Organix Solutions
Maple Grove, MN 55369
Share:
Gas Purifiers have self-regulating design.
Model HP2 helium purifier provides point-of-use purification of helium or other noble gases to sub-ppm levels of impurities. Model NP2 purifies nitrogen to sub-ppm levels of gaseous impurities. Purification substrate in both gas purifiers is non-evaporable gettering alloy, contained in welded assembly. Self-regulating design eliminates thermal runaway, and maintains getter material at optimal...
Read More »
3-D Scanner runs on Windows NT4.0, 2000, and 98.
LMS-Z210 3-D laser-imaging scanner maps targets at distances up to 450 m. It offers True Color Channel for texturing of 3D Models. In 30 seconds, up to 240,000 points can be mapped, generating nearly 10,000 measurements per second. Scanning Field of View is 300 deg by 80 deg. Information, processed through 8-bit parallel data output, is connected directly to ECP compatible LDP printer port....
Read More »
Horizontal Lifeline works on I-beams or concrete.
Miller(R) DeltaForce(TM) horizontal lifeline lets workers maintain 100% tie-off for continuous fall protection along entire lifeline. It attaches to rebar or single flared coil inserts and is available in single-span systems up to 60 ft and multiple-span systems up to 300 ft. System includes 2 end stanchions, 3/8 in. steel galvanized wire rope lifeline, inline shock absorber, turnbuckle,...
Read More »
Workstation provides vibration isolation.
9100 Series is available with load capacity of either 800 or 1300 lbs, and is Class 100 cleanroom compatible. Tabletops range from 24 x 36 in. to 36 x 72 in., and are available in honeycomb or composite. Active-Air Suspension provides vibration-controlled work environment with low natural frequencies. Preset zero deflection level is maintained regardless of load addition or removal. Faraday Cages...
Read More »
Battery Straps protect rechargeable battery packs.
MF-SVS, MF-VSN and MF-VS Multifuse(R) Polymeric Positive Temperature Coefficient straps, with resettable fuses, enhance safety and performance of rechargeable batteries. MF-SVS has initial resistance as low as 14 mOhms and protects Lithium and Ni-MH chemistry cells; MF-VS210N, for GSM battery packs, and MF-VS170N, for lower pulse current applications, have maximum voltage of 12 V, and maximum...
Read More »Software Tool connects OEMs to their products.
SitePort(TM) suite helps OEMs support their customers and maximize machine performance. It provides access to customers' equipment controls, drives, PLCs, and software via Internet. It allows OEMs to provide customers with real-time technical support, emergency software backup and recovery services, analysis of equipment performance, response to equipment problems in real-time, and download of...
Read More »
Frame Sensor detects parts passing through.
FRS and CAD frame sensors detect part passing thru or dwelling in detection area. Sensors with areas up to 200 x 250 mm can detect parts as small as 4 mm dia. Smaller sensors detect parts down to 2 mm dia. Sensing devices are enclosed in aluminum, industrial housing. Response time is 1 msec and outputs are NPN, PNP, normally open, and normally closed. Power requirement is 24Vdc. On board...
Read More »
Emissions Monitor processes data according to EPA regulations.
MicroCEM(TM) continuous emissions monitoring system comes in 2 compact, field-mountable weather-resistant NEMA 4X rated enclosures. It measures oxygen, carbon monoxide and NOx using paramagnetic, NDIR and chemiluminescent technologies. Built-in data acquisition and handling system (DAHS) stores relevant raw and diluent corrected emissions data, status information, calibrations and alarms for...
Read More »
Anti-Roll System is designed for company's cryostats.
Glass anti-roll system provides efficient and easy solution for cryomicrotomy. It consists of reusable metal frame and glass insert. All 4 edges of insert can be used. Back of metal frame is equipped with spacers to ensure optimum distance to knife holder for sectioning without manual adjustments. Existing CE and CN cryostat knifeholders, manufactured from 1996 can be upgraded.
Read More »
Focusing Fibers detect ultra-small targets.
Focused-beam fibers pipe light into otherwise inaccessible locations, and focus beam to very small spot, allowing fiber-optic sensors to detect small parts. Fibers come in fixed and adjustable sensing distance models. L4C6 and L4C20 convergent lens attachments allow sensing at fixed focal distances of 0.24 and 0.79 in., respectively, with spot dia. as small as 0.01 in. Other attachments include...
Read More »