Stepper Motor Controllers and Drives

SSI Interface in JVL Integrated QuickStep Motors
Stepper Motor Controllers and Drives

SSI Interface in JVL Integrated QuickStep Motors

Connection of absolute encoders with SSI-interface The firmware of JVL's QuickStep motors has been extended with yet another function: an SSI encoder interface. It is thus possible to integrate absolute encoder functions in the QuickStep integrated stepper motors and in the stepper motor controller SMC75. Typically, absolute-encoders are used when there is a need to continue operation immediately...

Read More »
Microstepping Motor Drive is 170 V bus, AC line-powered.
Stepper Motor Controllers and Drives

Microstepping Motor Drive is 170 V bus, AC line-powered.

Capable of driving 4, 6, or 8 lead step motors, SD17040C provides switch selectable motor current of 1.0-4.0 A and 16 microstep resolutions, up to 50,800 steps/rev. It requires no additional power supply and has board-level components rated to 105°C. Measuring 2.1 x 4.0 x 6.2 in., compact drive offers panel or side mounting options and can be installed into tight spaces. Safety features...

Read More »
Integrated Step Motor Drive includes programmable I/O ports.
Stepper Motor Controllers and Drives

Integrated Step Motor Drive includes programmable I/O ports.

Combining 1.8° hybrid step motor with microstep drive and intelligent controller, Accuriss(TM) Series features embedded command language that allows users to execute real-time motion commands or write programs that can be executed with start command, upon power-up, or via input signals. Measuring 1.1 in. across, Accuriss 28 is capable of microstepping up to 1,600 steps/rev, while Accuriss...

Read More »
Stepper Motor Controller has resolution of 1,600 step/rev.
Stepper Motor Controllers and Drives

Stepper Motor Controller has resolution of 1,600 step/rev.

Supplied as 57 x 57 mm PCB, SMC75 offers everything required to solve modern control task as standalone controller or controlled from PLC/PC via serial commands or I/O. It incorporates RS485 and CANbus serial interface as well as 8 I/Os that can be configured as inputs, outputs, or analog input - controllable via nanoPLC and MacTalk graphic programming. MODBUS RTU and CANopen facilitate and...

Read More »
Motion Control provides step, torque, and speed modes.
Stepper Motor Controllers and Drives

Motion Control provides step, torque, and speed modes.

When applied to step motors, MDrive AccuStep System prevents loss of synchronization due to transient or continued overload, extreme acceleration or deceleration, or excessive slew speed. One version includes integrated step motor, microstepping driver, and internal encoder, while another version adds fully programmable motion controller. Applications include point-to-point positioning, conveyor...

Read More »
Stepping Motors/Drives suit motion control applications.
Stepper Motor Controllers and Drives

Stepping Motors/Drives suit motion control applications.

Available in NEMA 17, 23, and 34 sizes, SureStep Stepping Motors include bi-polar models with output torques from 61-1,291 oz-in. Units feature pigtail cable with locking connector and 200 steps/revolution. Advanced Programmable SureStep Drives offer software-selectable resolution up to 51,200 steps/revolution and power capability up to 10 A/phase. Available for drives and motors, unregulated...

Read More »
Stepper Motor Controllers and Drives

Microstepping Motor/Drivers offer encoder options.

CMK Series 2-phase microstepping drive and motor packages include 2.22 in.Â-² round shaft frame size version of PK-P motor as well as standard encoder models with 1.38, 1.65, 1.97, and 2.22 in.² round shaft motor frame sizes. Encoder models are available with 200 or 400 lines and 2 or 3 channels, and motors featuring 1.8°/step and 0.9°/step resolutions are available with...

Read More »
Motor/Drive Packages offer NEMA size 14 motor option.
Stepper Motor Controllers and Drives

Motor/Drive Packages offer NEMA size 14 motor option.

Suited for limited-space applications, MDrive14Plus products integrate NEMA size 14 brushless 1.8° stepping motor with electronics. Units are 2 in. high x 1.4 in. wide, with lengths of 2 in. for single motor or 3 in. for triple motor, which provides holding torque at 36 oz-in. Capable of full 256 x 200 microstepping with 12-48 Vdc integrated driver, MDrive14Plus systems feature extended...

Read More »
Integrated Stepper Motor/Drive operates at up to 1,500 rpm.
Stepper Motor Controllers and Drives

Integrated Stepper Motor/Drive operates at up to 1,500 rpm.

Model STM23 is size 23 motor and drive, contained in aluminum heatsink housing, with RS232/RS485 interfaces for programming drive using rich instruction set software. Motor operates in closed loop mode and coding can be downloaded to drive or unit can be controlled using commands from attached controller. With supply of 12-80 Vdc and 0.2-5 A peak output current, it is offered in single or double...

Read More »
Stepper Motor Controllers and Drives

Applied Motion Products' New ST Series of Programmable Microstep Drive & Integrated Motor Products

November 24, 2008 Watsonville, CA- The ST series of step motor drives from Applied Motion Products is designed to offer machine builders a range of drives suitable for a wide variety of applications, but with a common learning curve when it comes to setup and programming. The drives use Configurator(TM) software to set up the required parameters and have a choice of Q or the Si, Simple Indexer,...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers