Tools

Screwdriver Kit affords versatility via 22-in-1 functionality.
Screwdriver Insert Bits

Screwdriver Kit affords versatility via 22-in-1 functionality.

Intended for use byÂ- security professionals, 22-in-1 Security Screwdriver Kit (Part No. 19105) features handle with non-slip, comfort grip and shaft design that reaches screws recessed up to 5 in. deep. There are 11 double-ended shaft-style bits, which include multiple sizes of security Torx®, hex, and Robertson along with spanners and tri-wings;...

Read More »
Corded, 1 in. Rotary Hammers are suited for overhead drilling.
Electric Hammers

Corded, 1 in. Rotary Hammers are suited for overhead drilling.

To increase accuracy, model HR2611F, and model HR2621 feature Anti-Vibration Technology (AVT®) internal counterbalance system. Both models deliver 2.1 lb-ft impact energy and offer 3 selectable modes ofÂ- operation: rotation only, hammering with rotation, or chipping only. Other features include sequential impact timing, variable speed trigger, and 40 bit angle settings. While HR2621...

Read More »
Impact Punchdown Tool utilizes 2-step process.
Tools

Impact Punchdown Tool utilizes 2-step process.

Made specifically for cable installation and maintenance of 110 and 66 panels, cross-connect systems, and wall-jacks, Cushion-Grip Impact Punchdown Tool and Blade ensure precise wire insertion and trim each time. Tool incorporates Hi/Low impact settings for adjustable compression force, inherently long shaft for reaching into narrow/crowded blocks, and Dura-Blade™ punchdown blade with Metal...

Read More »
Solid Carbide Drill is designed for holemaking in aluminum.
End Mills

Solid Carbide Drill is designed for holemaking in aluminum.

Along with 135° drill point, HPS solid-carbide drill features Beyond™ KN15™ carbide grade with polished surface that reduces friction on flutes, margins, and cutting edges. This promotes chip evacuation, even in minimum-quantity lubrication (MQL) processes. While sharp cutting edges lower cutting forces and extend tool life, spiral flute design accelerates chip evacuation. Diameters...

Read More »
End Mills

Face Milling Platform addresses cast iron, steel challenges.

Featuring double-sided insert design withÂ- 8 cutting edges, KSSM8+™ maximizes metal-cutting performance in cast irons and steel workpieces. Respectively, IC10 and IC 12.7 sizes provide 0.354 and 0.236 in. depth of cut and lead angles of 88° and 87°; suitable applications include those where fixture limitations or part designs call for close to 90° shoulders....

Read More »
Medium Roughing Inserts cut stainless steels.
End Mills

Medium Roughing Inserts cut stainless steels.

Suitable for wide range of workpiece materials, but optimized for stainless steels, Beyond™ MR Inserts feature unique geometry that maximizes smooth cutting and chip flow. Geometry of chip step is designed in continuous curve so that alternating stresses are reduced and uniform chip forming occurs. High positive rake angle works with smoothly curved cutting edge to reduce cutting forces. In...

Read More »
Solid-Carbide Drill cuts through CFRP-titanium stacks.
Drill Bits

Solid-Carbide Drill cuts through CFRP-titanium stacks.

Operating with through-coolant or without, B55_DAL drills CFRP-metal stacks in hole diameters of 3/16–5/8 in. Double-angle point design provides optimized centering, while sharp edge cleanly cuts composite fiber-reinforced polymers in top layer and exits titanium or aluminum side without burrs. For optimized chip evacuation, fine-grain solid-carbide Beyond™ KN15™ grade is highly polished....

Read More »
The MelmatCase(TM)
Instrument / Tool / Equipment Cases

The MelmatCase(TM)

Huntington Beach, CA – Melmat is modernizing the case industry with the release of their new MelmatCase™, a custom designed plastic case for the storage of precision tools, test equipment, lenses, gauges and other valuable items.Â- Ã‚  The MelmatCase™ is specifically engineered as a superior replacement for the wood gauge boxes of the past.   As a new version of...

Read More »
Batch Selective Soldering System offers operational flexibility.
Placement Equipment

Batch Selective Soldering System offers operational flexibility.

Able to be configured withÂ- single nozzle or 2 nozzles, CUBE.460 offers batch platform with flexibility for through-hole applications. Selective mini-wave soldering system supports exchangeable solder pot for dual alloys and comes with various features: heated nitrogen at soldering nozzle; 0° and 7° soldering to accommodate various types of nozzles, including...

Read More »
Exporting the BIG Kaiser Model to Europe
Boring Machinery

Exporting the BIG Kaiser Model to Europe

Hoffman Estates, IL – After more than 30 years of mutual growth and a positive relationship, BIG Daishowa Seiki Co. Ltd. (Osaka, Japan) and KAISER Precision Tooling Ltd. (RÃ-¼mlang, Switzerland) solidified their longtime partnership in the European and Asian markets. BIG Daishowa is the world's largest collet chuck producer, and KAISER is a global leader in modular boring and other tooling...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers