Lee HI-BAR® In-Line Wash Flow Safety Screens Take Filtration to a Higher Level
Screens

Lee HI-BAR® In-Line Wash Flow Safety Screens Take Filtration to a Higher Level

The Challenge Protecting components from contamination is essential in critical fluid control applications, such as those found in the aerospace, power generation and automotive industries. While many systems are designed to be relatively immune to low levels of small size contaminants, single larger rogue particles can cause blockages which could result in system failure and downtime. The...

Read More »
Oval-Q Air Welder comes with 1650 W heat element.
Welders

Oval-Q Air Welder comes with 1650 W heat element.

Oval-Q Air Welder is suitable for welding thermo-plastics, roofing materials, textiles, pond liners, tarpaulin and banner materials. Unit is equipped with optimally balanced motor and twin turbine system that delivers 240 L/minute airflow. Welder can be used for plastic repair of bins, bumpers and totes with welding rod. Product features oval shaped design and easily cleanable air filters and...

Read More »
Li'l Runner Welding Carriage now features battery powered option.
Welders

Li'l Runner Welding Carriage now features battery powered option.

Equipped with a 14.4V lithium ion battery, the Battery Powered Li’l Runner Welding Carriage combines portability with high-quality welds. The unit weighs just over 17 pounds (8 kg) and produces quality welds with consistency and precision. Featuring a cast aluminum housing and 4-wheel planetary gear drive system, the Battery Powered Li’l Runner can be used anywhere line voltage is not...

Read More »
Twin-PT Contact Inserts feature modular insert design.
Inserts

Twin-PT Contact Inserts feature modular insert design.

Available with fixed number of positions and push-in termination option, Twin-PT Contact Inserts are compatible with common transmission lines. Suitable for standard housing types, box-mounting bases and EVO double-outlet plug housings applications, units enable two conductors to be wired in one contact point.

Read More »
Safer and More Efficient Welding with MultiStrike®
Welders

Safer and More Efficient Welding with MultiStrike®

Many welders today are still using 2% red-tipped thoriated Tungsten Electrodes, which contain radiotoxic thoria and therefore can be dangerous to health of those exposed to it, especially in the dust format from grinding the tips. To overcome the accumulated hazardous thoria conditions, whilst maintaining a very high life expectancy for the Tungsten Electrode, blue-tipped MultiStrike® Tungsten...

Read More »
PCBN Insert Grades utilize bimodal substrate.
Inserts

PCBN Insert Grades utilize bimodal substrate.

Designed for turning hardened steels, PCBN Insert Grades are available in CH0550, CBN060K, CH2540 and CH3515 models. Integrated with advanced coatings, unit comes in ISO insert geometries in metric and imperial specifications. Product comes with optional feed wiper geometry.

Read More »
300 KW High Frequency Solid State Welder
Welders

300 KW High Frequency Solid State Welder

Schedule a Visit to Perrysburg, Ohio to inspect this welder: (419) 872-2364 Specifications: Primary Volts: 480V, 3PH, 60 Hz Primary Power: 450 KVA Output Power: 300 KW Output Frequency: 300 KHz Machine Efficiency: 82% - 85% Equipped With: Main Transformer Rectifier Cabinet Operator Cabinet Output Cabinet Heat Exchanger 200 - 800 KW Welders Available! We offer a welder maintenance and training...

Read More »
300 KW High Frequency Solid Sate Welder
Welders

300 KW High Frequency Solid Sate Welder

Equipped With: Main Transformer, Rectifier Cabinet, Operator Cabinet, Output Cabinet, Heat Exchanger Delivery: In-Stock! Year: NEW, 2017 Specifications: Primary Volts: 480V, 3PH, 60 Hz Primary Power: 450 KVA Output Power: 300 KW Output Frequency: 300 KHz Machine Efficiency: 82% - 85% Equipped With: Main Transformer Rectifier Cabinet Operator Cabinet Output Cabinet Heat Exchanger 200 - 800 KW...

Read More »
Precision Butt Welder comes with automatic control.
Welders

Precision Butt Welder comes with automatic control.

Featuring heavy duty and precision magnetic guides, BW Series Precision Butt Welder available in range from 40 to 150 KVA for up to 16mm. Designed with fully adjustable clamp, unit provides pneumatic controls. Having multiple scheduling capabilities, product comes with optional robot loading, handheld programming unit pendant and AGI Argon gas. Unit’s weld head is available at 90 or 0 degrees.

Read More »
New! Never Installed Tube & Pipe Machinery for Sale
Controls and Controllers

New! Never Installed Tube & Pipe Machinery for Sale

NEW! 3.125″ x .134″ UNIVERSAL Tube Mill Line, Stock #3462 Equipped With: KENT Double Uncoiler, KENT Shear & End Welder, KENT Horizontal Accumulator, YODER Forming Mill, Solid State HF Welder, YODER Sizing Mill, UCG Flying Cold Saw, (3) AC Motors and UCG Drive System Specifications: Max Tube O.D.: 3.125″ (79.3 mm) Min Tube O.D.: 1″ (25.4 mm) Max Round Wall: .134″ (3.40 mm) Max Shapes...

Read More »

All Topics