM, PM, FM analog, FSK, ASK, PSK, MSK, GMSK, SFSK and phase modulations such as CDMA, TMDA and GSM. The unit is housed in 4 x 1 x 1 in. metal case and delivers output levels up to 10 dBm and a...

Read More »
Saelig Presents IkaLogic SP2 Logic Analyzers That Offer Protocol Decoding Resolution of 200 MHz
Laboratory and Research Supplies and Equipment

Saelig Presents IkaLogic SP2 Logic Analyzers That Offer Protocol Decoding Resolution of 200 MHz

The IkaLogic SP2 Logic Analyzers consist of SP209 (standard) and SP209i (industrial) versions and feature Trigger-in and Trigger-out SMA connectors. The devices come with ScanaStudio software to capture, display, analyze, and decode signals. The units are offered in nine channel design with adjustable thresholds (1.8V, 2.5V, 3.3V, 5V). The devices compress and stream captured signals through USB...

Read More »
New GL Spectis 1.0 Touch Flicker Spectrometer Helps in Avoiding Flicker Issues
Laboratory and Research Supplies and Equipment

New GL Spectis 1.0 Touch Flicker Spectrometer Helps in Avoiding Flicker Issues

The Saelig GL Spectis 1.0 Touch Flicker Spectrometer is suitable for full CIE photometric and radiometric parameter calculation, LED Binning, Pass/Fail testing, remote control and data transfer. It can be operated in signal range of 0.1Hz – 12.5 kHz. The unit captures slow-motion sequences, modulation of the artificial light output at frame rates up to 480 fps. The device is equipped with...

Read More »

All Topics