Saelig Company Inc

Latest Teledyne LeCroy Mercury T2C/T2P USB2.0 Protocol and Power Analyzers Offer VBUS Analysis with Support for DisplayPort Auxiliary Channel Message Decoding
Laboratory and Research Supplies and Equipment

Latest Teledyne LeCroy Mercury T2C/T2P USB2.0 Protocol and Power Analyzers Offer VBUS Analysis with Support for DisplayPort Auxiliary Channel Message Decoding

Saeligs’ new Mercury T2P/T2C USB2.0 analyzers offer full support for USB 2.0 protocol testing and add USB Type-C analysis capabilities. The analyzers capture as well as decode the wide range of USB 2.0 device classes plus Type-C link states and Power Delivery 3.0 messages using two base models, the Mercury T2C and T2P. The power tracker tool monitors the real-time voltage and current on VBUS,...

Read More »
New SVA1015X Spectrum/ Vector Network Analyzer Offers Built-in Tracking Generator for Automatic Measurements
Laboratory and Research Supplies and Equipment

New SVA1015X Spectrum/ Vector Network Analyzer Offers Built-in Tracking Generator for Automatic Measurements

Saelig presents SVA1015X analyzer, a measuring tool for RF circuits and networks with a frequency range from 9 kHz to 1.5GHz. This swept super-heterodyne spectrum analyzer can work as a vector network analyzer, a frequency domain reflectometer and a modulation analyzer. It uses its built-in preamplifier to measure the magnitude and phase of the measured signals to quantify reflection coefficients...

Read More »
New Lucid LS RF Analog Signal Generators Feature Fast Switching Speed for Advanced Dynamic Range Applications
Agricultural & Farming Products

New Lucid LS RF Analog Signal Generators Feature Fast Switching Speed for Advanced Dynamic Range Applications

Saelig launches RF analog signal generators in three models, LS3081M, LS6081M and LS1291M in a compact form factor. The Lucid range of RF generators provide a switching speed of less than 100us, high signal integrity, low distortion and single-channel high-purity sine waves. The series offers modulation modes such as AM, FM, PM and Sweep with multi-instrument synchronization capability. It offers...

Read More »
New Rigol DS/MSO7000 Series Oscilloscope Provides Mixed-signal and Four Bandwidth Versions that Offers 16 Digital Debug Channels
Test & Measurement

New Rigol DS/MSO7000 Series Oscilloscope Provides Mixed-signal and Four Bandwidth Versions that Offers 16 Digital Debug Channels

Saeligs’ Rigol DS/MSO7000, the 4-channel oscilloscope offers 10GSa/s real-time sample rate, 100Mpts memory depth and a high waveform capture rate of over 600,000 waveforms per second. The series integrates a digital voltmeter, a 6-digit frequency counter and totalizer, an optional 2-channel waveform generator and a protocol analyzer with various serial protocol triggers and decodes. This scope...

Read More »
Saelig Launches TekBox TBMDA2/TBMDA3 RF Power Amplifiers with Built-in Modulation Capabilities to Generate 1 kHz AM/PM Signals
Communication Systems & Equipment

Saelig Launches TekBox TBMDA2/TBMDA3 RF Power Amplifiers with Built-in Modulation Capabilities to Generate 1 kHz AM/PM Signals

New modulated RF power amplifiers create signal sources for pre-compliance immunity testing of electronic PCBs and products using a spectrum analyzer's tracking generator output. The TBMDA2 and TBMDA3 power amplifiers are powered by external 5V and 100-240V respectively. Its input power ranges up to -8dBm/0dBm and can boost the output power of a tracking generator up to 500mW/5W or 40dB from...

Read More »
New SPD1168X Programmable DC Power Supply Offers a Transient Response Time of Less Than 50 us
Electrical Equipment & Systems

New SPD1168X Programmable DC Power Supply Offers a Transient Response Time of Less Than 50 us

SPD1168X Programmable Linear DC Power Supply is equipped with a 2.8 in. TFT-LCD display with remote computer control capability and a temperature-controlled fan. Unit provides 2-wire and 4-wire compensation output modes. SPD1168X comes with precision programmable output that can deliver up to 16V at 8A at a resolution of 1mV/1mA. Unit features a ripple and noise of ≤ 350uV RMS/3mVpp and < 2mA...

Read More »
New SLR-434M Smart Modem Transceiver Can Process up to Eight I/O Switching Signals
Communication Systems & Equipment

New SLR-434M Smart Modem Transceiver Can Process up to Eight I/O Switching Signals

Saelig’s SLR-434M Smart Modem Transceiver can transmit data in control systems using command protocol from an external source via RS232 or COMport interface. Unit delivers an output power of up to 10mW RF and can be used in simplex or duplex mode on 137 channels. Suitable for applications such as data transmission, telemetry, tunnel and bridge condition monitoring, the transceiver is operated...

Read More »
New KwikDraw-A Consoles from Saelig are Suitable for Space-Conscious Operations
Communication Systems & Equipment

New KwikDraw-A Consoles from Saelig are Suitable for Space-Conscious Operations

KwikDraw-A Rackmount LCD Consoles are offered for digital or analog operations in 17 and 19 in. forms and designed for IT infrastructures, such as CCTV surveillance or test-racks. Units provide interface options to applications from touch-screen slide console, to LCD consoles with KVM capabilities, and multiscreen displays with dual or triple screens. The consoles provide display choices of...

Read More »
New STD-302Z Multi-Channel Transceiver is Suitable for Remote Control Applications
Communication Systems & Equipment

New STD-302Z Multi-Channel Transceiver is Suitable for Remote Control Applications

Saelig’s STD-302Z 434MHz Narrow Band Multi-Channel Transceiver is designed with SAW filter and narrow-band filtering techniques. Unit features double super-heterodyne receiver with sensitivity down to -119dBm and a PLL-synthesized transmitter that delivers 10mW of RF power. Operated in -20 to +60°C temperature range with an input voltage of +3.0 to 5.5V, unit comes in 1.2 in. x 1.97 in. x 0.36...

Read More »
Saelig's New Nucleonics 765 Pulse Generator Offers 5V Pulses with Less Than 70ps Rising or Falling Time
Agricultural & Farming Products

Saelig's New Nucleonics 765 Pulse Generator Offers 5V Pulses with Less Than 70ps Rising or Falling Time

Saelig’s Nucleonics 765 Rise Time Pulse Generator is available in 2 or 4 channel versions and provides repetition rate of 240 MHz with 25ps period jitter specification. Unit is suitable for experimental colliders, laser modulation, mass spectroscopy, TDT and TDR applications. Nucleonics 765 comes with HDMI or USB interfaces, 7 in. 1024 x 600 capacitive touch LCD and built-in instrument controls...

Read More »

All Topics