Afc-Holcroft Installs New Caab(TM) Furnace Line in China

AFC-Holcroft is pleased to announce the recent installation of CAAB™ furnace for a division of a prestigious, multi-national corporation. The installation was delivered to the customer's facility located in China and will be used in the production of heat exchangers. The order for a the Controlled Atmosphere Aluminum Brazing (CAAB™) System included a gas heated continuous drying oven,...

Read More »
CW Low-Moded Laser is designed for thin material spot welding.

CW Low-Moded Laser is designed for thin material spot welding.

Used when welding thin materials or where it is preferred that weld is not visible from back, Low-moded 200 W laser evenly spreads energy over- area to- remove high intensity peak. Beam is tailored to suit application with- appropriate degree of intensity and mode stability, resulting in profile that avoids cratering or break throughs in spot weld. CW or- up to 100 kHz modulation capability...

Read More »
ABB Robotics and Fronius Reach Global Agreement to Collaboratively Develop Fully Equipped Welding Packages

ABB Robotics and Fronius Reach Global Agreement to Collaboratively Develop Fully Equipped Welding Packages

Relationship will provide customers cost-effective robotic welding systems, easier operation, and integrated programming interfaces AUBURN HILLS, Mich. – ABB Robotics and Fronius International, a leading worldwide welding equipment company, have entered a global agreement to collaboratively develop fully equipped robotic welding packages, and support both new and existing customers with...

Read More »
Welding Brushes are designed for different base metals.

Welding Brushes are designed for different base metals.

Radius™ Welding Brushes clean base material before welding and between each pass. Featuring steel-wire bristles, brushes for stainless steel include toothbrush-style 3 x 7 row brush, 2 x 9 row brush with slightly curved handle, and 3 x 19 row brush. For aluminum, toothbrush-style 3 x 7 row brush and 2 x 9 row brush with slightly curved handle have brass-wire bristles. With tempered-steel...

Read More »
Sonobond's Free, No-Obligation Ultrasonic Bonding Viability Test Helps Companies Find Practical, Cost-Effective Solutions for Their Textile and Filtration-Assembly Applications

Sonobond's Free, No-Obligation Ultrasonic Bonding Viability Test Helps Companies Find Practical, Cost-Effective Solutions for Their Textile and Filtration-Assembly Applications

Sample ultrasonic bonds are made using materials supplied by prospective customers.-  Sonobond then recommends the appropriate ultrasonic bonding equipment to match each firm’s specific needs and requirements. WEST CHESTER, PA - Janet Devine, President of Sonobond Ultrasonics, announced today that the company's free Ultrasonic Bonding Viability Test is proving to be very important to firms in...

Read More »
Threaded Tube Inserts offer thread sizes from 3/8-16 to ¾-10.

Threaded Tube Inserts offer thread sizes from 3/8-16 to ¾-10.

Available in tube sizes from 1.5–2 in., SQH Square Heavy Duty Series and RDH Round Heavy Duty Series are made from black glass-filled nylon with brass threaded insert, making them suitable for indoor and outdoor use. Corrosion-resistant units feature static load rating up to 2,000 lb. For tilting- and swiveling capability, SQH and RDH can be used in conjunction with AFM Series Swivel/Tilting...

Read More »

Echelon Highlights Fast Payback Applications for Smart Street Lighting and Smart Buildings at the Light+Building Fair

Echelon's Proven, Open Standard, Multi-Application Energy Control Networking Platform Delivers Energy Savings Today and Enables A Sustainable Future FRANKFURT, Germany - Echelon Corporation (NASDAQ: ELON) will showcase several Smart Street Lighting and Smart Building solutions, built on Echelon's proven, open standard, multi-application energy control networking platform, at the world's leading...

Read More »
Cobar's Advanced Technologies Featured in the APEX Hand Solder Competition

Cobar's Advanced Technologies Featured in the APEX Hand Solder Competition

The Balver Zinn/Cobar Group announces that its SN100C Wire Solder and Cobrush flux applicator were demonstrated at the first Hand Solder Competition at the recently held IPC APEX EXPO in San Diego. During the two-day hand soldering competition, numerous companies competed to build a functional electronics assembly in 30 minutes. Assemblies were judged on soldering in accordance with IPC-A-610E...

Read More »
Multi-Process Welder serves heavy equipment, construction jobs.

Multi-Process Welder serves heavy equipment, construction jobs.

Rated 650 A @ 100% duty cycle with amperage range of 10-815 A, IP23- and Desert Duty(TM)-rated Flextec(TM) 650 comes in 21.83 x 16.3 x 29.33 in. case and is suited for large welding wire diameter operations on thick materials. FLEXible TEChnology(SM) lets welders use various processes - stick, Touch Start TIG-® (DC), MIG, flux-cored CV submerged arc, and arc gouging - on numerous applications,...

Read More »
Gas-Shielded Flux-Cored Wire offers low hydrogen weld deposits.

Gas-Shielded Flux-Cored Wire offers low hydrogen weld deposits.

Designed for optimal weld quality on offshore drilling rig applications and jack-up rig fabrication, FabCO-® 712M welding wire has less than 4 ml diffusible hydrogen per 100 g of weldment. This decreases chance of underbead cracking and can lessen requisite preheating, while degree of moisture pickup minimizes chance of hydrogen entering weld after exposure to atmosphere. Supplied in 0.045 and...

Read More »
Let Our Safety Experts Lower Your Risk
Sponsored

Let Our Safety Experts Lower Your Risk

Elite Technical Services provides your company with qualified and experienced safety experts. Specializing in confined space and high-angle technical rescue and jobsite hazard assessment, your workplace safety is the top priority. Check out the video to learn more.

Read More »

All Topics