Tools

Tools

Grabber® Revolutionizes Drywall Installation Again with the PanelMax PortaMill(TM)

New Handheld Tool Enables Installer to Create a Recessed Edge on Any Sheet of Drywall or Cement Board Highland, UT — Grabber® Construction Products, an international manufacturer and distributor of professional-grade fasteners and construction products, introduces PortaMill™, a revolutionary handheld tool that creates a recessed edge to enable a stronger, flatter joint in the finished...

Read More »
Gas / Chemical Analyzers

HVAC Brain Inc. Carries Wide Variety of Instruments and Tools for HVAC Professionals

HVAC Brain, Inc. has expanded their product offering to include a wide variety of quality instruments and tools for use by HVAC professionals. The entire expanded offering of instruments and tools can be found online at www.hvacbrain.com. Cleveland, OHÂ- – HVAC Brain, Inc. (www.hvacbrain.com), retailer of HVAC/R equipment and replacement parts, has expanded their online instruments and...

Read More »
CBN Grade supports high-speed finishing of cast iron.
Cutting Tool Inserts

CBN Grade supports high-speed finishing of cast iron.

Possessing densely sintered CBN particles, BN7000 Grade offers high wear and breakage resistance, ensuring stable performance and extended tool life in machining of cast iron. Product also offers wear and thermal crack resistance in high-speed machining of grey cast iron. In addition to standard edge preparation, BN7500 is available in LF (sharper) and HS (stronger) versions.

Read More »
Welding End Prep Tool Designed for Highly Repetitive Milling
Material Handling Clamps

Welding End Prep Tool Designed for Highly Repetitive Milling

A portable welding end prep tool that features air-operated clamping which reduces cycle times for highly repetitive end prep milling in fabrication shops is available from ESCO Tool of Holliston, Massachusetts. The MILLHOG® Mongoose Air Clamp™ Welding End Prep Tool is equipped with an air-operated clamp that attaches to a tube or pipe I.D. and releases from it by simply flipping a toggle...

Read More »
Adhesive Tapes

Klein® Tools Wins Five 2013 Pro Tool Innovation Awards

Klein Tools, (http://www.kleintools.com) for professionals since 1857, announced five of its products won the 2013 Pro Tool Innovation Awards. Pro Tools Review editors set out to determine which tools, accessories and fasteners were the best, most innovative tools for 2013. Over 40 manufacturers submitted entries in nine categories. The Klein Tools product winners include the MM500 Auto Ranging...

Read More »
EMAG at South-Tec 2013
Machining Centers

EMAG at South-Tec 2013

Forecasted growth rates of 6.3% in sales of automobiles in the USA clearly demonstrate one thing: that the USA is and will remain one of the most important trading partners for Germany and German industry. The USA is traditionally an important market for EMAG, a leading machine tool builder in Germany. This is emphasized by the fact that EMAG has been present in Farmington Hills, Michigan, for...

Read More »
Hand Held Drills

Panasonic Expands Its Lineup of "Tough IP" Cordless Power Tools with Two New Models

New Li-Ion cordless power tools debuts at ASSEMBLY Show 2013 NEWARK, N.J. -- Panasonic will announce the introduction of two new Li-Ion cordless power tools to its Tough IP(TM) professional-grade product offering at the ASSEMBLY Show 2013. Featuring dust and water resistant technology, the power tools have received an IP56 under international standards administered by the International Electro...

Read More »
Tools

Cordless Clutch Tools support manufacturing assembly process.

Powered by 2.0 Ah battery pack or 4.2 Ah Lithium Nickel batteries, EYFGA Series comprises 3 models with error proofing capability and 3 with operator OK/NOK indications, both visual and audible. Programmable features include adjustable rundown speeds, cross thread reduction, cross thread/rehit detection, and programmable maintenance intervals. To prevent over or under torqued fasteners, tools are...

Read More »
End Mills

Chipbreakers handle exotics and stainless steel alloys.

General-purpose EEG, intendedÂ- for roughing applications, features ball-shaped projection breakers. Two-step cutting edge at front reduces crater wear and produces optimal surface finish when machining exotics and stainless steel alloys. Wear resistance and chip control help reduce lead-time and increase productivity. Also available, EEF is designed for chip control during...

Read More »
Deburring/Chamfering Tools are designed for plastic pipes.
Deburring Tools

Deburring/Chamfering Tools are designed for plastic pipes.

DEB1 tools deburr and chamfer PVC, CPVC, ABS, PE, and PP pipe up to 2 in. dia to manufacturers' standards within seconds, and solvent spreads evenly as chamfered pipe is joined. Options are available for iron pipe size (DEB1IPS), copper tube size (DEB1CTS), or metric up to 32 mm. Deburring tools, designed with internal pipe guides and knurled grip for slip-resistance, also feature blades that...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers