Saelig Company Inc
Fairport, NY 14450
Saelig Introduces AIM-TTi TGF4000 Series Waveform Generators with Sampling Rate of 800MSa/s
The AIM-TTi TGF4000 Series Waveform Generators offer up to 20V pk-pk signals for up to 80 MHz frequency. The devices generate between 1uHz and 240MHz with low distortion up to 240 MHz. The units can store up to four waveforms internally and features AM, FM, PM, ASK, FSK, BPSK, SUM* and PWM modulation modes and burst mode operation enables user selected number of cycles at each trigger event. The...
Read More »
Saelig Presents VSG6G1C RF Vector Signal Generator with a Built-In Pulse Generator
The VSG6G1C USB 6GHz RF Vector Signal Generator provides frequencies ranging from 1MHz to 6.1GHz. The device is equipped with an arbitrary function generator that generates a range of modulation such as AM, PM, FM analog, FSK, ASK, PSK, MSK, GMSK, SFSK and phase modulations such as CDMA, TMDA and GSM. The unit is housed in 4 x 1 x 1 in. metal case and delivers output levels up to 10 dBm and a...
Read More »
Saelig Presents IkaLogic SP2 Logic Analyzers That Offer Protocol Decoding Resolution of 200 MHz
The IkaLogic SP2 Logic Analyzers consist of SP209 (standard) and SP209i (industrial) versions and feature Trigger-in and Trigger-out SMA connectors. The devices come with ScanaStudio software to capture, display, analyze, and decode signals. The units are offered in nine channel design with adjustable thresholds (1.8V, 2.5V, 3.3V, 5V). The devices compress and stream captured signals through USB...
Read More »
New GL Spectis 1.0 Touch Flicker Spectrometer Helps in Avoiding Flicker Issues
The Saelig GL Spectis 1.0 Touch Flicker Spectrometer is suitable for full CIE photometric and radiometric parameter calculation, LED Binning, Pass/Fail testing, remote control and data transfer. It can be operated in signal range of 0.1Hz – 12.5 kHz. The unit captures slow-motion sequences, modulation of the artificial light output at frame rates up to 480 fps. The device is equipped with...
Read More »
Saelig Offers SDS2000X-E Series Oscilloscopes with Capture Rate of 400,000 Frames/sec
The SIGLENT SDS2000X-E Series Oscilloscopes are offered in 200 MHz and 350 MHz bandwidths. The devices offer a maximum sampling rate of 2GSa/s and a standard record length of 28 Mpts/ch. The oscilloscopes support multiple powerful triggering modes such as built-in serial bus triggering and decoding (I2C, SPI, UART, CAN, LIN). They utilize SPO technology that enables minimum vertical input range...
Read More »
New USB 3.0 SuperSpeed Isolator Supports Data Rate of 5Gbit/s
Saelig’s Alldaq ADQ-USB 3.0-ISO USB 3.0 SuperSpeed Isolators automatically detect superspeed, high-speed, full-speed or low-speed connections. The ADQ-USB 3.0-ISO-PS and ADQ-USB 3.0-ISO-W features 1kV (continuous) and 1.0kV (<60s) of isolation voltage between PC and USB device respectively. The devices can be operated in -20 to +70°C temperature range and come in 3.6 x 2.5 x 1.3 in. ( L x W x...
Read More »
Saelig Presents HT Mercury Digital Multimeter with a Data Logging Functionality
The HT Mercury Digital Multimeter is designed to measure AC/DC voltage up to 1000V, AC/DCcurrent up to 10A, resistance, continuity test, diode test, frequency and capacitance. The device is offered with built-in camera with 80 x 80 pixel resolution that can obtain simultaneous readings of thermal and electrical values. It delivers a sample rate from 1s to 15min and the infrared sensor can detect...
Read More »
Saelig Introduces Cleverscope CS448 Oscilloscope with an Isolated 65 MHz Signal Generator
The Cleverscope CS448 four-Channel 200MHz Oscilloscope is designed for measuring high voltages up to 1600 V. The device features input ranges of ± 8.0 V and can withstand 1 kV working voltage between each channel and ground. The unit delivers a sampling of 500 MSa/s and the four channels are phase aligned with skew of ±140 ps. It is offered with built-in Link Port for controlling accessory...
Read More »
Saelig Introduces Economical Teledyne Test Tools (T3) Range of Test Equipment
A new range of oscilloscopes, signal generators, power supplies, DMMs and spectrum analyzers is now available in the Teledyne LeCroy brand Fairport, NY, USA: Saelig Co. Inc. has announced the launch of Teledyne Test Tools (T3), a branded portfolio that adds a comprehensive range of test equipment to the range Teledyne LeCroy product offerings. T3 products complement and leverage Teledyne...
Read More »
Saelig Releases RMS-06x0 Radiation Measurement System Featuring a Dual Channel Receiver
The RMS-06x0 Radiation Measurement System consists of a measurement antenna and receiver with optional signal generator, a motorized turntable and application software. The system is designed for measuring antenna and equipment radiation patterns and Total Radiated Power (TRP) of RF device in 600MHz to 4/6GHz range. The device’s receiver allows the measurement of two polarizations in one...
Read More »
