Stepper Motor Controllers and Drives

Stepper Motor Controllers and Drives

aStep Product Family Goes RoHS Compliant

Torrance, CA - ORIENTAL MOTOR USA CORP. now offers the entire aSTEP product family as RoHS compliant. The RoHS directive restricts the use of 6 hazardous substances in electric and electronic equipment. The aSTEP is an innovative stepping motor and driver unit that uses closed-loop control to eliminate missteps and loss of synchronism. The aSTEP uses a newly developed sensor to detect the step...

Read More »
Gate Driver features integrated microstepping translator.
Stepper Motor Controllers and Drives

Gate Driver features integrated microstepping translator.

Suitable for driving medium to high-power bipolar 2-phase stepper motors, dual full-bridge Model A3986 provides all necessary circuitry to ensure that gate-source voltage of high-side and low-side external MOSFETs is above 10 V, and gate capacitance is quickly charged and discharged. Two sinusoidal DACs generate reference voltage for 2 separate fixed-off-time PWM current controllers. Full step to...

Read More »
A Guide to Quality Control of the SMT Process
Sponsored

A Guide to Quality Control of the SMT Process

The printed circuit board (PCB) manufacturing process begins with cutting-edge equipment capable of accurately picking and placing up to 40,000 components per hour. This innovative equipment keeps error rates extremely low, and those defects that do occur are quickly caught by sensitive laser and optical inspection equipment.

Read More »
Stepping Motor Drivers feature current rating over 2 A.
Stepper Motor Controllers and Drives

Stepping Motor Drivers feature current rating over 2 A.

Toshiba TB6560HQ/FG 2-phase Bipolar Stepping Motor Drivers offer 0.6 W (HQ)/0.75 W (FG) on-resistance through use of BiCD process with thermally dissipative package. Supporting 2-phase/1-2-phase/W1-2-phase/2W1-2-phase excitation modes and forward/reverse mode, units can drive 2-phase bipolar type stepping motors using only clock signal. Input voltage is compatible with 3.3 or 5 V, and motor power...

Read More »
Step Motor Systems offer basic step angle of 0.36-
Stepper Motor Controllers and Drives

Step Motor Systems offer basic step angle of 0.36-

RoHS-compliant Series CRK-M consists of 5-phase step motor and driver models, 8 with single shaft extension and 8 with double shaft extension. Basic step angle can be adjusted to achieve any 2-phase step motor step angles. Direct switchover from 2-phase microstep mode can be performed without having to change input pulses. Available frame sizes range from 1.10 in. with holding torque of 5.9...

Read More »
MDrive17Plus with Plus Generation Patented Technology
Stepper Motor Controllers and Drives

MDrive17Plus with Plus Generation Patented Technology

Now with 2nd generation patented technology, the MDrive17Plus Motion Control from IMS provides advanced current control delivering unsurpassed performance and smoothness in a fully integrated microstepping driver/motion controller/NEMA17 high-torque brushless motor design. By applying innovative techniques to control current flow through the motor, resonance is significantly dampened over the...

Read More »
Distributed Motion Control with Technosoft Universal Drive Solution
Stepper Motor Controllers and Drives

Distributed Motion Control with Technosoft Universal Drive Solution

Using MotionChip(TM) DSP Control Technology, Technosoft has developed a family of intelligent, universal drives, based on customer requirements: IDMx40 Intelligent Servo Drives, IDSx40 Intelligent Stepper Drives, IPS110 / IBL2403 Intelligent Minidrives, ISM4803 / ISCM4805 Intelligent Control Modules. These high-performance intelligent products represent a true universal drive solution covering...

Read More »
Stepper Motor Controllers and Drives

Stepper Drives operate within Q programming environment.

STAC6-Q Stepper Drives provide current output from 0.5-6.0 A with 90-135 Vac input, 50/60 Hz, and provide software selectable resolutions from 200-51,200 steps/rev at speeds up to 133 rps. Self-test and auto setup features measure and configure motor parameters, while anti-resonance technology eliminates midrange instability for high motor speeds. Q programming language offers options for...

Read More »
3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership
Sponsored

3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership

At 3Sixty Mission Critical, we specialize in maintaining the performance and uptime of our customer's mission-critical applications. Our services are comprehensive and designed to take on the entire burden of maintenance. Our "UPS as a service" is just another example of how we develop out of the box solutions to help our customers operate more efficiently; see our video to earn more.

Read More »

All Topics