Schroff Development Corporation
Mission, KS 66222
Earthquake-Proof Cabinets resist shock and vibration.
With cold roll steel frame and reinforced structural steel corner angles, Tecnorack Series customizable seismic Zone 4 cabinets protect contents against shock and vibration. Products, available in heights from 15-47 U, widths to 1,200 mm, and depths to 1,000 mm, feature static load capacity of 2,000 lb and dynamic load-carrying capability of 1,600 lb. Options include vented sides, custom...
Read More »
Card Guides can be cut to desired length.
Card guides feature UL94-V0 flammability rating, tapered entrance, and positive retention installation clips. Screw-down feature is available on molded card guides, and extruded aluminum guide is mechanically screwed into position. Customizable for specific applications using 3-part guide, products include 160 and 220 mm deep SBC guides and 80 mm rear transition board guides. Line supports 4.4...
Read More »
Ejection/Insertion Handle exerts forces higher than 200 N.
Addressing requirements of PICMG 3.0 specification, inject/eject hot swap handle for AdvancedTCA(TM) boards is ergonomically designed with intuitive open/close mechanism that separates switch actuation of hot-swap microswitch from inject/eject process. Dual-stage design permits board to shut down electronically before mechanical ejection process begins. Handle locks in open position, preventing...
Read More »
Integrated Chassis support shelf management.
AdvancedTCA(TM) Systems feature 5-slot full mesh backplane with 2 hub slots, and independent fan controller that interfaces to temperature sensor on air exhaust and supports up to 200 W per slot. One configuation supports dual 4U high shelf managers, which are hot swappable and provide bussed IPMB interface. Chassis include dual 48 V inputs on rear, shielding, and 19 in. rackmount capability. AC...
Read More »Modular Electronic Enclosures offer aesthetic styling.
Designed for indoor use, Minirack and Eurorack 19 in. cabinets are suited for packaging electronics in various applications. Former measures 16 U x 22 in. x 24 in., while latter measures 38 U x 24 in. x 24 in. Both incorporate self-supporting inner frame construction with aluminum die cast top and bottom bolted to 4 extruded aluminum uprights. Capacities range from 440-880 lb, and open top and...
Read More »
ATCA System provides programmable fan control.
Designed to meet all NEBS requirements, 14-slot AdvancedTCA(TM) system has backplane available in topologies such as full mesh, dual star, and dual dual star. Product includes 3 independent fan trays, each with dual cooling pathways, and incorporates 2 integrated shelf manager/fan controllers based on Pigeon Point technology that provide redundancy as well as thermal and system management....
Read More »
Electronics Cabinet meets military standards.
Series 20,000 19 in. cabinet uses design-for-manufacturing methods to enable customer to select x-axis, y-axis, and z-axis dimensions according to application. It employs welded steel construction with interlocking components. Pre-tapped No. 10-32 holes within rack angles conform to EIA spacing. Rack angles are located in C channel mount that permits infinite positional, front-to-rear adjustment...
Read More »
CompactPCI Backplanes offer bridging capability.
CompactPCI backplanes enable bridging of multiple backplanes and come with rear I/O on 6U and 3U versions. Suited for 19 in. applications, units are PICMG 2.0 R3 compliant with hot-swap capability and are available in 2-8 slot versions. Operating at 66 MHz, backplanes utilize ceramic capacitors that provide safe decoupling of high frequency surge voltages and operate over temperatures from -22 to...
Read More »
Open Frame Rack protects equipment during earthquakes.
Seismic Open Frame Rack, available in 19 and 23 in. widths, is suitable for data communication centers and telecommunication equipment central offices situated in earthquake-prone regions. It meets requirements of Telcordia GR-63-CORE Zone 4, using test load of 1,000 lb. Base is manufactured using 0.180 in. thick cold rolled steel, while rest of rack uses 0.125 in. thick cold rolled steel....
Read More »
Enclosure combines chassis, backplane, and power supply.
Thermally managed, 10U-high system incorporates 21-slot VME64 extensions backplane with P0 connectors. Shielded EMC 19 in. subrack can accommodate up to 21 6U x 160 mm deep boards and 21 rear, 6U x 80 mm deep transition cards with ESD clips installed in each card guide. System includes wide range input, power factor correction, and 1,000 W, 4-ouptut power supply. Hot-swappable, speed controlled...
Read More »
Earthquake-Proof Cabinets resist shock and vibration.
With cold roll steel frame and reinforced structural steel corner angles, Tecnorack Series customizable seismic Zone 4 cabinets protect contents against shock and vibration. Products, available in heights from 15-47 U, widths to 1,200 mm, and depths to 1,000 mm, feature static load capacity of 2,000 lb and dynamic load-carrying capability of 1,600 lb. Options include vented sides, custom...
Read More »
Card Guides can be cut to desired length.
Card guides feature UL94-V0 flammability rating, tapered entrance, and positive retention installation clips. Screw-down feature is available on molded card guides, and extruded aluminum guide is mechanically screwed into position. Customizable for specific applications using 3-part guide, products include 160 and 220 mm deep SBC guides and 80 mm rear transition board guides. Line supports 4.4...
Read More »
Ejection/Insertion Handle exerts forces higher than 200 N.
Addressing requirements of PICMG 3.0 specification, inject/eject hot swap handle for AdvancedTCA(TM) boards is ergonomically designed with intuitive open/close mechanism that separates switch actuation of hot-swap microswitch from inject/eject process. Dual-stage design permits board to shut down electronically before mechanical ejection process begins. Handle locks in open position, preventing...
Read More »
Integrated Chassis support shelf management.
AdvancedTCA(TM) Systems feature 5-slot full mesh backplane with 2 hub slots, and independent fan controller that interfaces to temperature sensor on air exhaust and supports up to 200 W per slot. One configuation supports dual 4U high shelf managers, which are hot swappable and provide bussed IPMB interface. Chassis include dual 48 V inputs on rear, shielding, and 19 in. rackmount capability. AC...
Read More »Modular Electronic Enclosures offer aesthetic styling.
Designed for indoor use, Minirack and Eurorack 19 in. cabinets are suited for packaging electronics in various applications. Former measures 16 U x 22 in. x 24 in., while latter measures 38 U x 24 in. x 24 in. Both incorporate self-supporting inner frame construction with aluminum die cast top and bottom bolted to 4 extruded aluminum uprights. Capacities range from 440-880 lb, and open top and...
Read More »
ATCA System provides programmable fan control.
Designed to meet all NEBS requirements, 14-slot AdvancedTCA(TM) system has backplane available in topologies such as full mesh, dual star, and dual dual star. Product includes 3 independent fan trays, each with dual cooling pathways, and incorporates 2 integrated shelf manager/fan controllers based on Pigeon Point technology that provide redundancy as well as thermal and system management....
Read More »
Electronics Cabinet meets military standards.
Series 20,000 19 in. cabinet uses design-for-manufacturing methods to enable customer to select x-axis, y-axis, and z-axis dimensions according to application. It employs welded steel construction with interlocking components. Pre-tapped No. 10-32 holes within rack angles conform to EIA spacing. Rack angles are located in C channel mount that permits infinite positional, front-to-rear adjustment...
Read More »
CompactPCI Backplanes offer bridging capability.
CompactPCI backplanes enable bridging of multiple backplanes and come with rear I/O on 6U and 3U versions. Suited for 19 in. applications, units are PICMG 2.0 R3 compliant with hot-swap capability and are available in 2-8 slot versions. Operating at 66 MHz, backplanes utilize ceramic capacitors that provide safe decoupling of high frequency surge voltages and operate over temperatures from -22 to...
Read More »
Open Frame Rack protects equipment during earthquakes.
Seismic Open Frame Rack, available in 19 and 23 in. widths, is suitable for data communication centers and telecommunication equipment central offices situated in earthquake-prone regions. It meets requirements of Telcordia GR-63-CORE Zone 4, using test load of 1,000 lb. Base is manufactured using 0.180 in. thick cold rolled steel, while rest of rack uses 0.125 in. thick cold rolled steel....
Read More »
Enclosure combines chassis, backplane, and power supply.
Thermally managed, 10U-high system incorporates 21-slot VME64 extensions backplane with P0 connectors. Shielded EMC 19 in. subrack can accommodate up to 21 6U x 160 mm deep boards and 21 rear, 6U x 80 mm deep transition cards with ESD clips installed in each card guide. System includes wide range input, power factor correction, and 1,000 W, 4-ouptut power supply. Hot-swappable, speed controlled...
Read More »