Cordless Drill/Driver operates from 9.6 V power.
Along with compact design that promotes access to tight spaces, 9.6 V model DC750KA incorporates 15-position clutch and 3/8 in. capacity, single sleeve ratcheting chuck that helps prevent bits from slipping. Ergonomic unit weighs 3.4 lb and has anti-slip rubber grip that lends to comfort and control. Product also offers dual speed ranges of 0-300 rpm and 0-1,100 rpm.
Read More »Rotary Hammer has compact, lightweight design.
Weighing 9.6 lb and measuring 12 in. long, Model 0756-22 cordless 1 in. SDS Rotary Hammer employs 28 V reversible motor that delivers 4,700 bpm and 2.1 ft-lb of impact energy. Rotary Hammer has 1 in. solid bit drilling capacity in concrete and optimal concrete drilling range of 3/16 to Ã-¾ in. Kit includes two V28 batteries with built-in fuel gauge, 1 hr charger with pass-through plug, side...
Read More »
IMTS 2006, BOOTH #6024 --- EBway Corporation --- GRIPflow Stamping Process
EBway Corporation, a licensee of the GRIPflow Stamping Process and a leader of stamping technology for the past 45 years, is located in Fort Lauderdale, Florida. GRIPflow is a U.S.A. developed stamping process that is an economical alternative to fineblanking and can obsolete many secondary machining operations, such as: drilling, reaming, countersinking, counter-boring, broaching, shaving,...
Read More »Expanded Kit Offering for Quick-Change Hole Cutters Debuts @ `06 IMTS
Hougen Manufacturing produces four models of low and ultra-low profile portable magnetic drills that take advantage of cutting holes with the company's RotaLoc(TM) and the RotaLoc Plus(TM) Annular Cutters featuring the Quick-Shank mounting design for fast, tool-less change outs. Hougen offers an Arbor Adapter Assembly with the quick-release change feature that adapts the spindles of their other...
Read More »
A Solutions Provider
This white paper provides an overview of filtration and energy solutions.
Read More »
Angle Heads suit high performance machining centers.
Available in straight and offset units with internal/external coolant, AngleHeads feature precise bearing technology, lifetime lubrication, and labyrinth seals to protect bearings from dirt and coolant penetration. Concentricity and facing accuracy is less than 5 Ã-µ, and internal coolant supply is up to 70 bar. Units are offered in single- or multi-spindle types, as well as quick-change...
Read More »
Reamers allow insert change without disassembly.
Available in .468-3.960 in. diameters for reaming holes with diameters of 1.72-3.96 in., Urma CircoTec RX Reamers utilize cutting inserts with multiple cutting edges for delivering repeatability of under 4 microns in run-out. Reamers feature adjustable tool length, and are available in straight shank and Beta ModulÃ-® systems. Carbide or cermet inserts are available in uncoated and coated...
Read More »Cogsdill Will Exhibit Hole-Finishing Tools at IMTS 2006
CAMDEN, SOUTH CAROLINA (April 18, 2006)Cogsdill Tool Products, Inc. will exhibit their complete line of hole-finishing tools at IMTS 2006 in booth #E-2013. Products on display will include burnishing tools and machines; mechanical hole-deburring tools; Shefcut precision reaming and boring tools; brazed diamond reaming and boring tools; automatic recessing tools, generating heads, and precision...
Read More »Dorian Tool International Has Developed the Most Technologically Advanced Turning Tool System in The Industry, The Jet-Stream(TM)
The Jet-Stream(TM), High-Pressure Air or Liquid Coolant Thru tool holder and boring bar system will be exhibited at the IMTS conference from September 6-13,2006 McCormick Place, Chicago, IL USA. Dorian Tool will be located at Booth E-2873. The concept of the Jet-Stream(TM) tool holder is to provide the ability to turn inserts at higher speeds and feeds. With advanced technologies and significant...
Read More »
Impact Driver and Wrench have 2-speed, cordless design.
Offering respective torque ratings of 1,155 and 1,290 lb-in., SID 121-A and SIW 121-A cordless impact driver and impact wrench feature dual spindle bearings and drop-resistant casing made from glass fiber composite. Triple LED system illuminates work area without shadows, and 2 digitally controlled speeds promote screw fastening performance. Products, available with 3.0 Ah NiMH or 2.0 Ah NiCd...
Read More »
Grinding Workpieces Hardened up to 63 HRC with High Performance Face Drivers and Live Centers
Grinding with Tecnologie FRB face drivers and live centers has many advantages. The most important is that you can obtain a substantial reduction in machining time, which in some cases is over 50% compared to a conventional grinding operation with chuck, driving dogs or collets. Thanks to a face driver it is possible to machine the entire workpiece in a single clamping as the face driver do not...
Read More »
Dodge® Raptor Coupling Now Available in Three Larger Sizes
The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.
Read More »
