Bypass Relief Valves feature Teflon® construction.

Bypass Relief Valves feature Teflon® construction.

Series RVT angle pattern relief valves have Teflon-® shaft and body for use with corrosive and ultra-pure liquids, and for elimination of sticking and surging. Pipe sizes range from 1/4 to 2 in. with various seal materials including Buna-N, Viton, and EPDM. Flow rates range from 2 gpm, and set pressures range from 5 to 150 psi. Valves relieve excess pressure in piping systems, as well as prevent...

Read More »
Cartridge Valves offer high flow capabilities.

Cartridge Valves offer high flow capabilities.

DSHR two-way poppet and sleeve and SE 3 three-way spool and bushing servocartridge valves provide closed-loop control. Both have servopilot valve with feedback device on mainstage. DSHR has flow rates up to 165 gpm @ 72.5 psi pressure drop, 12 ms step response time at 100% stroke, and is available in sizes NG 40, 50, 63, and 80. SE 3 has frequency response of 170 Hz at -3 dB and 12 ms step...

Read More »
Adhesive Dispense Valve makes precise deposits.

Adhesive Dispense Valve makes precise deposits.

Compact MicroDot(TM) 741MD-SS needle valve makes microdeposits as small as 0.007 in. dia. Internal needle seats in hub of dispensing tip reduces amount of dead fluid between needle seat and substrate. Pneumatically operated valve applies variety of assembly fluids including UV-cure adhesives, solvents, lubricants, and epoxies. Calibration knob allows user to restore valve stroke setting and...

Read More »

Angle Valve handles liquids, gases, and steam.

ARES pneumatically actuated on/off valve works in maximum pressure of 232 psig for most media and 150 psig in steam applications. It is available with clamp, NPT, and weld end connections from 3/8 to 2 in. Actuator has NAMUR style mounting pad, visual position indicator, and is available in spring-to-close, spring-to-open, and double acting configurations. Accessories include limit switches,...

Read More »
Jacketed Ball Valve prevents solidification and blockages.

Jacketed Ball Valve prevents solidification and blockages.

Ball Valve is suitable for use with hot water, steam, or other appropriate heating or cooling mediums. Custom-jacketed, flush-bottom, 2-way, and multi-port divert valve is available in sizes from 1 1/2 to 4 in. Full-flow port valve is designed for corrosion-resistant, highly sanitary applications. Valve can be automated, is USDA approved, and meets 3A specifications.

Read More »

Oscillating Valve has electric actuator.

Valve allows user to control reciprocating motion and stroke frequency of cylinder with electrical signal. Outlet ports of valve are alternately supplied with air for as long as electrical signal is present at solenoid coil. When electrical signal is interrupted, cylinder completes its cycle and returns to its home position. Complete 1/4 power valve, with a Cv of 1.3. Many standard voltages...

Read More »
Butterfly Valves suit HVAC and industrial applications.

Butterfly Valves suit HVAC and industrial applications.

Series 125WB/LB Butterfly Valves are available in 2 through 48 in. sizes with wafer or lug body design. With 200 psig pressure rating (2 to 12 in. sizes) and 150 psig pressure rating (14 to 48 in. sizes), valves are suitable for applications wherever positive shut-off is required for liquids, gases, or slurries. Constructed with cast iron bodies and stainless steel shafts, valves are designed for...

Read More »
Ball Valve features 3 or 4 way body port configuration.

Ball Valve features 3 or 4 way body port configuration.

3L/T2Q33 Series is suitable for diverting, blending, or mixing applications. It is available in carbon or stainless steel in sizes from 3/8 to 1 1/2 in. Heavy-duty center section can be furnished with bolted-on screwed ends for valve rated to Class 400; with flanged ends for either Class 150 or Class 300 valve; or with bolted-on socket or butt weld ends. All body gaskets are PTFE, and it has 4...

Read More »

All Topics