New: Buy Now on Thomas and Pay Over Time with Credit Key   Learn More

Ball Valves and Actuators suit severe duty applications.

Ball Valves and Actuators suit severe duty applications.

Trunion style ball valves and actuators are specifically designed for shut-off of liquid and gas flow up to 20,000 psi. Two 3-way and 3-way diverter ball valve configurations are available in orifices of .187 or .375 in. Valves incorporate 316 stainless steel construction, Viton 0-rings, Arlon ball seats and peek bearing washers. They have 1 1/16 in. dia hole for panel mounting. Air-operated...

Read More »
Isolation Valve operates at high pressures.

Isolation Valve operates at high pressures.

Corrosion-resistant, miniature isolation valve works in applications up to 550 psi. Inert materials of construction include PEEK, PPS, and Teflon. Options include: port configuration and orientation, voltage, electrical power, and assembly mounting onto manifolds for multiple flow-line control. Valve replaces pressure regulator systems and pressure feedback systems where upper pressure limit...

Read More »
Relief Valve works for wide pressure range.

Relief Valve works for wide pressure range.

Series 1400 fixed-blowdown safety relief valve can be used on gas compressors, separators, heater treaters, scrubbers, dehydrators, gas production units, and transmission and gathering lines in high-flow air, gas, and liquid service. It is available in flanged and threaded configurations, with inlet sizes from 1/2 to 2 in., and orifice areas of 0.059 to 0.830 sq in. It offers set pressures from 5...

Read More »
Proportional Valves create no sliding friction.

Proportional Valves create no sliding friction.

Proportional valves are offered with orifice sizes ranging from 0.032 to 0.625 in. They have 250 Hz frequency response, and some models are UL approved for hazardous locations. Performing well with high or low pressure drops, valves utilize isolation diaphragm that separates working fluid from coil and armature. Available valve material includes hard black anodized aluminum or stainless steel...

Read More »
High-Pressure Valves provide positive leak-free shut-off.

High-Pressure Valves provide positive leak-free shut-off.

Co-ax(R) valves are available for pressures up to 7,500 psi, actuation speeds of 30 msec, and in wide range of sizes, seal and construction materials. They handle high pressure applications, such as gas turbine fuel systems, cylinder filling, cryogenic pumps and vacuum furnace quench gas supply systems. Units come in 2/3- and 3/2-way versions, and in normally-opened or normally-closed...

Read More »
Directional Valve diiverts or selects flow.

Directional Valve diiverts or selects flow.

Balanced 3-way directional control valve diverts flow between 2 outlets. It is available in sizes for l/2 to 4 in. pipe, with pressure ratings from 150 to 10,000 psi. Applications include diverting positive displacement pump discharge without deadheading pump and pump unloading where 1 of 2 outlets can go to nozzles, and other can go back to reservoir. In reverse direction, it can be used to...

Read More »
Thermostatic By-pass Valve permits zone control.

Thermostatic By-pass Valve permits zone control.

Three-way valve is designed for new or retrofit fin-tube baseboard installations that use non-electric thermostat. It comes with compression fittings for 3/4 in. copper tube, and is installed ahead of fin-tube in supply side, where radiation enters room. No. 320 liquid-filled thermostat provides quick response to temperature changes. From low freeze protection setting of 43-°F, it may be set in...

Read More »
Relief Valves are designed for gas or liquid applications.

Relief Valves are designed for gas or liquid applications.

High pressure relief valves protect systems or devices from over-pressure damage and failure. They are available in pressures from 1,000 to 10,000 psi, and feature stainless steel body, nylon seat and PTFE/EPDM seals. Inlet or thru ports and outlet/vent sizes are 1/4 in. FNPT. Valves have 0.70 in. dia orifice and Cv of 0.12. They are externally adjustable and can be mounted in line.

Read More »
Solenoid Valve remains open while de-energized.

Solenoid Valve remains open while de-energized.

Direct acting EASY-NO normally-open solenoid valve closes when it is switched on. Thermoplastic valve offers water and dust-tight enclosure. With no wetted metals, valve can be used for corrosive or ultra-pure liquids, and can handle pressure, drain, or vacuum applications. It does not require line pressure to aid in closing or opening, and is available in 1/4 and 1/2 in. pipe sizes. Solenoid...

Read More »
Miniature Valves meet IP 40 protection standards.

Miniature Valves meet IP 40 protection standards.

MH1 Miniature Valves feature 10mm grid design and are available for single sub-base, standard manifold, sub-D manifold, and PCB mounted manifold configurations. Series includes 10 lpm 3/2 direct-acting units, 3/2 normally open and normally closed, and 2/2 normally closed unit that provides 20 lpm flow for vacuum applications. Electrical connections include plug-in, horizontal or top connector....

Read More »

All Topics