Walter Valenite

N22 W23855 RidgeView Parkway West

Waukesha, MI 53188

Laboratory and Research Supplies and Equipment

Copy Mills suit die and mold operations.

Designed for roughing, semi-finishing, and finishing operations, ValMILL(TM) V500 Copy Mills utilize RDMT (top form chipbreaker style) or RDMW round inserts. Products are available in 8 end mill sizes that range in diameter from .500-1.5 in. and in length from 4.07-7.44 in. Face mills, available in 5 sizes, are offered in diameters from 2-6 in. End mills use 2 inserts on each cutter, and face...

Laboratory and Research Supplies and Equipment

Ball-Nose End Mills are designed for punishing cuts.

Suited for rough milling and semi-finishing operations, ValMILL(TM) V440 Series ball-nose cutters have 2-flute design with one insert per flute and additional insert along tool shank that provides protection for larger cutter diameters. Multi-tooth end mills perform contouring, produce peripheral cuts, slot, drill, and mill die and mold cavities. Products, offered in 6 diameter sizes from .625-2...

Laboratory and Research Supplies and Equipment

Face/End Mills generate 90-

ValMILL(TM) V590 Cutters accommodate ramping and helical interpolation. They eliminate secondary machining operations that are required when producing 90Ã-

Architectural & Civil Engineering Products

Toolholder System provides insert interchangeability.

ValTURN(TM) ProGRIP(TM) has spring-loaded clamp design that allows insert to be gripped in 2 directions. Inserts can be changed despite holder position, and interchangeability of clamping components allow same toolholder shank to be used for carbide, ceramic, or CBN insert designs. Product is available in 98 different insert and lead angle shank styles to accommodate cast iron, steel, stainless...

Construction Equipment and Supplies

Parting/Grooving System offers PCD and CBN grades.

ValGROOVE(TM) System is available in VSG single-edge and VTG twin-groove, double-edge insert styles. Single-edge style includes 5 geometries for general, light, precision, radius, and under-cut grooving. VSG inserts are available in 3 carbide grades with TiCN/Al203/TiN CVD coating, multi-layer PVD TiAlN coating, and uncoated. VTG double-edge inserts include geometries for general grooving and...

Cutters provide slotting, slitting, and cut off.

ValMILL(TM) 350 Cutters feature close pitch design with all inserts positioned in line for chip evacuation. Two coated carbide grades are available. VP5815 general purpose, PVD TiAlN coated finishing grade is for machining steel, stainless steel, cast iron, and aluminum. VP5845 roughing grade has TiN/TiCN CVD coating for machining steel and stainless steel. Cutters range in dia from 3-10 in. They...

Construction Equipment and Supplies

Insert suits roughing/semi-finish/finishing applications.

ValTURN(TM) VP 1510 cast iron grade insert has multi-layer MTCVD coating that enables machining of gray, nodular, malleable, and compacted graphite cast irons as well as powdered metals. Smooth coating surface reduces build-up on edge and prevents chipping. Product offers deformation-resistant substrate with heat- and wear-resistant MTCVD TiCN/Al203 coating. Insert is available in 6 top form...

Laboratory and Research Supplies and Equipment

End Mill suits die/mold applications.

ValMILL(TM) 400 finishing ball nose end mill employs cutter design with TorxPlus(TM) insert locking mechanism. End mill cutter bodies are available in 6 cutter diameters from .375-1.25 in., and max recommended speeds range from 32,500-40,000 rpm. Product uses precision ground, VP5007 grade inserts that have 2 effective teeth per insert and provide cutting diameter accuracy of Ã-

Construction Equipment and Supplies

Machining Inserts handle high-temperature alloys and iron.

SpectraTurn(TM) and SpectraMill(TM) milling and turning inserts are PVD-coated with titanium-aluminum nitride or aluminum-titanium nitride. Other products include M750 Milling System for malleable and cast irons; SV209- and VC949-coated carbide grades for turning titanium, titanium-alloys and nickel- and cobalt-based alloys; and APET high-shear, PCVD-coated TPC25 carbide inserts for stainless and...

Laboratory and Research Supplies and Equipment

Milling System machines cast and malleable iron components.

M750 Milling System, with silicon-nitride ceramic and coated-carbide grades, offers 2 milling cutter bodies in 6 diameters from 3.94 to 12.40 in. for 45Ã-