Signal Conditioners

Signal Conditioners

Signal Conditioner IC fosters Thunderbolt technology adoption.

Used at each end of Thunderbolt(TM) active copper cables as in-connector transceiver chip, GN2033 allows reliable, error-free transmission of high-speed data. Thunderbolt utilizes dual bi-directional channels operating at 10 Gbps per port to concurrently support data and display over single electrical cable. Copper cables enabled by GN2033 will provide path to utilizing performance and...

Read More »
Signal Conditioner amplifies and filters load cells, strain gages.
Signal Conditioners

Signal Conditioner amplifies and filters load cells, strain gages.

Measuring 3.78 x 1.06 x 1.65 in., DIN Rail mount Model 4710 is designed for load cell, strain gage, or single ended analog amplification and filtering. DC powered module contains instrumentation amplifier; 0-10 Vdc filtered output with frequency response of DC to 10 Hz; and 10 V excitation supply capable of driving 350 ohm bridge. Connections are made via screw clamp terminal blocks, and 0-30 mV...

Read More »
Pulse Conditioner suits power monitoring applications.
Signal Conditioners

Pulse Conditioner suits power monitoring applications.

Equipped with 2 inputs, Model JH2376 accepts waveforms as low as 20 mV peak-to-peak or as high as 250 Vrms, and transforms them to fully isolated 5 V logic output pulses. Unit's low level input amplifies and conditions millivolt tachometer and turbine signals, while high input safely isolates and monitors power and variable frequency drive waveforms. Available with 115 or 230 Vac power options,...

Read More »
Signal Conditioners

Capacitive Sensor Signal Conditioner offers 14-bit resolution.

Delivering 0.25% FS output accuracy, Model ZSSC3122 cLite features operating current as low as 60 Â-µA over entire voltage range of 1.8-5.5 V. Built-in sleep mode lowers current consumption to less than 1 µA for temperatures up to 85°C. Accommodating single and differential input sensor configurations, mixed-signal device can be configured to interface with capacitive sensors...

Read More »
Digital Signal Conditioner works with strain gage extensometers.
Signal Conditioners

Digital Signal Conditioner works with strain gage extensometers.

Equipped with 16-character auto identifying display, CellMite® Model 4337 works with strain gage extensometers used to test steel or other industrial testing applications. Unit connects directly to standard strain gage transducer and simultaneously generates serial output for direct connection to PC as well as scalable ±10 V analog output for interface to DAQ systems. Conditioner also...

Read More »
Strain Gage Signal Conditioner has various fixed gain options.
Signal Conditioners

Strain Gage Signal Conditioner has various fixed gain options.

Housed in shielded 1 x 2 in. case attached to mounting flange, 6202 Series provides excitation, amplification, and filtering for any strain gage-based measurement or control system. Module provides fixed +10 Vdc excitation voltage with up to 30 mA current and can drive single 350 ohm load cell/strain gage. Amplifier has 0-10 Vdc output, which is rated at -3 V to +15 Vdc, and extraneous noise is...

Read More »
RTD Signal Conditioners have USB interface for PC-based setup.
Signal Conditioners

RTD Signal Conditioners have USB interface for PC-based setup.

Model ST131 ASIC-driven RTD transmitters include digital USB setup and calibration interface and are designed for operation in harsh environments, in temperatures from -40 to +80°C. Providing electrical noise immunity and surge protection, DIN Form B head-mount instruments also have non-polarized and reverse polarity protected output. Windows configuration software is include and units...

Read More »
Signal Conditioner connects different devices in control system.
Signal Conditioners

Signal Conditioner connects different devices in control system.

By providing signal conversion and isolation between 2 incompatible signals, AX130200 can assist system integrator in connecting several different devices in control system. This model, in addition to converting PWM signal between 50 Hz and 50 kHz into 0-20 mA current signal, also provides full isolation between input, output, and power supply. Supplied in IP40 DIN rail housing, conditioner...

Read More »
Signal Conditioners

Analog Devices' Data Converters Enable Hands-free, "Eyes Only" User Control Technology

National Instruments designs ADI converters and amplifiers into system that allows players to control video games with their eyes. NORWOOD, Mass. -- Analog Devices (ADI), the worldwide data converter market share leader*, announced today that National Instruments, a leading global supplier of hardware and software for engineers, used ADI's data converters in a breakthrough user interface...

Read More »
Signal Conditioners

Macro Sensors Demonstrates Calibration of EAZY-CAL(TM) LVDT Signal Conditioner on YouTube

Pennsauken, NJ, October 27, 2010...Macro Sensors (www.macrosensors.com) provides instructions on how to connect, install and calibrate the EAZY-CAL(TM) MME-1000 mini-module, the world's most user-friendly LVDT signal conditioner, on http://www.youtube.com/user/MacroSensorsSales?feature=mhum. The YouTube video shows that a virtually effortless fingertip calibration routine can be used to field...

Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Sponsored

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics