Stepper Motor Controllers and Drives

Nippon Pulse Motion Checker Controller Eases Prototyping
Stepper Motor Controllers and Drives

Nippon Pulse Motion Checker Controller Eases Prototyping

The Nippon Pulse Motion Checkers are palm-sized controllers that contain an integrated driver circuit and are designed to offer engineers an easy and affordable option to drive and control two-phase stepper motors during the prototyping and analysis phase. There are four Motion Checker options, depending how complicated prototyping is: The Motion Checker 1 is designed to make a stepper motor spin...

Read More »
Haydon Kerk Motion Solutions Makes Stepper Drivers Available for 24 Hour Shipment
Stepper Motor Controllers and Drives

Haydon Kerk Motion Solutions Makes Stepper Drivers Available for 24 Hour Shipment

Haydon Kerk Motion Solutions, Inc., a premier manufacturer of engineered linear motion products, announces the addition of stepper motor drivers available for 24 hour shipment. A variety of stepper drivers can be found online on the Haydon Kerk Engineering Development Center (http://prototypes.haydonkerk.com). There's a stepper driver offered for immediate shipment that will work with virtually...

Read More »
Oriental Motor Now Offers Encoder Options for All Angles of Stepping Motors
Stepper Motor Controllers and Drives

Oriental Motor Now Offers Encoder Options for All Angles of Stepping Motors

First time offering from Oriental Motor provides customers purchasing stepping motors with more options than ever before. Torrance, CA - Oriental Motor is pleased to announce that encoder options are now available for their 0.36Â-º and 0.72º stepping motors. With the addition of the encoder option to 0.36º and 0.72º stepping motors, Oriental Motor's entire range of...

Read More »
Stepper Controller supports 1-4 axes.
Stepper Motor Controllers and Drives

Stepper Controller supports 1-4 axes.

Supplied complete with drives, power supply, I/O, enclosure, and software, Model iMC-P1 provides eight 24 Vdc inputs and eight 24 Vdc outputs. Rugged enclosure includes Start, Stop, and Reset buttons. Step size function can be changed, via dip switches, from full to half to micro-step. Able to perform linear and circular interpolation, controller includes PalPC motion control software and is...

Read More »
Universal Stepping Motor Controller has single-axis design.
Stepper Motor Controllers and Drives

Universal Stepping Motor Controller has single-axis design.

Operated via RS-232C, CANopen, and USB interface, SCX10 universal controller uses internationally recognized periphery standards for consistency over range of applications. Device includes Immediate Motion Creator for CM/SCX Series software for control via PC. Unit can store 100 sequence programs and can be used either in open- or closed-loop system. Function for external encoder inputs, enabling...

Read More »
Stepper Motor Controllers and Drives

PCD45x1 Series Controls Two-Phase Stepper Motors

RADFORD, VA--Nippon Pulse's PCD45x1 series controller chips are programmable pulse generators that are equipped with an excitation sequence generator circuit that allows for the driving of two-phase steppers motors. The PCD45x1 series is a low-cost option and eases the user's ability to configure a multi-axial motion control system. The PCD4541 controls four axes, the PCD4521 two axes, and the...

Read More »
UL-Listed Stepper Drives suit OEMs and machine builders.
Stepper Motor Controllers and Drives

UL-Listed Stepper Drives suit OEMs and machine builders.

Tested by UL to recognized safety standards, SD17040/SD31045/SD17060 series are rated for operation in ambient temperatures from 0 to +50°C and provide range of features: network connectivity, onboard indexers, encoder feedback, and simplified set-up. Self-contained products have their own power supplies and offer 4.0-9.8 Amp RMS output current. Additionally, high-voltage version is...

Read More »
Stepper Motor Drive incorporates GUI to facilitate setup.
Stepper Motor Controllers and Drives

Stepper Motor Drive incorporates GUI to facilitate setup.

Built to RoHS standards, IDEA(TM) electronic drive is fully programmable via on-screen buttons. Motor and drive parameters are automatically populated based on entered Haydon actuator part number, and default values can be adjusted as long as they remain within safe range. Users can also troubleshoot programs using line-by-line or multiple line program execution using debug feature. Additionally,...

Read More »
Stepping Motors and Drivers include built-in controller.
Stepper Motor Controllers and Drives

Stepping Motors and Drivers include built-in controller.

Offering output torque from 3.2-35 lb-in., CRK Series 5-Phase Stepping Motors come in standard and high-resolution versions with resolutions up to 0.00288°/step and 0.00144°/step, respectively. Built-in RS-485 compatible controller packages allow for up to 16 axes to be controlled from one RS-485 Master controller. Five network communications rates up to 115,000 bps can be selected....

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers