Signal Conditioners

In-Line Signal Conditioner provides 500 Vdc I/O isolation.
Signal Conditioners

In-Line Signal Conditioner provides 500 Vdc I/O isolation.

Housed in rugged stainless steel enclosure, which is connected between transducer and readout instrument, OMEGA® IN-UVI Wheatstone Bridge Universal In-Line Signal Conditioner is suited for applications where transducer must be located in hostile environment or some distance away from display. Unit supplies highly regulated bridge excitation voltage for transducer or load cell and converts...

Read More »
Ultra-Precise Spring-Loaded LVDT Linear Position Sensors Ensure Proper Operation of Pneumatic Cylinders
Signal Conditioners

Ultra-Precise Spring-Loaded LVDT Linear Position Sensors Ensure Proper Operation of Pneumatic Cylinders

Pneumatic devices are used in material handling and processing systems to push, pull, lift, and close and open doors.Â-  They are also used to hold and remove materials and position pieces for manufacturing.  Compressed air is used to move a pneumatic cylinder.  When compressed air enters the base of a pneumatic cylinder, it pushes on the piston and makes the piston rod move...

Read More »
Signal Conditioners

Concurrent Presents New Simulation Solutions at the 2015 Automotive Testing Expo

ATLANTA - Concurrent (NASDAQ: CCUR), a global provider of high-performance Linux® and storage solutions, today announced it will showcase its automotive simulation and testing solutions at the 2015 Automotive Testing Expo in Detroit, MI, October 20(th)-22(nd).Â-  The company will also present a session entitled Rapid Prototyping and Hardware-in-the-Loop Test System Architectures,"...

Read More »
Resistive Sensing Conditioner offers 24-bit measurement.
Signal Conditioners

Resistive Sensing Conditioner offers 24-bit measurement.

Supplied in 6 x 6 mm VQFN package, Model PGA900 provides precise 24-bit measurement of conditions such as pressure, strain, flow, or liquid levels. One-chip solution integrates 2 low-noise 24-bit ADCs to enable high-resolution signal acquisition, 14-bit DAC to provide highly linear analog outputs, and variety of output interfaces, including analog voltage, 4–20 mA current loop, SPI, I(2)C,...

Read More »
Universal Signal Conditioners offer 480 switchable input settings.
Signal Conditioners

Universal Signal Conditioners offer 480 switchable input settings.

ProLine P27000 series can simplify galvanic isolation and conversion of input signals, ranging from ±20 mV to ±200 V and ±0.1 to 100 mA, across multiple measurement types within one device. Transmission speeds are as fast as T90 = 70 Â-µsec, and onboard transformer isolation and digitally controlled range selection promote repeatable signal transmission with total...

Read More »
FPGA Mezzanine Card features signal conditioning.
Signal Conditioners

FPGA Mezzanine Card features signal conditioning.

Suited for high-speed networking, Model FMC109 features quad SFP/SFP+ transceivers for 10 GbE in copper or fiber formats. Mezzanine module has 4 re-timers on board which provide tuning for Tx and Rx signals. Re-timer ICs provide input equalization, clock and data recovery, and output de-emphasis. This also allows for use of longer copper cables as distortion is cleaned across farther distances.

Read More »
Signal Splitter allows dual transmissions.
Signal Conditioners

Signal Splitter allows dual transmissions.

Used with 7.5 or 15 mm rails, DIN Mounted Interface Converter enablesÂ- outputs from single encoder to be sent to 2 control systems. Unit provides signal level conditioning to support both RS422 and HTL input or outputs. Galvanic isolation up to 1 kV between input and outputs prevents current loops and signal crosstalk from occurring. Powered by 9–30 Vdc supply, which is then distributed...

Read More »
AC LVDT Signal Conditioner offers pushbutton calibration.
Signal Conditioners

AC LVDT Signal Conditioner offers pushbutton calibration.

Able to be set up within minutes, DIN-rail mounted SC-100 module works with AC-operated LVDTs, RVDTs, and inductive half-bridge position sensors as well as Marposs and Solartron analog pencil gaging probes. Features include provides RS-485 digital communications link, GUI, and LVDT setup with built-in null indication and front panel pushbuttons to set zero and full scale. Choices include 4 LVDT...

Read More »
LVDT/RVDT Signal Conditioner offers interface for networked PLCs.
Signal Conditioners

LVDT/RVDT Signal Conditioner offers interface for networked PLCs.

AnyNET I/O ANR2 integratesÂ- network connection and expansion capabilities to provide LVDT/RVDT feedback solution for any PLC-based system. Allowing users to interface up to 12 LVDT or RVDT sensors using one network connection, product expands up to six 2-channel modules. Interface is programmable via host PLC's software and directly connects to 3-/4-/5-/6-wire and half bridge LVDT...

Read More »

All Topics