Rotary Switches can be washed and mounted on PCB.

Rotary Switches can be washed and mounted on PCB.

MR Series miniature low-profile rotaries are available with single, double and 4 poles. All models have adjustable stopper settings, break-before-make contacts, molded-in and epoxy sealed terminals, and interior housing seal for washability. Positive detent mechanism provides crisp feel and audible feedback. Shaft-actuated models have rubber washer and double-flatted bushing to create front panel...

Read More »
Pushbutton Switches are sealed for harsh environments.

Pushbutton Switches are sealed for harsh environments.

Miniature, panel-sealed Series 57 devices carry IP67 immersion rating, are made of velour chrome-plated zinc alloy, and have gold-plated palladium-nickel contacts and gold-plated brass terminals. Momentary-action switches are rated from 400 mA at 32 Vac to 125 mA at 125 Vac. They are available with round buttons and bezels, LED status illumination, and in red and green LED colors. Switches are...

Read More »
Video Switch suits CCTV security monitoring.

Video Switch suits CCTV security monitoring.

Model 8508 8-channel video switch allows pushbutton selection of video from up to 8 sources. Signals from remotely located CCTV cameras are selected for viewing by high impedance video monitor at midpoint of security network or by low impedance video monitor at network's endpoint. All connections are made at rear panel of switch via BNC connectors. Maximum EMI/RFI shielding is attained by...

Read More »
Capacitor Switch provides 100,000 operations.

Capacitor Switch provides 100,000 operations.

VerSaVac(TM) II LE pole top capacitor switch has long life solenoid operating mechanism that operates as low as 80 Vac. No oil or gas is used for interruption or insulation. Switch can be used to replace existing oil switches or used with new capacitor banks. VerSaVac II LE can also be used in conjunction with Zero Voltage Closing Control, which mitigates transients associated with bringing...

Read More »
Distillation 101: A Guide to Distillation and Separation Technologies
Sponsored

Distillation 101: A Guide to Distillation and Separation Technologies

Distillation is a separation unit operation that involves multiple countercurrent-stage steps, separating two or more volatile components. This results in the contact of liquid and vapor most generally in counterflow. Distillation 101: A Guide to Distillation and Separation Technologies provides an in-depth look at everything you need to know about distillation, including: Design procedures Equipment components Applications

Read More »
Ethernet Switches fit on DIN rail.

Ethernet Switches fit on DIN rail.

Compact MICE Ethernet/Fast Ethernet switches are compatible with 10BASE-T, 10BASE-FL, 100BASE-TX and 100BASE-FX, and accommodate twisted pair, single mode or multimode fiber optic connections. Switches support SNMP management, web-based management, port mirroring, port security, remote monitoring (RMON), bootstrap protocol (BootP), Dynamic Host Configuration Protocol (DHCP), and company's HIPER...

Read More »
Air Pilot Switches can be used for N/O or N/C operation.

Air Pilot Switches can be used for N/O or N/C operation.

MAXIMATORÂ-® adjustable air pilot switches control pneumatic signal to air pilot lines, and can be used as on/off devices for air operated actuators, pilot operated valves, air driven pumps, amplifiers, and gas boosters. They are available in pressures from 145 to 14,500 psi, and offer aluminum alloy bodies, 440-B piston, T46 Turcon seal, and Buna-N O-ring. Connections include 1/4 in. FNPT...

Read More »

Transport Switch works with optical networking systems.

Model 6350 Synchronous Digital Hierarchy (SDH) scalable transport switch helps network operators build metro optical networks and manage their backbone traffic in metro and regional networks. 6350 flexible and adaptive multi-service platform delivers voice services from 2 Mbps and higher, leased line services, and Ethernet. One rack of equipment can handle more than 1,000,000 simultaneous phone...

Read More »

Hubs and Switches target industrial control rooms.

Magnum Ethernet hubs and switches have built-in fiber ports, which provide noise immunity and grounding protection for noisy environments, as well as future protection with fiber cabling that can support gigabit network speeds. 10 Mb, 100 Mb, and 10/100 Mb units are designed for tight spaces. 10/100 Mb hubs and switches offer auto-selecting dual mode capability on copper ports, allowing them to...

Read More »
Liquid Flow Switch has PP/Rytron-® or PVDC construction.

Liquid Flow Switch has PP/Rytron-® or PVDC construction.

Model FT10 Thermo-Flo(TM) offers adjustable switch setpoints from 0.04 to 3 fps. LED indicates flow or no-flow status, and relay or FET output provides secure interface with remote devices. Two probe lengths, one for pipe sizes from 1/2 to 1 1/2 in., and one for 2 in. and up, are available. Thermal dispersion flow switch measures liquid temperature to determine changes in flow velocity, and is...

Read More »
Industrial Switches are available in 5 types.

Industrial Switches are available in 5 types.

Detent-Action Switches, for 5-30 amps at 600 volts, provide up to 16 positions and 75 poles. Snap-Action Switches, for 20-200 amps at 600 volts, provide up to 4 positions and 12 poles. Cam-Action Switches, for 25-800 amps at 600 volts, provide up to 12 positions and 24 poles. Tap Switches have dual (continuous/intermittent) ratings ranging from 100-2400 amps, and are available in 1-, 2-, or...

Read More »

All Topics