Tools

Utility Cable Pullers

Cable Pulling Tool affords protection and aids installation.

Pre-assembledÂ- and reusable, DR-SOCK facilitates and accelerates installations requiring cables and connectors. Product protects cables and connectors from being damaged by taking stress off connection points while pulling through conduit. Opening up to 1.25 in., design features bright colored sleeve tips to foster identification as well as steel ring that allows positive attachment...

Read More »
Battery Powered Heat Gun and Soldering Iron Kit for Battle Damage Repair Has Been Approved by Army Avionics
Heat Guns

Battery Powered Heat Gun and Soldering Iron Kit for Battle Damage Repair Has Been Approved by Army Avionics

United States Army Avionics has recently approved the Malcom Company MCH-100-A, Battery Powered Portable Heat Gun, for their new Battle Damage Assessment Repair Kit.Â-  The portable battery powered electric heat gun MCH-100-A, manufactured by Malcom Company of Portsmouth, Rhode Island, features a light weight battery powered self contained heat gun, battery powered soldering iron, power...

Read More »
Diamonds

CVD Diamond Tool Outperforms PCD Tool by 50%-560% in Tool Life

CVD is 100% pure diamond with fine grains in micron sizes, its grain boundaries are 100% diamond as well. PCD is ~90% diamond powers sintered with binding metal powders such as cobalt & nickel. As a result, PCD tools usually fail from binding phase since they are less strong than diamond. CVD-diamond tool also offers great cutting edge integrity without any micro damage which happens often in PCD...

Read More »
Battery Powered Hot Iron suits hot melt applications in field.
Soldering Irons

Battery Powered Hot Iron suits hot melt applications in field.

Running on 48 Vdc, 180 W Model MCH-100-HM can reach temperatures up to 900°F. Portable tool features internal thermocouple that protrudes into brass tip which feeds back to Watlow temperature controller. Programmable controller allows operator to set upper and lower temperatures, adjust temperatures as needed, and set alarms. Designed to military standards, tool is suited for soldering,...

Read More »
Professional Punchdown Tool has rugged design, ergonomic grip.
Tools

Professional Punchdown Tool has rugged design, ergonomic grip.

Intended for telecom/datacom installers working with 110, 66, Krone, and BIX™ style cross connects, PRO-Strike Punchdown Tool (P/N 13150C) terminates and cuts Cat3/5/5e/6 cables. Spring loaded tool will not damage sensitive circuitry and has bayonet style blade retention socket compatible with industry-standard tools and blades; built-in hook for wire feeding/removal; and multi-use spudger. Low...

Read More »
Tools

Cleco® H-Series Shut-off and Non Shut-off Pulse Tools

OVERVIEW Effective March 29, 2013 all H series shut-off and non shut-off pulse tools will be released for consumption. On March 1, 2013 the Cleco® D-Series (11-120Nm) shut-off pulse tools and the CSeries (7-105Nm) non shut-off pulse tools were discontinued. There are still a few discontinued D series tools that are available and have been placed in our excess inventory program. Please check...

Read More »
Carbide Inserts suit cast iron turning applications.
Cutting Tool Inserts

Carbide Inserts suit cast iron turning applications.

While AC405K grade offers wear and deformation resistance for finishing grey cast iron at continuous high speeds, general-purpose AC415K grade provides stable turning in range of grey and ductile cast iron applications. When performing interrupted or unstable turning, AC420K grade features fracture resistance that promotes stability. Each grade in AC400K Series utilizes EGZ chipbreaker for...

Read More »
Clamping System, PCBN Grades enable efficient cast iron machining.
Clamping Systems

Clamping System, PCBN Grades enable efficient cast iron machining.

Beyond Shield™ has 3-point, carbide-clad clamp that exhibits wear resistanceÂ- against chip flow and applies clamping force toward front of insert to reduce vibrations that can lead to cracking/failure. With this rigid clamping system, smaller IC PCBN (polycrystalline cubic boron nitride) inserts can perform well in same applications as larger IC inserts. Available...

Read More »
Ratcheting Hand Tool cuts, strips, and crimps cables.
Hand Crimpers

Ratcheting Hand Tool cuts, strips, and crimps cables.

As all-in-one tool for cable preparation and connection, VDV Compact Ratcheting Modular Crimper (Catalog No. VDV226-107) cuts, strips, and crimps data and voice cables. Direct lateral crimp action and heavy-duty ratchet ensure even, precise, and complete termination on every cycle, promoting dependable connections. While heavy-duty ratchet ensures complete termination by executing full...

Read More »
Heat Treatment Equipment

Ambrell to Exhibit at Heat Treat 2013

Induction heating and automation demonstrations will be available at booth 2102 during the premier heat treating tradeshow Scottsville, NY — Ambrell will exhibit at Heat Treat 2013 on September 17-18, held at the Indiana Convention Center in Indianapolis, IN. At the event, robotics from Nutek Industrial Systems will be shown - a tube will be heated by an EASYHEAT induction heating system and...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers