Walter Valenite
Waukesha, MI 53188
Share:
Tooling Packages are designed for Mori Seiki lathes.
VM modular quick-change lathe tooling packages include 12 sizes of OD turning and grooving VM 63 tools, 8 end mill adapters, 4 turning adapters, 4 ID boring VM63 tools, 5 boring bar adapters, 3 shell mill adapters, 8 collet chuck adapters, 2 tap adapters, 2 hydraulic chuck adapters, 1 extension, and 3 reducers. All VM modular tooling is through-hardened to Rc 48-52 with ground V-flange. Tools are...
Read More »
Inserts handle high temperature alloys and iron.
New products include wiper geometry PVD milling and turning inserts; M750 Milling System for malleable and cast irons; SV209 and VC949 coated carbide grades for turning titanium, titanium alloys, and nickel and cobalt based alloys; and APET high shear PCVD coated TPC25 carbide inserts for stainless and high temperature alloys. PVD coated SpectraTurn(TM) and SpecraMill(TM) inserts are coated with...
Read More »
Electronic Column Gage includes DIN rail mounting clip.
VE-21 is designed for gaging 0.0001 to 0.1 in. It has self-diagnostic testing capability as well as flash programming for in-the-field updates. Quick-release mounting clip allows multiple units to be snapped together. Column accepts 2 half-bridge transducers and displays readings on analog display. It includes analog input, analog output, programmable 24 Vdc control inputs and outputs,...
Read More »
Quick Change Lathe Packages suit Mori Seiki machines.
VM modular tooling packages are available for MT Series 253/1000-1500 and MT 253S/1000-1500 machine models. Packages include 12 sizes OD turning and grooving VM 63 tools, 8 end mill adapters, 4 turning adapters, 4 ID boring VM63 tools, 5 boring bar adapters, 3 shell mill adapters, 8 collet chuck adapters, 2 tap adapters, 2 hydraulic chuck adapters, 1 extension, and 3 reducers. VM modular tooling...
Read More »
Coated Carbide Inserts can turn tough alloys.
Carbide cutting tool inserts handle high temperature alloys. SV209 has micro-grain carbide substrate with multi-layer CVD coating, while VC949 has aluminum titanium nitride PVD coating over micro-grain carbide substrate. SV209 can turn chrome cobalt alloys, inconels, hastelloys, stellites, and stainless steels. VC949 can turn titanium and titanium alloys. Both grades are available in LM...
Read More »
Tooling Packages provide fast tool changeover.
VM modular quick-change tooling packages are designed for use with Mazak Integrex 100Y, 200Y, 200SY, 300Y, and 400Y machine models. Machines are equipped with spindles that accept tooling connection. All tooling is balanced to G2.5 @ 6000 rpm, and through-hardened to Rc 48-52 with ground V-flange.
Read More »
Insert Drills feature four cutting edges.
Top Cut Plus indexable-insert, coolant-fed drilling systems can use 3 different positive rake insert geometries, each with 4 cutting edges. Metric sizes are from 11 to 34 mm. The 2X diameter drill is used for maximum drilling rigidity; 3X drill is for general-purpose usage; and 4X is for deep hole drilling. All have rigid shanks that meet DIN 6595/IS0 9766 standard. Drills can be applied...
Read More »
Ceramic Insert Grade works with cast iron.
Fine-grain, silicon-nitride Quantum Q60 is formulated for high-speed rough turning and both rough and finish milling of cast irons. Speeds range from 1000 to 3800 sfm depending on depth of cut. Q60 is available in all types of turning and milling geometries. For finish turning, wiper radius insert geometry is available.
Read More »
Turning and Milling Inserts are PVD coated.
SpectraTurn(TM)and SprectraMill(TM) inserts are coated with TiAln or AlTiN for edge strength and wear resistance. Heat produced in cutting process is carried away by chip. TiAlN coated insert grades are suitable for dry milling and for high-speed turning. AlTiN coated inserts are ideal for milling titanium and titanium alloys.
Read More »
Chucks have through-coolant capability.
Featuring thick wall design, Power Milling Chucks resist deflection even under heavy side loading. Concentricity is within .0002 in. T.I.R. at the nose. Seals are used to resist contamination of internal components. Chucks are available in BT 40 and CAT 40 and 50 shank sizes in 3/4 in. and 1 1/4 in. chuck capacities. Accessories include 2 straight slotted bushing/collet designs to handle shank...
Read More »