Fairchild Semiconductor Corp.
San Jose, CA 95134
Share:
Bipolar Transistor suits induction heating applications.
Model FGL60N100BNTD is a 1,000 V/60 A Insulated Gate Bipolar Transistor that combines trench technology and non-punch through technology. It offers switching speeds of 130 ns and low saturation voltage of 2.5 V at 60 A. Avalanche immunity protects unit from field failure caused by break down avalanche during off-state. Available in TO-264 package, lead-free transistor meets or exceeds...
Read More »Controller/Driver Chipset suits VRM CPUs and processors.
Model FAN5019 multi-phase PWM controller and Model FAN5009 dual MOSFET driver form chipset that is part of VRM/VRD10.x power solution. Temperature-compensated inductor current sensing measures current and accurately sets and maintains loadline. FAN5009/FAN5019 chipset allows regulators to scale from 2, 3, or 4 phases and conveys 12 V main supply into core supply voltage.
Read More »Switches suit video display design.
Switches offer 1.45 mmÃ-² packages for hand-held and portable electronics. Model FSAV330 quad SPDT switch offers bandwidth of >300 MHz, allowing analog video signal to pass with minimum distortion. Ultra low cross talk and off isolation of -60 db at 10 MHz minimizes ghost image between active channels. Models FSAV331, dual 4:1 video multiplexer/demultiplexer, and FSAV332 quad SPST also...
Read More »MOSFET suited for Li-ion battery protection.
Model FDC6000NZ dual N-Channel MOSFET power switch has 0.8 mm maximum height and 9.0 mm-² maximum area and provides electrical and thermal performance critical to Li-ion battery pack protection. Power dissipation of 1.6 W is achieved with maximum steady state current of 7.3 A. It limits switching losses and provides low-voltage drop solution for mobile phones, PDAs, digital cameras, palmtop...
Read More »Analog Switches suit portables and instrumentation.
Available in normally open and normally closed versions, Series FSA125x dual SPST switches provide low On Resistance of 0.95 ohm, low leakage current of 2 nA, and low charge injection of 20 pC to minimize offset error in signal sample/hold applications. Units operate from 1.65-5.5 V with 5.5 kV ESD performance. Total Harmonic Distortion of 0.002% makes them suited for portable audio signal...
Read More »Power Switches suit video-system applications.
PowerSaver(TM) 30 W FSDM0565R, 60 W FSDM07652R, and 75 W FSDM0365RN switches achieve low standby power by using integrated high-voltage start-up regulator and burst-mode standby operation. They combine avalanche-rated SenseFET for current sensing with current-mode PWM IC. Fixed-frequency oscillator limits EMI. With pulse-by-pulse current limiting and internal soft start, switches are suited for...
Read More »MOSFETs suit power factor correction applications.
Models FCP11N60 and FCPF11N60 utilize SuperFET(TM) technology, which implements compensation region using multi-epitaxy layer to improve on-resistance. Both models provide di/dt of 1,430 A/-µsec max, resulting from wide body-diode profile. Other characteristics include RDS(on) of 0.32 ohm, low effective output capacitance of Coss=35nC, and optimized gate charge levels of Qg=40nC. Models FCP11N60...
Read More »MOSFETs suit automotive applications.
PowerTrenchÃ-® N-Channel, 30 V MOSFETs, Models FDD044AN03L, FDU044AN03L, FDD068AN03L, and FDU068AN03L are offered in D-PAK and I-PAK packaging for surface or through-hole mount designs. At 3.9 mOhms max, Models FDD044AN03L and FDU044AN03L offer lowest RDS(on) at 30 V available in TO-252 and TO-251 packages, respectively. All four are qualified to AEC-Q101 standard. Applications include motor...
Read More »Triple Video Driver offers HD/SD filtering capability.
Selectable for High Definition (30 MHz) or Standard Definition (8 MHz) signal filtering, FMS6418A removes high-frequency noise prior to digitizing signal or artifacts introduced during D/A conversion in encoder for RGB or YUV signals. Video filter, available in 16-pin SOIC package, has triple 6th order filters and combines 2:1 multiplexer on each filter channel with filtering and output drive...
Read More »Triac-Driver Optocouplers come in compact MFP packaging.
Offered in 4-pin, mini-flat packages (MFP), random-phase optocouplers consist of IR LED, optically coupled to silicon bilateral switch. They allow power triac to be triggered at any point on ac voltage waveform and offer peak blocking voltages of 250, 400, and 600 V. Available with trigger current options of 5, 10, and 15 mA, units have steady-state isolation voltage of 3,750 Vrms; full pitch,...
Read More »