Victor Technologies International, Inc
Chesterfield, MO 63017
Share:
Metal-Removal System suits gouging applications.
ARCAIR-MATICÃ-® N6000 provides control, uniformity, and productivity in automated air carbon-arc process gouging. Automatic Controller measures variations in arc voltage or amperage, compares them with pre-set standards, and takes action through feedback control. Its 1600 A Contractor supplies current to electrode contact shoe assembly in torch head. Torch head accepts gouging electrodes from...
Read More »
Tungsten Carbide Wires withstand earth moving applications.
StoodyÃ-® 130 semi-automatic open arc wire resists metal to earth wear and works on carbon or low alloy steel. This makes it suitable for welding scoop lids and teeth, pug mill knives, cultivator chisels, Raymond mill plows, and tillage tools. Wire is available in 0.062 in. dia with ranges of 90-120 A and 18-24 V, and wire extension of 1/4 in., and in 7/64 in. dia with ranges of 120-150 A and...
Read More »
Die Wires for repairing metalworking components.
ToolTherm 225FC-G flux cored, gas shielded die wires have tensile strength of 140,000 psi, making them suitable for applications including forging hammers, die impressions, shafts, and rams. Wires are available in 3/32 and 1/8 in. dia; 3/32 in. wire has current range of 350-500 A and wire extension of Ã-¾ to 1Ã-¼ in.; 1/8 in. wire has current range of 500-700 A with wire extension of 1 to...
Read More »
Cutting Torch cuts, burns, and pierces tough materials.
ArcairÃ-® SLICEÃ-® cutting system handles virtually any metallic, non-metallic, or composite material, including bridge steel, concrete-lined pipe, and highway guardrails. Torch requires no preheating. Operators supply oxygen and welding machine, or 12 V battery for portable applications. Torch has pistol grip, operator shield for protection from heat and sparks, squeeze lever for oxygen...
Read More »
Wire welds in virtually any position.
All position (AP) 2209T-1 gas shielded flux cored wire can be welded with either 100% CO2 or Argon/CO2 gas mixtures. Wire features spray like arc transfer and slag removal. AP 2209 wire is available in .045 and 1/16 in. dia. Former has 130 to 220 amperage range and 24 to 27 voltage range, while latter offers 170 to 300 amperage range and 25 to 28 voltage range. Composition is balanced to achieve...
Read More »
Wire Feeder provides remote voltage control.
UltrafeedÃ-® 4000 4-roll wire feeder is suitable for semi-automatic welding with solid and flux-cored wires from 0.024 to 1/8 in. Offering 50 to 875 ipm speed control with built-in compensation for changes in line voltage and feed roll load, it adjusts run-in speed and ramp up to match power source start characteristics. Features include no-tools, quick-change feed rolls, rotatable feed head,...
Read More »
Plasma Cutter offers short repositioning time.
Aviator XLT, with FastCAM automatic nesting software, combines liquid-cooled plasma system with Burny 1250 CNC control to produce precision cutting of 12 ga steel at 250 ipm or 1/4 in. stainless at 100 ipm. Traverse speed is 500 ipm and vertical-lift speed of C&G AVC Plus plasma torch lifter 150 ipm. Welded, tubular-steel frame supports integrated 6 x 12 ft down-draft cutting table. Pneumatic air...
Read More »
Welding Wire suits pulverizer rebuilding applications.
Stoody(R) CP2000 open arc-welding wire, composed of chromium-carbide alloy, can be applied to carbon, low alloy, and manganese steels. Stoody CP-2000 has hardness HRC of 58-64, and is suitable for hot-wear applications up to 900 deg F. Model with 7/64 in. dia has 400 to 650 amperage range and voltage range of 28 to 32. Model with 1/8 in. dia wire has 450 to 650 amperage range and voltage range of...
Read More »
Alternator provides power for stick welding.
Power-Plus(R) Exciter(TM) TA-6/200-KBC provides 5.5 kVA of 115/230 Vac auxiliary power, 200 dc amps @ 60% duty-cycle welding output, and 12/24 V battery charger. Separate windings are used for welding and auxiliary power. Generator is powered by 15 hp, 1-cylinder, gas fueled, air-cooled engine. Alternator provides smooth weld output for STICK or scratch-start dc TIG welding applications. It fits...
Read More »
Portable DC Inverter offers constant-current output.
Single-phase, 230/460 Vac, 50/60 Hz P-Wee(R) 250 GTS power source is designed for STICK, high frequency TIG, and Lift Start TIG welding applications. It includes adjustable hot start and automatically adjusts arc control for smooth operation with all electrodes. Standard controls include gas valve, built-in sloper, spot timer, pulser, and high-frequency starting. Fixed preflow is provided and...
Read More »