Fairchild Semiconductor Corp.
San Jose, CA 95134
Share:
Planar MOSFETs suit multi-market applications.
Series C and V2 QFETÃ-® planar MOSFETs combine DMOS and planar stripe structure technologies. They offer reduced on-state loss by lowering on-resistance and reduced switching loss by lowering gate charge and output capacitance. Products come in standard surface-mount and through-hole type packages and are suitable for power supplies, power factor correction, DC/DC converters, plasma display...
Read More »
Intelligent Power Switch offers slew rate control up to 3 A.
Model FDC6901L integrates P-Channel MOSFET with slew rate controller IC. With 3 programmable slew rates of 600, 41, and 24 V/ms, unit can be programmed to drive wide range of capacitive loads. It minimizes EMI and offers low RDS(on) of 180 milliohms max. Regulated turn-on is provided to reduce inrush current. Strong pull-up buffer quickly turns off internal MOSFET, since rise time is less than 7...
Read More »
Error Amplifier suits power conversion applications.
Model FOD2742 Optically Isolated Error Amplifier features tolerance as low as 0.5%. It incorporates optocoupler, precision reference, and error amplifier into 8-pin SOIC package. Unit provides isolated voltage feedback between secondary and primary sides of power conversion circuits for control and regulation purposes. Reference voltage tolerances include 0.5, 1, and 2%. Model FOD2742 has UL,...
Read More »
Multi-Terminal Logic Package measures 1.6 x 1.6 x 0.55 mm.
Utilizing encapsulated chip-on-substrate approach, MicroPak 8 consists of one 8-terminal chip scale leadless package for 1-, 2-, and 3-bit logic and switch functions. TinyLogicÃ-® MicroPak 8 package maintains 0.5 mm terminal pitch while its 0.2 x 0.3 mm land grid array contact pads ensure joint integrity under harsh environmental stresses. Currently offered is the UHS logic family which...
Read More »
LED Lamps provide full color in portable devices.
Surface-mount QTLP650D-RGB is top illuminating for back-lighting and status indication. Side-illuminating, right-angle QTLP614C-RGB is for edge lighting LCD displays. Low profile QTLP650D-RGB and QTLP614C-RGB lamps have heights of 1.1 and 1.5 mm, respectively. Lamps provide red, green, or blue color output, and can mix RGB light sources for multi-color output. They may be used with company's LED...
Read More »
Power Switch allows use of smaller size transformers.
Model FS6X1220RT, suited for dc/dc forward or fly-back power supply applications, integrates fully avalanche-rated SenseFET with current mode PWM IC. Off-line power switch offers over-voltage, over-load, cycle-by-cycle current limit, and thermal shutdown protection. Product uses integrated 300 kHz oscillator and provides line-under voltage detection, remote sleep on/off, under-voltage lock out,...
Read More »
LED Lamps provide alternative to incandescent lamps.
Series QTLP673C surface-mount PLCC-4 package LED lamps are top-illuminating, high-brightness lamps for interior automotive lighting and traffic management signals. Lamps sustain high drive current and produce colors with luminous intensity range of 178-920 mcds. Housing package has 3.2 x 2.8 mm footprint and 1.8 mm profile. Units feature clear optics, moisture-proof packaging, and 120Ã-
Read More »
MOSFETs suit small form factor DC/DC power supplies.
Models FDC796N and FDC3616N are 30 V, 9 mOhm and 100 V, 70 mOhm N-Channel MOSFETS that handle 1.8 W of power dissipation. They combine PowerTrench-® technology and SuperSOT(TM)-6 FLMP package. Both offer low RDS(on) rating of 14 nC and low gate charge of 23 nC in package occupying 9 mm-² of PCB area. Combining FDC3616N for primary side switch locations, and FDC796N for synchronous rectifier...
Read More »USB Transceiver has Micro Leadframe Package.
Enabling designers to add USB 1.1 functionality to space-limited, portable designs, USB1T11ABQ interfaces 5.0 or 3.3 V standard or programmable logic to USB physical layer and supports 12 Mb/s and 1.5 Mb/s data transmission rates. Product offers I/O signal compatibility with USB Implementers Forum's VHDL Serial Interface Engine specification and utilizes JEDEC MO-220 (3 mmÃ-²) form factor,...
Read More »
Analog Switch preserves signal integrity.
Model FSAT66, low-voltage, SPST analog switch uses TTL-level control circuitry so designers can route higher voltage signals with lower voltage control levels. Normally Open MicroPak(TM) package is 1.45 mmÃ-², and is smallest form factor with this function available. Unit offers minimal THD of 0.011% and is suitable for use in audio applications, mobile phones, digital cameras, and other...
Read More »