Signal Conditioners

Signal Conditioners

Ultrasonic Signal Conditioner serves automotive applications.

Programmable PGA450-Q1, supplied in TSSOP-28 package, drives ultrasonic transducers in automotive park distance, blind-spot detection, or similar object detection applications. With configurable burst generator, low-noise amplifier, and 12-bit SAR ADC, IC provides for processing echo signals and calculating distance between transducer and object. Solution also incorporates physical layer for LIN...

Read More »
Signal Conditioners

Signal Sensor Conditioner combines amplification, ADC, DSP.

Used for calibrating resistive sensor modules, ZSSC3026 combines high-accuracy amplification, 16-bit precision analog-to-digital conversion, and 18-bit DSP for linearization and calibration. Product comes in PQFN, bumped die, or bare die; operates from 1.8-3.6 V; and has fully corrected digital output signal. Consuming less than 1 mA nominally and less than 100 nA in stand-by, IC has noise-free,...

Read More »
Signal Conditioners

Sensor Signal Conditioner has dual analog output interface.

For automotive and industrial applications, AEC-Q100 qualified ZSSC3154 can read out 2 different input signals. IC also measures temperature of full bridge sensor to compensate for offset, gain, and temperature coefficient as well as non-linearity failures. Digital compensation is also applied to ambient temperature sensor signal. Programmable configurations of 2 analog outputs allow reading both...

Read More »
Signal Conditioning Board supports RS-485 communications.
Signal Conditioners

Signal Conditioning Board supports RS-485 communications.

Capable of driving 1 or 2 electrolytic tilt sensors, RS-485 Mini-Signal Conditioning Board can be integrated into larger control systems. Microprocessor-based PCB can be supplied with built-in dual-axis TrueTILT(TM) sensor for ±60° measurement, or operated with up to 2 external sensors to meet specific resolution, axis, and measurement range requirements. Both include built-in...

Read More »
Data Acquisition and Control System provides ±0.035% accuracy.
Signal Conditioners

Data Acquisition and Control System provides ±0.035% accuracy.

Operating from 7-34 Vdc power source, MAQ®20 comprises programmable, multi-channel signal conditioning I/O modules as well as communication modules that mount on 35 x 7.5 mm gull-wing DIN rail. Backbone mounts within rail to provide power and communication interconnections. One communication module can interface to up to 24 I/O modules to create system with up to 384 channels that fits...

Read More »
Opto-Isolated Digital I/O Signal Conditioning Boards for Small Form Factor Embedded Computer Systems
Signal Conditioners

Opto-Isolated Digital I/O Signal Conditioning Boards for Small Form Factor Embedded Computer Systems

Arlington, TX - WinSystems announced two new optically isolated signal conditioning and termination boards for OEM computer system designers. The ISM-TRM-ISO-IN provides 24 lines of optically isolated and digitally debounced inputs to provide easy connections and signal conditioning from field wiring. The ISM-TRM-ISO-OUT provides 24 lines of optically isolated outputs. To interface with field...

Read More »
Signal Conditioners

Self-Powered Booster Modules support HDMI cables up to 45 m.

Housed inside connector of thin HDMI eco-friendly cables, PRE169x Series achieves data rates of 3.4 Gbps per channel up to 20 m in length. Modules support 4K2K and 3D rates as well as 1440p DTV resolution, 16-bit color depth, and 120 Hz refresh rates. Embedded technology provides active equalization functionality without requiring external power source, compensating for signal attenuation on...

Read More »
Signal Conditioner offers local display of transducer values.
Signal Conditioners

Signal Conditioner offers local display of transducer values.

Used in stand-alone or panel-mounted mode, Model E725 enables local display of transducer values from variety of sources, including displacement, pressure, load, and torque, to be incorporated into control panels. Unit features 5-digit display with peak and valley detection, limit trips shown by indicator lights, and optional mechanical or solid state relay outputs. In addition to serial...

Read More »
Signal Conditioner works with charge mode and IEPE sensors.
Signal Conditioners

Signal Conditioner works with charge mode and IEPE sensors.

Microprocessor-controlled model 4020 incorporates charge amplifier when used with charge mode sensors or 4 or 10 mA, user-selectable current source with 20 Vdc compliance voltage when used with IEPE sensors. For each of its 3 channels, unit uses 12-bit DACs to set amplifier gains from 0.00-999.9 with 0.5% precision. UI facilitates programming of I/O sensitivities, which enables instrument to...

Read More »
Summing Transmitter powers up to 4 load cells.
Signal Conditioners

Summing Transmitter powers up to 4 load cells.

Powered by 115 Vac, 230 Vac, or 11-30 Vdc, Model 4800 has built-in excitation supply capable of delivering up to 120 mA at 10 V, more than enough to drive four 350 W load cells. Input is isolated from output and both are isolated from supply voltage, eliminating unwanted ground loop problems. Measuring 9.0 x 7.25 x 2.2 in., transmitter offers output options of 0-20 mA or 0-10 V and 4-20 mA or...

Read More »

All Topics