New Switches Products

Emergency Stop Pushbutton has large, red actuator.

A01 Series is available with 1.575 or 0.945 in. dia red actuator button with white engraved arrows. If problem occurs, operator pushes button and power shuts down instantly, breaking 2 pairs of switch contacts. Double break opens both sides of power line for safety. To re-establish power to machine, switch button is rotated in direction of engraved arrows, which reconnects switch contacts and...

Level/Flow Switches have intrinsically safe design.

With 2-wire 4-20mA loop power electronics, NuTec(TM) LS2000 insertion level switch is designed for service in nearly all fluid wet/dry applications. Level accuracy is 1/8 in. from flow element centerline. Unit can be top or side-mounted. FS2000L in-line flow switch/monitor is designed for high purity and sanitary environments. It features setpoint range of 0 to 300 SFPS in air and 0 to 10 FPS in...

RF Level Switch can be easily calibrated.

Cote-Shield(TM) circuitry allows Ztron(TM) RF Level Switch to ignore coatings and build-up on sensing elements. Dust or tunneling will not produce false signals. Level switch reacts only to actual high- or low-level conditions. Integral, 1-piece design allows for ease of installation through one 3/4-inch vessel opening.

Programmable Limit Switch offers .088 deg repeatability.

Compact multifunction PLS 1000 provides direct remote control of timing and dwell settings in applications that require events to occur in specific sequence. Microcomputer-based switch has brushless resolvers for absolute position feedback, 8 inputs and 16 programable high power outputs. Ten independent programs can be stored, changed, and initiated via splash-proof tactile keyboard, or RS232C...

Top Design Engineering Considerations For Optical Assemblies

In this eBook, we provide an overview of the design engineering considerations to keep in mind when planning the manufacture of an optical assembly.

Miniature Switch is suited for limited space applications.

EISM5-100T 5-port switching hub segments Ethernet network into 5 separate collision domains, acting as bridge to increase network diameter. One port can be used as uplink port to connect 2 hubs together, elminating need for crossover cable. Unit meets regulatory agency approvals and supports redundant power connections and low voltage AC or DC power sources. Activity/link/data rate LEDs exist for...

Off-On Switch offers solder lug or insulated wire lead.

Off-On Latching Pushbutton Switch provides visual indication of switch state with 2-position actuator. It mounts in 13.6 mm hole and projects behind front panel less than 20 mm. It offers shock and vibration resistance, round and square panel bezels, and illumination options. Maximum current/voltage rating is 100 mA at 24 VDC with life of 200,000 cycles, 2A at 125 VAC with life of 10,000 cycles....

Video Matrix is suitable for signal routing.

Suitable for video and R.F. signal routing, Video Matrix model 10693 is rated for DC output to 100 MHz, and offers 32x32 Coaxial Matrix; bi-directional, 3-stage design; and RS-232C/IEEE-488 interface. It can recall up to 40 configurations, and incorporates front panel keyboard control and LCD display. Its rackmount design measures 8.75 x 19.00 x 17.00 in. (H x W x D).

Electrical Switches are sealed via O-ring.

Series M PCB-mounted toggle, rocker and pushbutton switches have interior bushing area sealed with O-ring surrounding actuator. System seals out contaminants and protects against washing fluids and other liquids. Terminals are epoxy sealed to lock out contaminants such as flux and solvents. All models can be specified single or double pole, are UL and CSA recognized, have UL94V-0 flammability...

Pushbuttons, Switches and Indicators have low, neat profile.

Modular Series 61 includes round, square, and rectangular flush-mounted pushbuttons and indicators as well as two- and three-position key and selector switches. All protrude only 2 mm from front of panel. Rated at 250 Vac and 5 A, components are oil and water resistant, meet IP 65 front protection standards, and have gold-plated silver contacts with choice of plug-in or soldered terminals....

Crosspoint Switch is software controllable.

2 x 1 Electronic SCSI Crosspoint Switch allows 3 independent SCSI buses to be selected and electronically connected through automated switching. It provides 1-button control, Ethernet LAN serial port connections, and automatic internal termination. Included software allows users to remotely operate and control SCSI port configurations, termination, report SCSI bus activity, and gather performance...

Optimize Your Workforce with Weavix™ by PK Industrial

The Weavix™ platform takes productivity, quality, and visibility to a new level by providing better communication and real-time KPIs. Check out the video to learn more!