Tools

Terminal Crimping Tool combines durability and versatility.
Crimping Machinery

Terminal Crimping Tool combines durability and versatility.

Able to crimp insulated terminals to 10 AWG and non-insulated terminals to 8 AWG, 9-Inch Ergo Crimp Tool (p/n 16500) features straight plate lower jaw assembly that eliminates critical structural stress pointsÂ- to prevent breakage under heavy stress. Various crimp dies are available for CATV F,BNC, TNC, SMB, SMA, and N series coaxial connectors, and tool also accepts crimp die sets...

Read More »
Tools

Right Angle Grinders deliver maximum material removal.

Available in 1.6 hp and 2.2 hp motor options, respectively, Cleco® 1660 and 2260 Angle Grinders are compatible with industry standard depressed center wheel and cut-off abrasives, including 4, 4.5, 5, 6, and 7 in. Units feature streamlined angle head and all metal housing for ruggedness in abusive environments. Dual auxiliary handle positions, reversible throttle handle, and interchangeable...

Read More »
Compound Miter Saw features 10 in. carbide-tipped blade.
Tools

Compound Miter Saw features 10 in. carbide-tipped blade.

Powered by direct drive 13 A motor with soft start and no load speed of 4,300 rpm, Model LS1018 is suited for applications ranging from fine woodworking and carpentry to general construction. Saw miters 0–47° left and 0–60° right, with positive stops at 0, 15, 22.5, 31.6, and 45° (left and right). At 90°, Model LS1018 has 12 in. crosscutting capacity, with 8Â-½...

Read More »
Shaping Attachment machines complex features in one step.
Shapers

Shaping Attachment machines complex features in one step.

EPPINGER Shaping Attachment enables single-step machining of difficult-to-cut features, including grooves, Torx screw heads, splines, and gear teeth. Attachment drives cutter into workpiece in Z-axis at cutting speeds up to 1,000 strokes/min. At end of each stroke, integrated lift-off mechanism returns cutter to starting position without drag. With working stroke of 1.3 in. and max feed of 0.006...

Read More »
Peristaltic Pump Vs. i-FILL® Technology
Sponsored

Peristaltic Pump Vs. i-FILL® Technology

Intellitech's advanced i-FILL® pumps are used by companies working in some of the world's most demanding sectors, delivering innovative, highly accurate and repeatable results, ensuring ultimate reliability and ease of use for all of our clients.

Read More »
Drilling Machinery

DTH Hammers and Bits are designed for down-the-hole drilling.

Designed to increase productivity in reverse circulation (RC) drilling and conventional down-the-hole (DTH) drilling, BLH™ series includes valved BLH5 and BLH3 hammers as well as valve-less BLH1. Bits are available to support all BLH hammers. BLH5 delivers balanced operation with minimized vibration as well as optimized productivity in various ground conditions, and BLH3 adds steel valve...

Read More »
Metcal Receives an SMT China Vision Award for Its HCT2-120 Hot Air Pencil
Tools

Metcal Receives an SMT China Vision Award for Its HCT2-120 Hot Air Pencil

GARDEN GROVE, CA -- Metcal today announced that it has been awarded a 2014 SMT China Vision Award in the category of Rework Repair for its HCT2-120 Hot Air Pencil. The award was presented to the company during an April 23, 2014 ceremony at the Shanghai World Expo Exhibition Convention Center during NEPCON China. “We are thrilled that the product has been recognized by this award,” commented...

Read More »
Wire Cutter prevents cut pieces from getting lost.
Rope / Cable / Wire Cutters and Cutting Machinery

Wire Cutter prevents cut pieces from getting lost.

Suited for jewelry making, Model 9100F Oval Head Wire Cutter employs bypass cutting to produce clean, square cut. Built-in retainer promotes convenience as well as safety while also preventing cut wire from flying around work area and getting lost. Designed for soft wire up to 16 AWG, flush cutter can be held in either hand, is made from alloy steel with cutting edges hardened to RC 58-60, and...

Read More »
Ersa to Bring Intelligent i-CON Series to SMTA Atlanta 18th Annual Expo
Soldering Irons

Ersa to Bring Intelligent i-CON Series to SMTA Atlanta 18th Annual Expo

Plymouth, WIÂ- – Kurtz Ersa North America, a leading supplier of electronics production equipment, announces that it will exhibit the i-CON Series Solder Stations at the SMTA Atlanta 18th Annual Expo Tech Forum, scheduled to take place Wednesday, May 7, 2014 at the Gwinnett Civic Center in Duluth, GA. Today's soldering operators are faced with ever-increasing challenges, including...

Read More »
Count On Tools Inc. Saw Great Success at the IPC APEX EXPO
Materials Feeders

Count On Tools Inc. Saw Great Success at the IPC APEX EXPO

GAINESVILLE, GAÂ- – Count On Tools Inc. (COT), a leading provider of precision components and SMT spare parts, received great customer feedback at the recent IPC APEX EXPO. The company had many quality leads from new prospective customers with special interest in the StripFeeder .mod Version 2 system after the Circuits Assembly award ceremony on the opening day of the show. COT received an...

Read More »
Metcal to Demonstrate Updated Rework Product Family NEPCON China
Soldering Machinery

Metcal to Demonstrate Updated Rework Product Family NEPCON China

GARDEN GROVE, CAÂ- – Metcal today announced that it will exhibit in Booth #B-1E25 at NEPCON China 2014, scheduled to take place April 23-25, 2014 at the Shanghai World EXPO Exhibition & Convention Center. The new MX-500 Soldering and Rework System, HCT2-120 Hot Air Pencil and new features on the Scorpion will be demonstrated. Metcal’s updated MX-500 Soldering and Rework System builds on...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers