Signal Conditioners

Servo Extension enables 180 degree rotation.
Signal Conditioners

Servo Extension enables 180 degree rotation.

Plugging in between controlling source and servo, Servo StretcherÂ- modifies signal to servo, enabling it to rotate up to 90º in either direction off center position. Total amount of rotation is dependent on type of radio control or servo controller. Users can limit each endpoint separately from center position, and adjust center position separately from endpoints....

Read More »
AC-LVDT Signal Conditioner offers digital communications.
Signal Conditioners

AC-LVDT Signal Conditioner offers digital communications.

Engineered to work with wide range of AC-LVDTs, RVDTs, and inductive half-bridge sensors, DIN rail-mount Model S1A features built-in null indication and front panel pushbuttons to set zero and full scale. Unit offers choice of 4 excitation frequencies, 8 analog outputs, and RS-484 digital communications. For installations where there are multiple position sensors, signal conditioners can be...

Read More »
Isolated Analog Signal Conditioners interface to DC LVDTs.
Signal Conditioners

Isolated Analog Signal Conditioners interface to DC LVDTs.

Featuring 10 modules with input ranges from -1 to +1 V through -5 to +5 V, Series 8B43 isolates, filters, and amplifies voltage input signal, then provides analog voltage output. Modules interface to DC LVDTs which operate on 10 V excitation voltage and up to 20 mA of excitation current. Housed in miniature 1.11 x 1.65 x 0.4 in. package, signal conditioners provide ±0.05% accuracy,...

Read More »
Optical Isolator Modules solve noisy signal issues.
Signal Conditioners

Optical Isolator Modules solve noisy signal issues.

Providing 1,800 V optical isolation, Model FC-ISO-C is designed with 3 complementary open collector outputs rated for 5-36 Vdc that can be used in single-ended configurations, while Model FC-ISO-D features 3 differential line driver outputs rated for 5 Vdc. Modules have 3 complementary inputs rated for 4.5-7.5 and 12-26 Vdc with frequency response up to 1 MHz. Both include integral 35 mm DIN rail...

Read More »
Signal Conditioner supports load cells and strain gauges.
Signal Conditioners

Signal Conditioner supports load cells and strain gauges.

Featuring 0-30 mV input range, Model 4720 contains precision instrumentation amplifier, 4-20 mA filtered output with frequency response of DC to 10 Hz, and built-in 10 V excitation supply capable of driving 350 W bridge. Connections are made via screw clamp terminal blocks, and Zero and Span adjustment potentiometers are located externally. Measuring 3.78 x 1.06 x 1.65 in., DIN rail mount unit is...

Read More »
Small Isolated Digital I/O Signal Conditioning Boards for Industrial Embedded Computer Systems
Signal Conditioners

Small Isolated Digital I/O Signal Conditioning Boards for Industrial Embedded Computer Systems

Arlington, TX - WinSystems today introduced two new isolated digital signal conditioning and termination boards for OEM embedded computer system designers. These small form factor boards are needed in applications requiring signal isolation between a computer and its monitoring/control points. The ISM-TRM-RELAY has 16 independent, Single Pole Double Throw (SPDT) relays. The ISM-TRM-COMBO provides...

Read More »
Signal Conditioner offers strain gage to PLC frequency input.
Signal Conditioners

Signal Conditioner offers strain gage to PLC frequency input.

Measuring 3.78 x 1.06 x 1.65 in., Model 6255 is designed for load cell, strain gage, or single ended analog amplification and filtering and contains precision instrumentation amplifier, 100-10,100 Hz filtered output, and built-in excitation supply. Latter can drive 350 ohm bridge, and 0-50 mV input promotes compatibility with strain gage-based load cell or pressure transducer outputs. This DIN...

Read More »
Signal Conditioners

Ultrasonic Signal Conditioner serves automotive applications.

Programmable PGA450-Q1, supplied in TSSOP-28 package, drives ultrasonic transducers in automotive park distance, blind-spot detection, or similar object detection applications. With configurable burst generator, low-noise amplifier, and 12-bit SAR ADC, IC provides for processing echo signals and calculating distance between transducer and object. Solution also incorporates physical layer for LIN...

Read More »
Signal Conditioners

Signal Sensor Conditioner combines amplification, ADC, DSP.

Used for calibrating resistive sensor modules, ZSSC3026 combines high-accuracy amplification, 16-bit precision analog-to-digital conversion, and 18-bit DSP for linearization and calibration. Product comes in PQFN, bumped die, or bare die; operates from 1.8-3.6 V; and has fully corrected digital output signal. Consuming less than 1 mA nominally and less than 100 nA in stand-by, IC has noise-free,...

Read More »
Signal Conditioners

Sensor Signal Conditioner has dual analog output interface.

For automotive and industrial applications, AEC-Q100 qualified ZSSC3154 can read out 2 different input signals. IC also measures temperature of full bridge sensor to compensate for offset, gain, and temperature coefficient as well as non-linearity failures. Digital compensation is also applied to ambient temperature sensor signal. Programmable configurations of 2 analog outputs allow reading both...

Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
Sponsored

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.

Read More »

All Topics