Qoisna Offers TPE-Coated-Stem Check Valves for EtO and Gamma Sterilization
Check Valves

Qoisna Offers TPE-Coated-Stem Check Valves for EtO and Gamma Sterilization

The TPE-Coated-Stem Check Valves feature male luer lock outlet with a thermoplastic elastomer (TPE) coated stem. The unit’s stem avoids adherence of mating surfaces and improves sealing for an easy disconnection of luers. They are manufactured to ISO Class 8 Clean Room; BPA- and latex-free; REACH and RoHS standards. The valves minimize the risk of stress cracks at female luer connection.

Read More »
CFRP Injection Molded Composite Replaces Machined Aluminum in Oil Control Valve
Control Valves

CFRP Injection Molded Composite Replaces Machined Aluminum in Oil Control Valve

Metal-to-composite conversion reduces cost, weight, improves engine performance; material debuts at SPE ACCE this September Phoenix, Ariz. – An Asian automaker has replaced machined aluminum with a unique carbon fiber-reinforced composite in an injection molded oil control valve within the variable valve timing system that controls engine intake and exhaust. The high-performance thermoplastic...

Read More »
New D4 Series Mix Proof Valves Come in Downward-Opening Design
Valves

New D4 Series Mix Proof Valves Come in Downward-Opening Design

D4 Series Mix Proof Valves consist of D4 and DA4 ultra-hygienic models and are designed for separation of dissimilar products. Units come with integrated seat lift detection and a control unit. D4 model offers reliable product separation with seat lift (SL) or non-seat lift (NSL) cleanability. The valves are fully balanced for dependable operation during spikes and flow in any direction and are...

Read More »
Bonomis' New Series S250 In-line Check Valves Features Leak-free Service and Low-cracking .50-PSI Spring-loaded FKM Seat
Check Valves

Bonomis' New Series S250 In-line Check Valves Features Leak-free Service and Low-cracking .50-PSI Spring-loaded FKM Seat

Bonomi launches Series S250 Check Valves with a cold-formed 316 stainless steel body gives users the highest Cv at the lowest cost. The spring-loaded FKM seat provides high flow capacity, minimal head loss and bubble-tight protection against reverse flow. They are available in six sizes and FNPT threaded from 1/2” to 2”. The valves rate to 250 WOG with an operating temperature range of -4...

Read More »
Latest PVDF Ball Check Valves Come with Square Cut Seat
Check Valves

Latest PVDF Ball Check Valves Come with Square Cut Seat

Hayward’s TC Series PVDF Ball Check Valves come in true union design featuring threaded or IPS Sch40/80 socket fusion end connections. Units are available in sizes ranging from 1/4 to 1 in. and features FPM O-Ring seals. Suitable for vertical installations, valves are rated to 150 psi pressure at 23°C temperature and can be operated up to 115°C temperature. These valves are used in waste...

Read More »
New Super Centurion A-403 Fire Hydrant Allows Easy Seat Replacement or Traffic Repair
Gate Valves

New Super Centurion A-403 Fire Hydrant Allows Easy Seat Replacement or Traffic Repair

Mueller’s Super Centurion A-403 Fire Hydrant is available with a 5-1/4 in. main valve and a 3-way opening configuration. Unit features two-piece ductile iron upper barrel with nozzle section and fully encapsulated traffic flange, reversible main valve and automatic oil lubrication. The fire hydrant meets UL/FM/AWWA at 350psi operating pressure. New Resilient Wedge gate valve complies with...

Read More »
New Flanged Full-Port Ball Valves Feature Factory-Installed Hidden-Spring Design Handles
Ball Valves

New Flanged Full-Port Ball Valves Feature Factory-Installed Hidden-Spring Design Handles

Bonomi’s ANSI Class 150 Flanged Ball Valves are offered in 766000SRL (Stainless Steel) and 766001SRL (Carbon Steel) models in 1 to 3 in. sizes. The units come with a grounded stainless steel and blow-out proof stem, virgin PTFE seats, and Graphoil and PTFE seals. The valves feature 300 stainless steel hidden-spring design handles, fasteners, and nuts for use in harsh environments. The units are...

Read More »
New Verishot Single Valve Gate System Improves Alignment between Mold and Machine Platens
Gate Valves

New Verishot Single Valve Gate System Improves Alignment between Mold and Machine Platens

Verishot Single Valve Gate System is suitable for applications that require highly cosmetic gate finish, fast flow rates, large volume parts and dimensional accuracy. The system features FlowLoc™ threaded leak proof nozzles for optimization of control. Verishot VSG is available with high-temperature seals and adjustable valve pins and delivers flawless injection molding process. Unit is...

Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Sponsored

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics