Fluid Transfer Sanitary Ball Valves are USDA approved.
Suited for flush-bottom, in-line, and multi-port applications, Fluid-Flow valves are offered in standard configurations, aseptic, or jacketed. Designed for sanitary market, valves consist of 1Ã-½-4 in. flush-bottom, 2-way, 3-way, and multi-port valves. Features include fully-encapsulated seals, full-port design, and sanitary No. 4 finish I.D. Valves handle temperatures to 300Ã-
Read More »Check Valve works with hydraulic and pneumatic systems.
Constructed of brass and 316 Stainless steel materials, CV3000 Series Check Valve employs contained seat/seal design that prolongs life of soft seal. Suited for use in hydraulic and pneumatic systems, unit withstands affects of shock, pulsing, and vibration. Seals can be varied for compatibility with gases and liquids. Standard sizes range from Ã-¼-2 in. NPT, and standard cracking pressure is...
Read More »Fluid Control Valve is suited for miniature applications.
KIP Jr. valve, suited for small, tight, spaces has 0.800 in. dia and weighs less than 3 oz. Characteristics include wattage of .65 W and flows up to .050 Cv. Valve is available in all 2-way and 3-way configurations with brass or stainless steel body construction and operator or manifold mount configuration. Available with pre-installed fitting and with variety of wire termination and printed...
Read More »Relief Valves offer pressure range of .5 to 10,000 psig.
Series R6000 Right Angle Relief Valves have fully encapsulated seat seal, which prevents inaccurate cracking pressures. Delta stem seal system reduces stem friction to produce accurate reseal, and raised lip on poppet prevents damage to O-ring. Valves are manufactured to meet OEM industrial application requirements.
Read More »Advantages of Thermoset Plastics vs. Engineered Thermoplastics and Metal Parts
Thermosets and engineered thermoplastics are sometimes better suited to differing situations, but they do have some overlap in relevant use cases.
Read More »Lockout Kit ensures compliance with OSHA 1910.147.
Maintenance Lockout Kit contains 17 components to ensure equipment is either de-energized or locked out. Suited for maintenance departments that do frequent lockout jobs, kit includes breaker lockouts, electrical plug lockouts, and gate valves. Additional components include AC voltage sensor that locates blown fuses, defective breakers, and neutral/live wires. Hasps provide double check system...
Read More »Three-Way Poppet Valves suit various applications.
Inline poppet valves, offered in 3-way, 2 position, solenoid and air-actuated configurations, are available in port sizes from Ã-½-2 in. NPT. Models include solenoid-actuated valves with internal air pilot, solenoid actuated valves with external air pilot supply, and valves with air actuation. Products operate with or without lubrication and offer bubble tight shut-off. Applications include...
Read More »Inert Isolation Valves tolerate particulate-laden media.
Available with molded PEEK or PPS valve bodies, WTA-2 two-way, normally closed, inert isolation valves feature PTFE isolation diaphragms and Perfluor or Viton soft seal valve seat seals that tolerate particulate-laden media. Rated for power consumption of 2.8 W, valves have orifice diameters of 1.6 or 2.0 mm and Ã-¼-28 threaded, 3 or 4 mm barb port connections.
Read More »Proportional Hydraulic Directional Valves are pilot-operated.
Spring-centered PE Series valves have symmetrical spool and provide meter-in and meter-out control. Models are available for flow rates up to 45 gpm and pressures up to 5,000 psi. Available in three cavity thread sizes, valves are offered in various 2- and 3-position, 3-way and 4-way circuit configurations. Products can be piloted by electro-proportional valves and are suited for motion control...
Read More »Ball Valves are firesafe-tested.
Firesafe Ball Valves are certified to API-607 4th edition specifications and include pre-assembled valve/actuator packaging. Three-piece Series F88 is offered in 1,500 and 2,000 psi models for line sizes from Ã-¼ to 6 in. Flanged, full-port Series FD9 Class 150 valves fit Ã-½ to 6 in. line sizes. Both have 316 stainless steel or carbon steel body. Patented 45Ã-
Read More »Check Valves operate from 0-10,000 psig with zero leakage.
Check Valves range in size from 1/8 to 2 in., in variety of connections, for both gases and liquids. Standard materials include aluminum, brass, carbon steel, 303 and 316 stainless steel bodies with Buna N, ethylene propylene, fluorosilicone, neoprene, TeflonÃ-®, and VitonÃ-® O-rings. Factory set cracking pressures are from .5-8 psig. Applications include analytical instrumentation,...
Read More »Does Your Parking Lot Make a Good First Impression?
To enhance its appearance by removing oil stains, Terminator-HSD uses micro bacteria to remove the stain without harsh chemicals, acids, or detergents. Check out the video to learn more.
Read More »