Master Bond, Inc.    Hackensack, NJ 07601
Jan 14, 2011 Designed to bond to similar and dissimilar substrates, Master Bond EP13ND requires no mixing, has unlimited working life at room temperature, and features service operating temperature of -60 to 450°F. Product cures at temperatures of 300-350°F in 60-90 minutes. Upon cure, adhesive obtains tensile shear strengths in excess of 3,500 psi at 75°F. Formula is 100% reactive, does not contain solvents or diluents, and offers resistance to fuels, acids, bases, oils, and many solvents.

Surface Guard, Inc.    Aurora, IL 60504
Dec 17, 2010 Used during processing, assembly, and shipping, Surface Guard® 73 provides temporary protection of complex - textured, rugged, coarse - surfaces. Combination of polyethylene film coated with blend of aqueous adhesives results in masking that is soft and aggressive, while chemistry provides high tack and medium-high peel. Properties also ensure clean removal when protection is no longer needed. Film comes in widths from 1-80 in. and lengths to 15,000 ft.

Master Bond, Inc.    Hackensack, NJ 07601
Dec 15, 2010 With thermal conductivity over 22 BTU/in/ft²/hr/°F and serviceability from -60 to +400°F, EP21ANHT helps mitigate issues associated with tightly packed components and miniaturized electronic circuits. This 2-component adhesive, sealant, and coating has 1:1 mix ratio by weight or volume and cures at room or elevated temperatures. Also able to act as electrical insulator, cured adhesive exhibits dielectric strength over 400 V/mil and tensile shear strength over 1,000 psi.

Henkel Corporation    Rocky Hill, CT 06067
Nov 23, 2010 Suited for medical device and industrial assembly applications, Loctite® 3979(TM) fills moderate gaps without migrating beyond intended location. Translucent and non-sagging gel cures in seconds upon exposure to UV/visible light and fluoresces red to facilitate on-part detection prior to or following cure. Offering adhesion up to 3,500 psi on plastic, metal, and glass substrates, single-component product is ISO-10993 biocompatible and withstands temperatures from -65 to +300°F.

Henkel Corporation    Rocky Hill, CT 06067
Nov 22, 2010 Designed for confectionary, energy bars, ice cream, and other snack food applications, Liofol CS 22-861US1 adheres well to many substrates, including barrier films and surface-treated films for monoweb and laminated structures. Product provides clean wipe, low foam, compatibility with release films and lacquers, and extended shelf life up to 6 months for drums and totes. With Liofol, coating weights are consistent and streaking is virtually eliminated.

Epoxies Etc.    Cranston, RI 02921-3407
Nov 19, 2010 Formulated to cushion and protect sensitive electronic circuits, components, and devices, Green Potting and Encapsulating Compound is moisture-resistant and imparts very little stress on components during cure or thermal cycling. Raw materials are listed under different FDA CFR 21 Sections, allowing use in applications where there is direct food contact. Base Natural Oil Polyol is obtained directly from plant source without chemical modifications.

Aremco Products, Inc.    Valley Cottage, NY 10989
Nov 18, 2010 Used to bond advanced ceramics, circuit boards, optical components, and semiconductors for dicing and polishing operations, Wafer-Mount(TM) 559 is available in 10 x 10 x 0.005 in. sheet and can be cut to desired shape. Semi-rigid, solvent-resistant, plastic film has PSA layer that accommodates machining operations that produce heat, vibration, and peel stresses. After use, substrate is removed from adhesive film by heating to 300°F for 2-3 min.

Henkel Corporation    Rocky Hill, CT 06067
Nov 17, 2010 Designed to meet UL-674 requirements for explosion-proof motors, Loctite® E-40EXP(TM) maintains more than 85% of its compression strength following exposure to 13 harsh chemicals. Two-component compound is used to pot and seal wire conduits, isolating electric motor from hazardous vapors and chemicals that could cause explosion. Curing in approximately 2 hours at room temperature, material will not expand and experiences very little shrinkage, facilitating accurate dispensing.

Henkel Corp.    Madison Heights, MI 48071
Nov 16, 2010 Loctite® 4310(TM) Flashcure® Light Cure Instant Adhesive is low-viscosity formulation that fills gaps to 0.005 in. using moisture cure and up to 0.5 in. with exposure to light. High-viscosity Loctite® 4311(TM) Flashcure® Light Cure Instant Adhesive fills gaps to 0.008 in. with moisture cure, and with light, fills up to 0.5 in. gaps. Able to withstand temperatures from -65° to +180°F, both impact- and fracture-resistant adhesives cure in 2-5 sec when exposed to low-intensity UV/vis light.

Master Bond, Inc.    Hackensack, NJ 07601
Nov 12, 2010 Formulated for applications subject to temperature cycling, vibration, and mechanical shock, EP21TDCHT-LO withstands cryogenic temperatures and meets NASA low outgassing specifications. It offers 1:1 mix ratio by weight or volume and cures at room temperature or more rapidly at elevated temperatures. Properties include 4K to +350ºF service temperature range, shear strength exceeding 2,500 psi, peel strength of greater than 20 pli, and Shore D hardness of greater than 60.

Pres-On Products, Inc.    Addison, IL 60101
Nov 11, 2010 Available in widths from ¼-52 in., PBWMF-4 Masking Film consists of 3.0 mil polyolefin film coated with removable acrylic adhesive, suitable for protecting glass, auto trim, clear-coated aluminum, and other highly polished finishes. Adhesive does not build over time and will remove cleanly from most surfaces up to 1 year after deployment. Adhesive delivers cling-like, low initial grab, which allows for clean repositioning while providing environmental resistance from -20 to 150°F.

Henkel Corporation    Rocky Hill, CT 06067
Nov 08, 2010 Suited for medical device bonding, Loctite® Flashcure® Light Cure Instant Adhesives cure tack-free in 2-5 sec upon exposure to low-intensity UV/visible light. Loctite® 4310(TM) fills gaps to 0.005 in. using only moisture cure and can cure to depths up to 0.5 in. on exposure to light, while Loctite® 4311(TM) fills larger gaps to 0.008 in. using moisture cure and cures to depths of 0.5 in. upon exposure to light. Both are fluorescent for inspection purposes and meet ISO 10993 biocompatibility standards.

Graphic Products, Inc.    Beaverton, OR 97008
Nov 04, 2010 XpressPeel Premium Vinyl Tape features slit in back liner that facilitates removal of liner or backing material from sticky side of label prior to application. Tape comes in variety of colors and can be engineered to meet indoor/outdoor visual communications needs since it is resistant to UV light, humidity, water, oil, alcohol solvents, cleaning agents, and stretching. Available in widths from ½-4 in., tape is suited for pipe marking, OSHA safety labeling, 5S labeling, and color-coding.

Surface Guard, Inc.    Aurora, IL 60504
Nov 01, 2010 Featuring polyolefin film coated with aqueous-based acrylic adhesive, Surface Guard® 112 Series provides surface protection during processing, assembly, and shipping while enabling removal when no longer needed. Product is moisture-resistant and adheres to UV, AR, and anti-scratch coated plastics, such as acrylics, PC and PET, and countertops. Available in widths from 1-80 in. and lengths up to 15,000 ft, film can be printed with brand identity or technical information.

Surface Guard, Inc.    Aurora, IL 60504
Oct 29, 2010 Featuring polyolefin film coated with aqueous-based acrylic adhesive system, Surface Guard® 69 Series has low initial tack that allows masking to be repositioned after first contact. Products offer high adhesion build over time, water resistance, and optimal shear with clean peel. Available in widths from 1-80 in. and lengths up to 15,000 ft, films provide surface protection during processing, assembly, and shipping while enabling removal when no longer needed.

Master Bond, Inc.    Hackensack, NJ 07601
Oct 22, 2010 Developed for coating and lining storage tanks, piping, scrubbers, and processing equipment in chemical industry, Master Bond EP21ARHT produces bond strength greater than 2,200 psi once fully cured. Also used in electronic, electrical, and metalworking industries, product can withstand immersion in 96-98% sulfuric acid and 20% hydrochloric acid for more than 1 year. Epoxy features dielectric strength of 440 V/mil and can be thermally cycled over temperature range of -60 to +400°F.

Aremco Products, Inc.    Valley Cottage, NY 10989
Oct 21, 2010 Intended for electrical and electronic assembly applications to 360°F, Aremco-Bond(TM) 616 electrically and thermally conductive, 2-part adhesive is formulated using silver-coated glass spheres. It exhibits volume resistivity of less than 0.005 ohm-cm at room temperature and thermal conductivity of 0.4 W/m-°K. Mixed in 1:1 ratio by weight, adhesive has 1,000 psi tensile shear strength, 78 Shore D hardness, and 50,000-60,000 cP mixed viscosity range.

Epoxies Etc.    Cranston, RI 02921-3407
Oct 20, 2010 Potting, encapsulating, and casting resin 20-2121 consists of 2-component, room temperature curing system that will cushion sensitive electronic components. With toxicity level that reduces employee exposure to dangerous chemicals, moisture-resistant compound imparts minimal stress on components during cure or thermal cycling. Characteristics include 2,000 psi tensile strength, 80 Shore A Hardness, and respective viscosities of 14,000 and 800 cps @ 25°C for Polyol and Isocyanate.

Surface Guard, Inc.    Aurora, IL 60504
Oct 15, 2010 Featuring polyolefin film coated with SUR-Guard adhesive system, Surface Guard® 96 Series exhibits medium to low peel values that remain stable over time. Removable and repositionable films can protect variety of surfaces including flat painted walls and textured surfaces, as well as smooth and glossy surface types. Typically supplied on 1.5-8 mil polyethylene films, Surface Guard® 96 Series is available in widths from 1-80 in. and lengths up to 15,000 ft.

Carboline Co.    St. Louis, MO 63144
Oct 14, 2010 Suited for galvanized steel and other non-ferrous metals, water-based Galoseal WB creates tenacious bond, which optimizes topcoat adhesion to galvanized metal surfaces. Low VOC formula accepts 2-component solvent-containing finishes such as epoxies and urethanes. Product contains no heavy metals or mineral acids and provides dry film thickness of 0.5-1.0 mils.