Metrobility Optical Systems Inc.
Foxboro, NH 02035
Share:
Optical Ethernet Demarcation Device is MPLS-ready.
Multi-port Ethernet Services Provisioning Platform delivers EFM/OAM-managed services over VLANs and MPLS in metro Ethernet network. Addressing demands of business for VoIP and high-speed data and video, it aggregates multiple services at customer edge for scalable and expandable MPLS infrastructure. Services can be provisioned and monitored using IP/SNMP and IEEE802.3ah OAM concurrently, while...
Read More »T1/E1 Multiplexer supports distances to 20 km.
Combining T1/E1 single-strand, bi-directional wavelength (BWDM) multiplexer with Ethernet BWDM allows TDM voice and high-speed data traffic to co-exist on fiber pair, without intermixing traffic types. Where fiber is installed between buildings, system can eliminate point-to-point T1 or E1 lines for each location by creating single, private, voice/data network. Optical transmission is immune to...
Read More »Network Interface Device adheres to IEEE 802.3ah standard.
As CPE demarcation point, Gigabit E-Services Network Interface Device supports VLAN-aware bridging and provides flexible MEF-compliant E-Line services. It monitors health and status of devices and network connections, including remote optical link loopback testing, integral optical power monitoring, and IEEE 802-compliant and RMON Group 1 statistics to determine quality of line. Intelligent...
Read More »Multiplexer suits metro access and campus networks.
Radiance 4000 utilizes Gigabit Ethernet line card with wavelength-specific SFP pluggable optics based on ITU-T industry standard 20 nm spacing. Line card, available as copper-to-fiber or fiber-to-fiber, provides inline electrical conversion mechanism for monitoring optical power of every link. Scalable R4000 supports up to 12 wavelengths from 1350-1610 nm, and enables service providers to offer...
Read More »Two-Slot Chassis provides Ethernet-based connectivity.
Modular, dual DC-powered, DIN-rail mounted Model RD20-24 supports 2 modules, offering copper-to-fiber connectivity between copper-based devices on factory floor to control room. It can be equipped with line cards to support AUI, BNC, 10/100 Ethernet, single-strand, bi-directional wavelengths for double fiber capacity, Gigabit Ethernet, redundant links, 4-port switch, and remote management...
Read More »Optical Network Unit meets IEEE recommendations.
The RA21 Optical Network Unit enables reliable optical Ethernet services to business and residential users through point-to-point fiber-based network infrastructure. It provides 100 Mbps fiber connection from service provider's network to 10/100 Mbps auto-negotiating connection to enterprise network. Product is managed from central office through NetBeacon Element Manager for remote failure...
Read More »Media Converter meets RFI emissions standards.
AutoTwister(TM) 2643 copper-to-fiber media converter meets requirements for immunity to RFI interference as defined by FCC and CISPR Class B standards. Suited for use in businesses and medical treatment centers located in residential zones as well as personal residences, media converter provides auto-negotiation of speed (10/100 Mbps) and duplex in Ethernet and Fast Ethernet environments. Unit...
Read More »Multiplexer doubles capacity of single fiber strand.
Gig-E Bi-directional Wavelength Division Multiplexer utilizes two wavelengths to carry two channels in different directions on one strand of fiber. Product converts electrical signals to wavelengths on one strand of fiber, providing manageable solution to achieve distances up to 20 km. At one end of connection one wavelength is used to transmit, while another wavelength is used to receive. Unit...
Read More »Connectivity/Access Products offer line protection/restoration.
GigE redundant twisterÃ-® offers primary and back-up links between two network switches, routers, or bridges and automatic failover of less than 200 msec. Radiance R200 single-slot chassis has internal power supply and supports access line cards. Chassis stacking line card manages up to 126 ports with 1 IP address, auto-negotiates 10/100 connections, and has four RJ-45 interfaces. Delta Class...
Read More »
Fiber Optic Connector ensures data transmission up to 100 km.
Delta Class Twister offers built-in cable management and protection, visible link and activity LEDs, and can mount to any office wall. It incorporates remote loopback, Link Loss Carry Forward, Link Loss Return, Far End Fault, and auto-recovery as well as automatic negotiation of full and half duplex modes and automatic crossover. Twister is available for 100 and 10/100 Mbps copper-to-fiber...
Read More »Home Telephone Connects with Metrobility
Metrobility solution streamlines management of subscriber services and RBOC services Merrimack, NH - April 4, 2006 - Metrobility Optical Systems today announced that Home Telephone Company has selected Metrobility's Ethernet access solution to provide managed Ethernet services to local government and business, and to create a managed demarcation point between Home Telephone and the neighboring...
Read More »Metrobility and fSONA Announce Fully Redundant, Broadband Wireless Solution
Companies Partner to Provide High speed Optical Wireless Ethernet solutions with Link Protection and Restoration Capabilities for Both Fast Ethernet and Gigabit Ethernet Networks Merrimack, NH - February 8, 2006 - Metrobility Optical Systems and fSONA Systems today announced a highly robust, fully redundant, carrier-class optical transmission solution for point-to-point wireless broadband...
Read More »Metrobility Optical Systems Receives Russian Certification for its Radiance Family of Products
Merrimack, NH - January 18, 2006 - Metrobility Optical Systems has received certification for its Radiance family of products from the Russian RF Ministry of Information Technologies and Communications for compliance with relevant Russian safety requirements and product standards. The testing was carried out through the company's Russian distributor, EMAG. The certifications allow the approved...
Read More »Metrobility Optical Systems Sees the Future of Network Element Management
Merrimack, NH, October 24, 2005 - Metrobility Optical Systems, a leading optical networking company providing carrier Ethernet connectivity, access, wavelength multiplexing and management solutions, today announced its next-generation element management system (EMS) software. NetBeaconÃ-® ESP supports FCAPS (fault, configuration, accounting, performance, and security) management objectives...
Read More »Metrobility Teams with Sunrise Telecom to Demo Ethernet Services Loopback to Service Providers
Merrimack, NH - October 11, 2005 - Metrobility Optical Systems will be demonstrating Service Level Agreement (SLA) verification through its patent-pending Logical Services Loopback, a non-disruptive, in-service loopback, at the upcoming Ethernet Expo Show in New York City, October 12 - 14. Metrobility's patent-pending Logical Services Loopback (LSL) overcomes the end-to-end service verification...
Read More »Metrobility Names Key Executives
Expands management team to manage revenue growth Merrimack, NH-October, 17, 2005-Metrobility Optical Systems, a leading provider of carrier Ethernet access equipment, today announced the promotion of four managers to newly created executive positions which reflect an expansive period of company growth. The skill and leadership demonstrated by these individuals consistently contributes to...
Read More »Metrobility Unveils Expanded Carrier Ethernet Strategy
Merrimack, NH -October 12, 2005- Metrobility Optical Systems today announced details of a strategic initiative to deliver carrier Ethernet metro access solutions to service providers through its AccessEthernet(TM), AccessMPLS(TM) and AccessTDM(TM) technologies deployed at the customer edge. These technologies allow Metrobility to align future products according to MEF requirements for carrier...
Read More »Optical Ethernet Demarcation Device is MPLS-ready.
Multi-port Ethernet Services Provisioning Platform delivers EFM/OAM-managed services over VLANs and MPLS in metro Ethernet network. Addressing demands of business for VoIP and high-speed data and video, it aggregates multiple services at customer edge for scalable and expandable MPLS infrastructure. Services can be provisioned and monitored using IP/SNMP and IEEE802.3ah OAM concurrently, while...
Read More »T1/E1 Multiplexer supports distances to 20 km.
Combining T1/E1 single-strand, bi-directional wavelength (BWDM) multiplexer with Ethernet BWDM allows TDM voice and high-speed data traffic to co-exist on fiber pair, without intermixing traffic types. Where fiber is installed between buildings, system can eliminate point-to-point T1 or E1 lines for each location by creating single, private, voice/data network. Optical transmission is immune to...
Read More »Network Interface Device adheres to IEEE 802.3ah standard.
As CPE demarcation point, Gigabit E-Services Network Interface Device supports VLAN-aware bridging and provides flexible MEF-compliant E-Line services. It monitors health and status of devices and network connections, including remote optical link loopback testing, integral optical power monitoring, and IEEE 802-compliant and RMON Group 1 statistics to determine quality of line. Intelligent...
Read More »