Signal Conditioners

Resistive Sensing Conditioner offers 24-bit measurement.
Signal Conditioners

Resistive Sensing Conditioner offers 24-bit measurement.

Supplied in 6 x 6 mm VQFN package, Model PGA900 provides precise 24-bit measurement of conditions such as pressure, strain, flow, or liquid levels. One-chip solution integrates 2 low-noise 24-bit ADCs to enable high-resolution signal acquisition, 14-bit DAC to provide highly linear analog outputs, and variety of output interfaces, including analog voltage, 4–20 mA current loop, SPI, I(2)C,...

Read More »
Universal Signal Conditioners offer 480 switchable input settings.
Signal Conditioners

Universal Signal Conditioners offer 480 switchable input settings.

ProLine P27000 series can simplify galvanic isolation and conversion of input signals, ranging from ±20 mV to ±200 V and ±0.1 to 100 mA, across multiple measurement types within one device. Transmission speeds are as fast as T90 = 70 Â-µsec, and onboard transformer isolation and digitally controlled range selection promote repeatable signal transmission with total...

Read More »
FPGA Mezzanine Card features signal conditioning.
Signal Conditioners

FPGA Mezzanine Card features signal conditioning.

Suited for high-speed networking, Model FMC109 features quad SFP/SFP+ transceivers for 10 GbE in copper or fiber formats. Mezzanine module has 4 re-timers on board which provide tuning for Tx and Rx signals. Re-timer ICs provide input equalization, clock and data recovery, and output de-emphasis. This also allows for use of longer copper cables as distortion is cleaned across farther distances.

Read More »
Signal Splitter allows dual transmissions.
Signal Conditioners

Signal Splitter allows dual transmissions.

Used with 7.5 or 15 mm rails, DIN Mounted Interface Converter enablesÂ- outputs from single encoder to be sent to 2 control systems. Unit provides signal level conditioning to support both RS422 and HTL input or outputs. Galvanic isolation up to 1 kV between input and outputs prevents current loops and signal crosstalk from occurring. Powered by 9–30 Vdc supply, which is then distributed...

Read More »
AC LVDT Signal Conditioner offers pushbutton calibration.
Signal Conditioners

AC LVDT Signal Conditioner offers pushbutton calibration.

Able to be set up within minutes, DIN-rail mounted SC-100 module works with AC-operated LVDTs, RVDTs, and inductive half-bridge position sensors as well as Marposs and Solartron analog pencil gaging probes. Features include provides RS-485 digital communications link, GUI, and LVDT setup with built-in null indication and front panel pushbuttons to set zero and full scale. Choices include 4 LVDT...

Read More »
LVDT/RVDT Signal Conditioner offers interface for networked PLCs.
Signal Conditioners

LVDT/RVDT Signal Conditioner offers interface for networked PLCs.

AnyNET I/O ANR2 integratesÂ- network connection and expansion capabilities to provide LVDT/RVDT feedback solution for any PLC-based system. Allowing users to interface up to 12 LVDT or RVDT sensors using one network connection, product expands up to six 2-channel modules. Interface is programmable via host PLC's software and directly connects to 3-/4-/5-/6-wire and half bridge LVDT...

Read More »
Macro Sensors LVDT Gage Heads Replace Failing Units on Automotive Parts Production Line
Signal Conditioners

Macro Sensors LVDT Gage Heads Replace Failing Units on Automotive Parts Production Line

Macro Sensors LVDT gage heads are being used on an automated auto part production line as part of a quality control system that ensures the precise dimensions of hydraulic valve adjusters manufactured for use in different car engines. Every automobile uses a number of different engine valves mounted on the cylinder head that allows air flow in and out of the cylinder.Â-  A 4-cylinder engine...

Read More »
Signal Conditioners

Current Switches monitor large loads.

Combining current transformer and signal conditioner, ASXP-LS Current Switches monitor large machines for over- or under-load conditions, detect open discharge lines, and sense clogged filters. Split-core housing allows sensor to be installed over existing conductors, while 2.3 x 3.42 in. sensing aperture accommodates conductors and multiple wires per phase. Offered inÂ- 4 models with trip...

Read More »
Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring
Sponsored

Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring

Krueger Sentry Gauge, a leader in chemical sight gauges, now offers the ultimate in aggressive liquid storage monitoring devices. From sulfuric and hydrochloric acid to bleach, and acetone, our products are designed with robust features that deliver a long and trouble-free service life. See our video to learn all about this new and innovative line of sight gauges.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers