Dual-Lead Inserts speed high-volume installation in plastics.
Inserts

Dual-Lead Inserts speed high-volume installation in plastics.

Zap-Serts are threaded inserts for multiple insertion applications in plastics and thermoplastics. With identical leads at both ends, fasteners may be positioned for acceptance by high-speed automated machinery. Solid brass units feature radial barbs that resist pull-out and torque. Thread sizes range from 4-40 in. to 5/16-18 in. and M3 to M8. Custom sizes are available in most user-specified...

Read More »
Molecular Bonding System enables welds up to 6 ft away.
Welders

Molecular Bonding System enables welds up to 6 ft away.

CADWELD® PLUS System performs exothermically welded electrical connections. Tamper proof, integrated weld metal package consists of steel cup containing CADWELD weld metal alloys and ignition source. It joins copper to copper, steel, copper-clad steel, bronze/brass/stainless steel. Connections withstand repeated fault currents without failing during operation. They offer current-carrying...

Read More »
Orbital Weld Heads weld pipe in place.
Welders

Orbital Weld Heads weld pipe in place.

Redhead weld heads, used with digital Tubemaster Power Source, are designed for orbital welding of pipe/tubes from 0.5-6.625 in. Products can be used for autogenous welding applications or with optional wire feeder. Mechanical device maintains constant arc length on out-of-round pipes, and design incorporates continuously adjustable clamping. Weld heads mount on one side of weld joint, allowing...

Read More »
Robotic MIG Gun suits harsh environments.
Robots

Robotic MIG Gun suits harsh environments.

Lightning Robotic MIG Gun (LRMIG) employs quick-change taper lock seating gooseneck that allows neck to be removed and installed quickly. Timed for repeatability, gun is compatible with Tregaskiss® and can be modified to fit various front and rear configurations.

Read More »
Glass Tapered Inserts suit high-throughput systems.
Fabrication Services

Glass Tapered Inserts suit high-throughput systems.

With push-point design that provides sample access down to 10 Â-µL, 0.7 and 1.0 mL Glass Tapered Inserts are available assembled in 96-Square Deep Well Polypropylene Microplates. Inserts and plate can be autoclaved, offer thermal stability and chemical resistance, and can be used with shakers and vortexers. Microplates assembled with 0.7 mL or 1.0 mL inserts can be sealed with respective...

Read More »
Welders

Multi-Process Welder maintains stable, smooth arc.

Capable of Stick, TIG, MIG, Synergic MIG, Pulsed, and Flux-Cored welding as well as arc gouging, Power Wave® 355 ArcLink® power source with Power Feed(TM) 10M wire feeder features push-pull aluminum MIG capabilities and utilizes ArcLink digital communication protocol. It includes 60+ Waveform Control Technology(TM) welding programs and allows for control of welding process variables....

Read More »
Torches

Nozzles optimize thin-plate metal cutting.

With FineCut(TM) Consumables, hand- and machine-torch operators cutting thin-plate, mild and stainless steel will obtain narrow kerf and small heat affected zone. FineCut also eliminates secondary operations such as dross removal. Consumables are used on Powermax 380, 600, 1000, 1250, and 1650, as well as comparable legacy systems. Starter kit includes 5 nozzles, 2 swirl rings, 5 electrodes,...

Read More »
Welders

Welder/Generator incorporates Kohler LPG engine.

Multi-process Ranger(TM) 250, powered by low-emission liquid propane gas, utilizes Chopper Technology(TM), which provides smooth arc and low spatter. It delivers 250 A for welding at 100% duty cycle and 9,000 peak W of 120 V/240 AC generator power. Welder features downhill pipe welding mode, arc control adjustment, and touch-start TIG mode. Its 20 hp Command® LPG OHV engine features...

Read More »
Welding Wire is clean and copper-free.
Welding Rods, Wire and Electrodes

Welding Wire is clean and copper-free.

NovaTech Welding Wire is available in 85+ filler materials that are chemically certified, copper-free, and conform to AISI and AWS specifications for chemical composition. Able to match most tool, die, and mold repair requirements, product is offered in 7 micro sizes from 0.003-0.025 in. dia and large diameters from 0.030-5/32 in. Wire is manufactured in certified AISI tool steels, austenitic and...

Read More »
Welders

Welding Systems offer automated, on-site operation.

AutoBoreWelder 1000, 2000, 3000, and 5000 enable uniform weld build-up for bore, flange and OD shafts, and valve repair work. Systems interface with other portable machine tools, and allow one set-up for both welding and boring. AutoBoreWelder 3000 enables precise control of weld placement throughout application. Auto-skip function allows user to designate Weld-Only or Skip-Weld areas. Model 5000...

Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Sponsored

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics