Hand (Tool) Clamps

Welding Clamp is rated 500 A at 60% duty cycle.

Designed to solve problem of inadequate grounding of weld arc, Ground Hog prevents current restriction by combining large copper contact point with clamping pressure, facilitating transfer of electrical current in full circuit. To further ensure complete arc, Ground Hog controls electrical current by isolating contact surface and transfer to cable connection. Clamping force is 465 lb using Strong...

Read More »
Welding Rods, Wire and Electrodes

Flux-Cored Wires deliver arc stability.

Gas-shielded, flux-cored AWS E71T-12 wires, UltraCore 712C and UltraCore 712A80, are used for mild steel welding. Suitable for tank and shipbuilding applications, UltraCore AWS E71T-12 wires exhibit high impact values regardless of notch location in weld joint. T-12 wires are tri-classified meeting AWS T-9 and T-1 requirements and suited to deliver impacts for low temperature or fracture critical...

Read More »
Welders

Welder suits light industrial applications.

Syncrowave® 200 AC/DC TIG/Stick welder provides 5-200 A output power (150 A at 40-percent duty cycle), enough to weld -¼-in. aluminum with ac TIG. Single-knob adjustment controls pulse rate from 1-15 pulses/sec, and Syncro-Start(TM) technology allows operators to choose soft, standard, or hot starting, depending on material thickness and tungsten diameter. Syncrowave 200 comes with Weldcraft®...

Read More »
Noise Control Solutions for Standby Power Generators
Sponsored

Noise Control Solutions for Standby Power Generators

This paper examines effective noise control solutions for standby power generators, while describing the step-by-step approach to develop noise, thermal, and other improvements in power gen-set enclosure designs. It includes details of the materials upon which successful noise control solutions in the power generation industry are based. The factors to be considered while developing a new enclosure design, different steps in developing an effective noise control solution for existing enclosure designs, and the methods for controlling the airborne noise in a power generator are listed. Flame resistance properties of noise control materials, thermal management, environmental considerations, and material durability considerations are also explained. Also included are descriptions of 2 noise control solutions based on 2 different power generators together with graphical representations.

Read More »
Welders

Welder/Generator suits construction, pipe, and fleet work.

Powered by 4-cylinder, water-cooled, 1,800 rpm Perkins® diesel engine, Vantage® 400 provides 400 A of dc welding output, 19,000 W peak 3-phase ac generator power, and 12,000 W peak 1-phase ac auxiliary power. Housed in corrosion-resistant stainless steel case, unit includes Lincoln Chopper Technology(TM) for smooth arc, and Voltage Regulation Device(TM), which allows operator to select lower...

Read More »
Chromium-Molybdenum Electrodes weld 9Cr-1Mo alloyed steels.
Welding Rods, Wire and Electrodes

Chromium-Molybdenum Electrodes weld 9Cr-1Mo alloyed steels.

Gas-shielded, flux cored electrodes, Select 810-B8 and Select 910-B9, are all-position wires that feature uniform weld beads with good tie-in as well as smooth and stable arc transfer. Both products eliminate defects such as lack of fusion and tolerate mill scale and rust. Select 810-B8 is utilized to weld 9Cr-1Mo alloyed steels involved in high-temperature service, while Select 910-B9, which...

Read More »
Welders

Friction Welding System features servo-driven weld head.

Designed for small part joining to broad range of part configurations and dissimilar materials, Model FWS-30 provides rotational speeds from 12,000-23,400 rpm and forging forces from 335-3,125 lbf. Friction weld head can accept parts with footprint up to 30 mm. System produces forge-quality welds with little or no diffusion area. It can be designed as stand alone machine, integrated into work...

Read More »
Welders

TIG Inverters deliver 5-700 A of weld power.

Eliminating inclusions and weld flaws, Dynasty® 700 and Maxstar® 700 produce output of 500 A/40 V at 100% duty cycle and feature Auto-Line(TM) power management technology, which allows them to accept any primary power from 208-565 V, singe or 3-phase, 50/60 Hz. Dynasty 700 provides ac/dc welding output, while Maxstar provides 700 dc-only output. Units permit pulsing at dc TIG frequencies of...

Read More »
Fine Screen employs European step bar technology.
Screens

Fine Screen employs European step bar technology.

ScreenMaster® ST, constructed of stainless steel, comes in various widths, heights, and screen openings to promote optimal degree of solids separation to meet application requirements. As solids accumulate into mat on screen, level sensor is activated, and unit is energized. Motor reciprocates bars, incrementally moving material up bar screen steps. When they reach top, solids fall off into bin,...

Read More »
Welding Supplies

Torch Cleaning Station cleans robotic welders.

FS3 Torch Cleaning Station has 3-position cleaner that can clamp torch, ream nozzle, and spray in under 4 sec. During operation, robot moves welding gun into position for cleaning. Product's adjustable clamp holds nozzle in place, and reamer begins cleaning built up splatter. Once splatter is removed, mist of anti-splatter solution is applied to nozzle. Optional wire cutter can be added to trim...

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics