Victor Technologies International, Inc
Chesterfield, MO 63017
Share:
Plasma Cutting System produces finished gouges.
CUTMASTER(TM) 100 features PCH-102 SureLokÃ-® torch with MaximumLife(TM) electrode. Highly visible arc makes it easy for operator to see and control. IGBT variable power supply delivers up to 80 A of cutting current. Extended torch tip and streamlined shield cup allow beveling at angles up to 45 degrees. Tip Saver(TM) current fold-back circuit prevents tip failure that can result when tip...
Read More »Open Arc Welding Wire withstands high stress applications.
StoodyÃ-® 600 offers abrasion and impact resistance and produces titanium carbide bearing deposit. Wire is available in 7/64, 3/32, and 1/16 in. dia. Wire with 7/16 in. dia has 45-550 amperage (A) range, 30-32 voltage (V) range, and 1Ã-½ in. wire extension. Wire with 3/32 in. dia has 400-500 A range, 28-30 V range, and 1Ã-½ in. wire extension. With 1/16 in. dia, wire has 225-275 A...
Read More »Plasma Cutting Systems offer 600 V configurations.
CUTMASTER(TM) 75 and CUTMASTER 100 plasma cutting systems are available in 600 V configurations to meet Canadian and some US applications needs. PCH-102 SureLokÃ-® torch with MaximumLife(TM) electrode is standard. Extended tip and streamlined shield cup allow beveling at angles up to 45Ã-
Read More »Flux-Cored Wires resist elements and improve conductivity.
Copper-covered Thermal Arc-® SF-1 and SF-1A (E71-T1) flux-cored welding wires prevent moisture absorption and rust. They have no seams, flux voids, or strip seams. Sizes range from .045 to .052 in. diameter. SF-1 is welded in CO2 shielding gas while SF-1A is designed for 75 Argon-25CO2. Both wires feature low spatter and easily removed slag cover.
Read More »Torch works with almost any plasma cutting system.
Model 1Torch(TM) works with high-frequency, blow-apart, and touch-start plasma systems from any major manufacturer. Ergonomic handle provides sure grip for operator comfort, resulting in less operator fatigue. Advanced Torch Connector (ATC) makes it easy to connect or disconnect torch with less than one thread turn. Model 1Torch is available for systems with rated outputs up to 100 A.
Read More »Plasma Cutting System provides 30 A output current.
CUTMASTER 38 air plasma cutting system includes 1Torch(TM), which is designed to reduce operator fatigue. Flexible leads promote maneuverability, while outer cover resists heat and chemical damage. Pilot arc cuts through paint and rust. Auto restart feature for cutting expanded metal maintains arc while cutting over holes for quicker, smoother cutting. Auto voltage selection (115-230 V input)...
Read More »Welding Wire welds through mill scale, dirt, and rust.
Thermal Arc TR S-6 copper-coated wire contains high levels of manganese and silicon and is designed for GMAW welding under CO2 or AC/CO2 shielding gases. It produces low spatter level, which minimizes post-weld clean up. Wire diameters range from .024 to .045. Applications include sheet metal work, tanks and pipe work, and automotive and truck body work.
Read More »Torches suit underwater cutting and welding.
Sea TorchÃ-® Combination Torch features 1-piece body and is fully insulated electrically for safety. It weighs 4.5 lbs, is equipped with 10 ft of cable, and is bright orange for high diver visibility. Arcwater IIÃ-® Combination Torch is suitable for gouging or cutting steel, stainless steel, and other metals. It converts to underwater torch by changing collets. Unit weighs 5.5 lbs and...
Read More »Welder produces 450 amps at 100% duty cycle.
Thermal Arc-® Power-Master 500 operates with stick/lift TIG/MIG multiprocess capability. Controls include arc force for stick welding and variable inductance for fine-tuning arc to match wire type used in MIG and flux cored applications. Digital meter allows both amperage and voltage to be preset.
Read More »Welding Wire can be used on under-carriage components.
Thermaclad 42 submerged arc-welding wire offers temper resistance as well as resistance to metal-to-metal frictional wear and cold deformation. It is 1/8 in. in diameter, with DC amperage range of 400 to 500 A and voltage range of 27 to 29 V. Thermaclad 42 can be used for build-up and hardfacing on rollers and idlers, and is also suitable for crane wheel and mine-car wheel applications.
Read More »